Hello,
Found this here and was trying to do the following. Delete rows in my table that are dupicates and put them into a new table.
Keep getting a syntax error.
SELECT DISTINCT * FROM tblRaw INTO tblClientcontacts
Anyone know why?
I have a table that has 12,000 rows. Out of those rows are 1600 uniques. I need to delete all the duplicates. Is this a way to do it?
Thanks.
When I'm runnig the query, I'm getting an error "syntax error in from clause".
I can't enter to "design" mode to find the error.
Would someone please tell me why I'm getting this error with this query?
select distinct
case_id
from closed cases g
where
sys_curr_date between #01/01/2005# and #12/31/2005#
and aft_case_status = 'O'
and not exists
( select 1 from closed cases X
where X.case_id = g.case_id
and X.aft_case_status = 'C'
and X.sys_curr_date = g.sys_curr_date )
Thanks
Hi I realised something adnormal about my asp program..hope someone can advise me on this
When I just to connect to my access DB using Microsoft's access driver(dsn approach), the program run fine and I can access all my tables correctly.
However now when I'm using OLEDB connection to connect instead, I encounter the problem of my program only being able to connect to certain tables in the DB only. The error msg that i received is as shown in the title :
"Syntax error in FROM clause"
I have list my connection string and code below, pls go on reading if you can help me.. thanks a lot !
The code below is my connection string:
<---------------------------------------------
Set cn = CreateObject("ADODB.Connection")
cn.Provider = "Microsoft.Jet.OLEDB.4.0"
cn.Properties("Data Source") = Server.Mappath("database/backup_20june/LiansengDB.mdb")
cn.Properties("Jet OLEDBatabase Password") = "P@55word"
cn.Open
................................................
and this is my code to access the tables
<--------------------------------------------
Dim RSlogin
Dim RSlogin_numRows
Set RSlogin = Server.CreateObject("ADODB.Recordset")
RSlogin.ActiveConnection = cn
RSlogin.open("SELECT * FROM User")
.................................................
strangely this code will give me error but if i access another table instead e.g "SELECT Name FROM Products ORDER BY Name ASC", there won't be any error at all...
I 'm really puzzled... any help will be appreciated!
Hi All,
Following is the query, when executed, I am getting the error as mentioned in the subject "Syntax error in FROM clause." The query beautifully works in SQL Server 2000 but not in MS-Access.
select distinct tblBusOperators.OperatorID,tblBusOperators.TradeNa me,tblBusOperators.isCurrent AS CurrOprtr,
tblRouteContracts.[Route No],tblRouteContracts.BusITContractNo,tblRouteContrac ts.isCurrent AS CurrContract
from
tblBusOperators JOINS tblRouteContracts on (tblBusOperators.OperatorId = tblRoutecontracts.OperatorID)
join tlkpmonth on (((tlkpmonth.monthno between 1 and 6) and 2006 =2006) or
((tlkpmonth.monthno between 7 and 12) and 2006=2007))
where tblBusOperators.iscurrent = true
and tblRoutecontracts.iscurrent = true
and not exists (select 1 from tblmsr
where tblMSR.monthno = tlkpmonth.monthno
and tblmsr.yearService = 2006
and tblMSR.[Route No] = tblRouteContracts.[Route No])
Can anybody help me understand why I get the error
"Syntax error in CONSTRAINT clause"?
I get it in Access 2003 and Access 2007.
Both are clean installs with no add-ins
Running this code in VBA, or pasting the SQL directly in a query results in the same error.
Sub test()
sTableName = "Test"
sSQL = "CREATE TABLE " & sTableName & "_Config (" _
& "[idConfig] Int Primary Key," _
& "[Config] Memo," _
& "[Instrument] int," _
& "[Serial_No] Text(25)," _
& "[Firmware] int," _
& "[Orientation] int," _
& "[Sensors] int," _
& "[Sensor_Size] float," _
& "[Sensor_1_Distance] float)"
DoCmd.RunSQL sSQL
sSQL = "CREATE TABLE " & sTableName & "_Leader (" _
& "[idLeader] Int Primary Key," _
& "[idGroup] int," _
& "[idFile] int," _
& "[idConfig] int," _
& "[DateTime] DateTime," _
& "[Heading] float, [Pitch] float, [Roll] float," _
& "[Pressure] float, [Depth_BSL] float, [Height_ASB] float,"
_
& "[Min_Valid_Sensor] int, [Max_Valid_Sensor] int," _
& "[ASM_Bed_Level] float," _
& "CONSTRAINT [FK_Test_Leader_idConfig] FOREIGN KEY ([idConfig]) REFERENCES [Test_Config] ([idConfig]) ON DELETE CASCADE ON UPDATE CASCADE" _
& ")"
DoCmd.RunSQL sSQL
End Sub
The first table is created just fine.
And if I leave the constraint clause out, the second table is created also.
If I try to run it as an SQL query right in Access, after the error is delivered, it highlights the word DELETE, and if I reverse the update and delete portions, it highlights the word UPDATE.
