Hello. i'm working with 10 replicas and a design master, but when i tried to add new tables and forms i get the message (Error 3492) " The synchronization failed because a design change could not be applied to one of the replicas" and after that, i cant synchronize anymore!!!
i don't understand what could be the problem.
thanks if anyone can help.
Hello I have a perplexing problem …
I have been using replication successfully for years. Recently the PC where my Design Master resided crashed taking the hard drive with it. No problems I thought, I used a replica to recover the design master and placed it on the new hard drive (the OS and Access was upgraded from 2000 to XP, however the Access 2000 file format was retained – there are still a couple of laptops with only W2000 software). I understand that moving the path of replicas or design masters is no no, so I proceeded to start from scratch and create a complete new batch of replicas based from the new design master.
Everything was going to plan UNTIL a replica was routinely synchronized with the design master. The design master reverted back to a replica. I recovered the design master again, everything looking fine until again a synchronization causes the design master revert to replica.
Next plan of attack to hopefully fix a potential corruption problem: create a new blank database, import all (non-system) tables, compact and repair, and create a new replica from scratch. From the design master, I created the complementing replicas and sure enough the Design Master again reverted to a Replica after a routine synchronization.
I repeated this “start from scratch” procedure, and the same results prevailed. I am at a loss especially since I verified that the hidden system MSysReplicas table had only two entries after the Design Master and Replica were first created.
I would greatly appreciate any ideas of where to go next with this problem.
Thanking you for your time.
I have recently created a database meant for managing inventory. I have started writing queries and building forms, and a lot of it is running smoothly, but I am having a few snags.
To give a brief background, I am currently designing a form in which a user will fill out when an incoming part comes into our company. The form NEEDS to ask the user for at least the PartNumber and the PONumber, but the way I have my relationships set up, I am not exactly sure how to design the forms (not the physical layout, but where the data goes). So when I have an incoming part, will I use the PartPOID to figure out which part number and PO number it is? I am not exactly sure how to make a form for the user that is not confusing.
Attached is a picture of my relationships and my database.
New Compressed (zipped) Folder.zip
I've converted my DB into an MDE file as I understand this secures all the code and doesn't allow any changes to the database (table structure, queries, etc.).
However, when I now view my MDE file, I can still delete queries and change tables. But I cannot view forms in design mode and therefore get access to the code.
Any ideas?
Is there anyway to change the criteria in a field without going into design view I bascially need to be able to type in a particular item in a certain field in a query and it return all the results for that one.
The database has over 160000 records and when I try using a form it takes forever.
I'm trying to produce a report which uses a static deisgn and does not change. For example,I require in the detail of the report a table say 3 * 8 ....and in the report I need the data to fill each one of these cells. However I may not have 8 records , therefore I need the remaing columns/cells empty - the design of 3 * 8 must not change... at the moment I have a dynamic design so if i have 3 records I have 3 *3 table leaving a massive gap on the report.
View 2 Replies View RelatedIs there any way in access 2003 or 07 to track when a database was last synchronized with any one of it's replicas?
It would be useful to know and be able to store this in a table.
Hi
I'm totally stuck creating a form because I don't know how to set up my combo boxes. The database is about tiles and the forms for data entry to create an invoice with one combo box to hold the tile range eg: White, blue, etc. I want the second combo box to hold the details on the tile names of the range chosen in the first combo box. eg: if 'white' is selcted in the tile range combo box, then only the names of the white tiles should appear to be selected from in the 'tile name' combo box.I then have a separate field to display the price of the tile depending on the range chosen.
This is for some exam coursework and the guidelines specify that I'm not allowed to use VB or other code. Could someone please tell me how exactly I can sort this out so that the three are linked (2 combo boxes and the price field)?(queries?adjusting form properties?) All the details on tiles are stored in one table. Any guidance is greatly appreciated.Thank you so much.
-Camryn
We are running Access 2002 on Win2k. The database has been split into front and back ends, and synchronization occurs directly over LAN with 7 replicas. During synchronization I received a failure message "The search key was not found in any record. (Error 3709)."
I have tried several things found on Microsoft KB and other forums-- Compact and repair, removing indexes from memo fields, updated Jet and Microsoft Data Access Components-- but nothing has worked. Does anyone have any ideas on this one?
Thanks,
James
I have an Access 2002 database (about 120mb) which was replicated using Replication Manager (version unknown). It is set up to use Internet Synchronization. We use it on state government LAN and WAN as well as the Internet. It works well in most cases, but on a few computers we get the error "Http address not found" when synchronization is attempted. The address is indeed visible to those computers. We have determined that reloading Windows (XP Pro) will usually solve the problem at least for a while but when GIS mapping software is installed it reappears. More worrisome is that some brand new laptops with factory-installed Windows are showing the same problem, which means it could get worse as we upgrade equipment.