I have looked up the clause in Access help and even using their example, i get the same error.
Any help will surely be appreciated!
I am really stuck. I have spent two days searcinh different forums trying to solve my problem. I am trying to create an UPDATE q to my Access database. But I get either the: "Syntax error in query. Incomplete query clause" or "Syntax error in UPDATE query".
First of all here's the URL: www.innotec-as.no/login/Kunder
Login U/P either: "alfen" or "thomas".
The page opening up shows the user info, U/P and adress.
viewing the information is working perfectly - but editing it..no way.
When editing and submiting the data the above errors occour.
Try that and you'll also see the SQL I am trying to execute.
The CODE is as follows:
SQLtemp = "UPDATE 'Brukere' SET"
SQLtemp = SQLtemp & " 'navn' = '" & request("Navn") & "', "
SQLtemp = SQLtemp & " 'epst' = '" & request("Epst") & "', "
SQLtemp = SQLtemp & " 'Pass' = '" & request("Pass") & "', "
SQLtemp = SQLtemp & " 'Firma' = '" & request("Firma") & "', "
SQLtemp = SQLtemp & " 'BAdresse' = '" & request("BAdresse") & "', "
SQLtemp = SQLtemp & " 'BPostAdr' = '" & request("BPostAdr") & "', "
SQLtemp = SQLtemp & " 'PAdresse' = '" & request("PAdresse") & "', "
SQLtemp = SQLtemp & " 'PPostAdr' = '" & request("PPostAdr") & "', "
SQLtemp = SQLtemp & "WHERE 'Bnavn' = '" & request("Bnavn") & "'"
Response.Write(SQLtemp)
Response.End()
conn.Execute(SQLtemp)
rs.Update[/COLOR]
The finished SQL statement looks like this:
UPDATE 'Brukere' SET 'navn' = 'Alf Byman', 'epst' = 'alf@baccara.no', 'Pass' = 'alfen', 'Firma' = '', 'BAdresse' = '', 'BPostAdr' = '', 'PAdresse' = 'sdfg', 'PPostAdr' = '', WHERE 'Bnavn' = 'alfen'
I have tried to user single quotes, doubble quotes, brackets etc. nothing works.
The code I use for connection is as follows:
<!--#include file="../adovbs.inc"-->
<%
dim conn, rs, SQLtemp
' DSNless connection to Access Database
set conn = server.CreateObject ("ADODB.Connection")
rs="DRIVER={Microsoft Access Driver (*.mdb)}; "
rs=rs & "PWD=uralfjellet; DBQ=" & server.mappath("../../../../db/kunder.mdb")
conn.Open rs
I'll be very HAPPY for some expert help on this.
I have a combo box on a form where I allow the user to pick an office. The primary key is the bound column which I then want to use in a stored query to limit the query results to the specific office selected. I can easily do this with the docmd.runSQL in the module, but I'd like to use a stored query instead. My exact problem is I can't get the syntax correct in the Where clause in the query design. I use the build feature and get the following: [Forms]![frmReports]![cboOffice] which doesn't work. If I manually put the key value in the Where clause, it works fine. tell me the correct syntax for the Where clause.
View 4 Replies View RelatedConnecting Access FE to SQL SERVER BE Connection is fine. I can open and close it and other queries work fine. I have only one problem with the SQL in one query
Code:
With rstRPT
If FirstRecord = True Then
.Open "SELECT Min([" & SourceTbl & "].[3Order ID]) AS MinOf3OrderID " & _
[Code].....
why it wants to see the variable as a column name?
On my form I have 2 radio buttons rdoAll and rdoSpecific. If rdoAll is true then it prints a report. THis part works fine. However if rdoSpecific is true then I make visable combo box to look up an ID. Then when I click the button I want the same form to open but with just the info pertaining to the ID selected. Here is my code:
Private Sub cmdLotHistory_Click()
Dim stDocName As String, stSelection As String
stDocName = "rptLotHistory"
If Me.rdoAll = True Then
DoCmd.OpenReport "rptLotHistory", acViewPreview
End If
If Me.cboLotLU.Value > 0 Then
stSelection = "[LotID] =" & Me![cboLotLU]
End If
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
End Sub
When I choose the ID and click the button I get the message
Run-Time error '3075':
Syntax error (missing operator) in query expression '(LotID
=020806B1585)'.
the 020806B1585 is my ID number.
Debug hightlights the
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
but I'm guessing my real problem lies in the
stSelection = "[LotID] =" & Me![cboLotLU]
Can anyone point me in the right direction?
Thanks,
Rick
I have a function that builds a filter and it get a syntex error. It has three components and I must be missing something in combining them into the filter. SpecID and ReviewID are numbers. Selected is a checkbox and 'Yes' is a string. Can anyone see the source of the Syntax Error?