Has anyone else encountered this error?
MS Outlook contacts to MS Access database table to get in,MS Outlook contacts to an Access database?
View 12 Replies View RelatedTrying to sync between a back end database and one of the replicas we use. Getting the error "The search key was not found in any record" Error 3709 while peroforming ISAM Seek.
Does anyone know how to find the offending record that is causing the problem? It's not related to an indexed memo field either. The only field that is indexed is the AutoNumber Primary Key field.
The only other option I see is to bring up both tables, manually input the differences, and create a new replica.
Thanks!
I have created a form with sub-form and I would you tell me how I should do in order to screen data in sub-form transferred from main form. It looks like:
Main form
Employer
Client
Date_of_transaction
Number_bill_of_sale
Sub-form
Employer
Client
Greatness_of_order
Worth_of_transaction
It's about printed words. How should I do this properly?
The subform, which is in datasheet view, contains two dropdown boxes, Country and District (1-n). I want the district dropdown to only display records based on what's selected in the country dropdown. There will only ever be any content in District if one country is selected (let's say country 'A').
I've used the code below (one of many attempts!) to try to achieve this, but it doesn't seem to have the effect I want. It seems that if I select country 'A' from the country dropdown, the District rowsource is as expected for that particular record. However, the rowsource for every other District in the list of records in the subform also now has the same rowsource even where the country <> A.Similarly, if I select <>A from Country, the rowsource fro every district is now empty, even if the country selected in another row is A.
Dim strSQL As String
strSQL = "SELECT DistrictID, District, DistrictOrder "
strSQL = strSQL & "FROM tblDistrict "
strSQL = strSQL & "WHERE CountryID = " & Me.cmbCountryID & " "
strSQL = strSQL & "ORDER BY DistrictOrder"
Me.cmbDisctrictID.RowSource = strSQL
I have a main form with a subform. On my main form, I have a combo box set to "find a record on my subform, based on what I select in the combo box." This works great! At the same time, I want to use this main form combo box to synchronize with a combo box in the subform to display a value based upon the value selected in the main form's combo box. I have tried several things and searched Access newsgroups without success. I am using MS Access 2002, producing an Access 2000 database. Has anyone got any ideas? I could really use some help. Thank-You.
Denny G. :confused:
have a DB which is working fine on most PCs (approx 15 users) I do however have a problem sending emails from some machines (using a macro to do the send object as example below) The mail program used is Outlook 2000 / 2003
DoCmd.SendObject acReport, "Returns Notice", "SnapshotFormat(*.snp)", "to a defind list", True, ""
This works fine BUT on most machines but on a couple we get a fail message when attempting to send, this message is unspecific. I cannot find any different settings on the machines in question, the op system is 2000 / XP.
I operate the same program on my PC running XP prof servpk 2 and although 99% of the time the emails go through without issue I do sometimes have the same problem. Re-booting does not resolve it! and I can find no trend as to why I have the problem.
Any thought or advise welcome.
Hello again all... Today's problem is as follows.... I have an "after update" combo box that is coded as "CurrentDb.Execute "uno", dbFailOnError". I have an SQL Query named "uno" that is showing the following: "UPDATE [Input] SET [Input].Loc_Lng = [Loc-1L].Combo8, [Input].Loc_ID = "1", [Input].Loc_Desc = "xxxx";" I am trying to have the combo box update the values from the combo box into a blank table. When I try to run this, it comes up with the error: "Too few parameters. Expected 1". Any idea what that means, and then how to fix?
View 2 Replies View RelatedI'm fairly new to Access, so maybe someone can school me here...
I have a issue tracking database query reporting a serial number in the first column, an open issue date in the second column and close issue date in the third column. There can be several instances of each serial number.
I already figured out how to use DateDiff to get a time to fix column...
I want to have a column reporting the difference between the previous close date to the next open date (grouped by serial number).
Example
S/N Open Date Close Date Time to Fix MTBF
1234 1/10/2007 1/13/2007 3 5
1234 1/1/2007 1/5/2007 4
2222 1/2/2007 1/3/2007 1
Hi all
I'm stuck on the following SQL statement. It looks OK to me... but there must be something wrong with it because it doesn't execute.
I've tried the runSQL command and I've tried currentproject. connection.execute as well. Both fail to execute... it has to be the SQL string below.
Thanks for any advice.
SQLImportPE = "UPDATE data INNER JOIN data_import ON data.ID = data_import.ID" & _
"SET data.pe1 = data_import.pe1, data.pe2 = data_import.pe2, data.pe3 = data_import.pe3, data.pe4 = data_import.pe4, data.pe5 = data_import.pe5, data.effort_pe = data_import.effort_pe" & _
"WHERE (((data_import.pe1) Is Not Null));"
When I highlight a combo box, the default hotkeys should be alt+down or f4 to drop the menu down.The issue I'm having is that while alt+down works, f4 does not. I just got a new computer in my office, and f4 worked on the old one.My keyboard does not have a f-lock key on it. That seems to be the internet's general response to my problem, but that doesn't work.
View 2 Replies View Relatedhi There
I Have A Database Trying To Convert It To MDE I Get The Following Message
--------------------------------------------------------------------------
This error is usually associated with compiling a large database into an MDE file. Due to the method used to compile the database, a considerable number of TableID references are created for each table. The Microsoft Jet database engine version 4.0 can only create a maximum of 2048 open TableIDs at one time. Exporting a database as an MDE potentially can exceed this limit if the database has a large number of objects (table, macro, form, report, etc).
There is no accurate method to estimate the number of TableIDs the Jet database engine uses during the process of compiling a database as an MDE. However, each VBA module and each form uses one TableID, as a result, if the database has 500 forms, and each form's HasModule property is set to Yes, as many as 1,000 TableIDs are used.
Any Help Please
Thank You In Advance
My Access table has a record which my update query was unable to locate. This issue resolved when I removed the primary key and applied it again.
View 1 Replies View RelatedI admin an Access 2007 ADP that is distributed to our user base as an ADE. The back end is MSSQL 2005. Recently, we have begun deploying this software to employees in the field who connect to the corporate network via VPN. Because our field employees are sometimes connecting from some seriously flaky Internet connections, we have seen an uptick in Connection Failure errors.
I've been researching ways to detect and reestablish a failed network connection from VBA so that the user doesn't encounter the errors, or the need to close and reopen the application to continue working. This post appears to get me most of the way there, in that it both suggests a way to detect the failure and reestablish a connection on the fly:
[URL] ....
Basically, it suggests replacing the call to CurrentProject.Connection with a call to your own custom function, looking something like this:
Code:
Function fCurrentConnection () As ADODB.Connection
If CurrentProject.Connection.State = 0 Then
CurrentProject.OpenConnection "YourConnectionString"
End If
Set fCurrentConnection = CurrentProject.OpenConnection
End Function
My problem is that I define my connection in the built in server properties of the project. My users connect using Windows NT Integrated security. I don't know what I should put in the "YourConnectionString" area. Is there a way to tell Access to use the stored settings to reconnect, or alternatively, any example string that connects to a server name and database name using Windows NT Integrated security?
I have an append query which fails due to validation rules. There are no field validation rules, only enforced table relationships. There is an autonumber field which I am omitting from the INSERT and SELECT clauses in the hopes that it will take its next value.
How do I determine which fields are causing the problem? I have changed the query to a simple SELECT and manually typed in the resulting values with no problems. Note that ALL records I am attempting to add fail the rules.
Hi,
I feel a little silly bringin this up but I have gone through the solutions provided on this topic but it all doesnt seem to work.
I am trying to up date my Products table with data from two other tables (Sales and Stock Receipt). I have made sure the data types in all the tables are the same (currency) but I still get this message
"Microsoft Access did not update 5 field(s) due to a data type conversion failure."
This is the expression I'm using in the update query
IIf(IsNull(DSum("[Quantity]","Sales Detail","Sales Detail.[ProductID]=" & [Products].[ProductID])),[Products]![OpeningStockAmt],[Products]![OpeningStockAmt]-(DSum("[Quantity]","Sales Detail","Sales Detail.[ProductID]=" & [Products].[ProductID])*[Products]![CostAmountperUnit]))
Hi,
I am having problems with a DLOOKUP expression in an update query.
I have set up a lookup table (imported from Excel and another table set up myself because of this error) with a date field and a week number field and I am trying to return the week number into another table for the date in another field. It is easy to do in Excel (VLOOKUP), but I have never done this in Access.
I am attempting to get the update query to update another table which has a Date of Booking and a new week number field. When I run the query, it has the error message that it cannot update all of the records, due to a type conversion failure. I thought that this error was due to fields have dissimilar data types and changed them until they were exactly the same - the Week Number are both Long Integer number fields and the dates are a General Date date fields.
The expression is: DLookUp("DLOOKUP Created.Week Number","DLOOKUP Created","Date = " & [2004 Lookup].[Date of Booking]). The lookup table is DLOOKUP Created and this is the return value I want. The 2004 Lookup table is the table that I want to update with the week number, using the date of booking.
Any help will b gratefully receive.
All the best,
Roly