Private Function PlanFilter()
Dim strFilter1 As String, strFilter2 As String, strFilter3 As String
strFilter1 = "[SpecID] = " & [Forms]![frmMainEntry]![SpecID]
strFilter2 = "[ReviewID] = " & [Forms]![frmMainEntry].Form!fctlReviewRequests!ReviewID
strFilter3 = "[Selected] = 'Yes'"
gstrFilter = strFilter1 & " And " & strFilter2 & " And " & strFilter3 & ";"
Debug.Print gstrFilter
End Function
Thanks,
PC
I'm running a VBA query in excel trying to import the field from a table, simple so I thought, any idea on why i'm getting syntax error codes on this part?
Application.StatusBar = "Retrieving Depot Names"
sSQL = "SELECT tbldepot.DepotName 'Depot' " & vbCr & _
"FROM tbldepot, " & vbCr & _
"GROUP BY tbldepot.DepotName "
getSQLintoRange sSQL, Cells(1, iCol), True, True
iCol = iCol + 2
same thing on
'-= DFE =-
'Some manual DFEs have auth code but left at created
'AAP children have the DFE, not parent
Application.StatusBar = "Retrieving DFE Values"
sSQL = "SELECT tbldepot.DepotName 'Depot', " & vbCr & _
" SUM (di.Qty * di.Rate) 'DFEVal' " & vbCr & _
"FROM tblA537 a, tblA537DFE d, tblA537DFEItem di, tblDepot " & vbCr & _
"WHERE tblDepot.DepotID = a.DepotID " & vbCr & _
"AND a.OrderNumber = d.OrderNumber AND d.DFEID = di.DFEID " & vbCr & _
"AND NOT d.Authorisation IS NULL AND d.DFEStatus<>4 " & vbCr & _
"GROUP BY tblDepot.DepotName " & vbCr & _
"ORDER tblDepot.DepotName "
getSQLintoRange sSQL, Cells(1, iCol), True, True
iCol = iCol + 2
Hi All,
As I am really 'Green' in this line, can anyone tell me what wrong with my syntax?
Thanks in advance.
INSERT INTO Depreciation (AssetID,DepreciationAmount,DepreciationDate)
SELECT Assets.AssetID,
CASE WHEN Assets.AssetID FROM Assets not in (SELECT Depreciation.AssetID FROM Depreciation) THEN Month(Assets.DateAcquired)*SLN(Assets.BookValue,As sets.SalvageValue,Assets.DepreciableLife)/12
ELSE SLN(Assets.BookValue,Assets.SalvageValue,Assets.De preciableLife)/12
END,
Format(Me!DepnRunDT, "0")
FROM Status INNER JOIN Assets ON Status.StatusID=Assets.StatusID
WHERE ((Assets.StatusID)=1);
I am trying to create a query using the SQL view, i get a missing operator error while running this sql
SELECT tblPDInv_Temp.CustId, tblPDInv_Temp.CustName, tblPDInv_Temp.OnHold, tblPDInv_Temp.InvID, tblPDInv_Temp.InvAmt, " & _
"tblPDInv_Temp.AmtPaid, tblPDInv_Temp.DueDate, [InvAmt]-[AmtPaid] AS AmtDue, tblPDInv_Temp.InvStat " & _
"FROM tblPDInv_Temp " & _
"WHERE ((([InvAmt] - [AmtPaid]) <> 0) And ((Date() - [DueDate]) > 0)) " & _
"ORDER BY tblPDInv_Temp.CustName, tblPDInv_Temp.CustID, tblPDInv_Temp.InvID;"
Thanks
I use the following code in the After Update Event of the field Lastname to check for a possible duplicate record:
If DCount("*", "[tblPeople]", "[LastName]= '" & Me.Lastname & "' And [PODate] = #" & Me.PODate & "#") Then
......
And it works well.
In case an existing record is found, I want to jump to it.
I tried using the following code, but it gives a syntax error
Me.RecordsetClone.FindFirst "[Lastname] = '" & Me![LastName] & "' And [PODate] = #" & Me.PoDate & "#"
Me.Bookmark = Me.RecordsetClone.Bookmark
Can't figure out what is wrong here.
Any help will be appreciated.
can someone help me here? i'm trying to get a few selected employee from two tables, namely EmployeeParticulars and ProjectAllocation. EmployeeParticulars contained all the employees in the company whereas ProjectAllocation has two fields (PID - the project and EmpID - the employee who is allocated). One project consist of many employees.
Ok, let's move on to my problem now. I'm trying to get those employees who are not involved in a current project. i tried this
Code: Select Emp.Name from EmployeeParticulars Emp, ProjectAllocation Pro where Emp.EmpID <> Pro.EmpID
but it doesnt work. instead in returns me all the employees in the EmployeeParticulars table and on top of that, each employee appears 21 times!(this 21 i believe is from the 21 employees for this particular project) So, it actually runs 21*27(no of employees) = 546 times!
i was supposed to use != but i realise it doesnt not work in MS Access so i used this <> instead. however it does not give me what i want. Can someone assist me please.
I hope I've made my question comprehensive.
insert into date (ReqNum, date) values( 1 , '2005-03-20' )
I'm getting a syntax error with that. Does anyone know why?
Figured it out thanks.
View 1 Replies View Relatedwith my code I am having a syntax problem and I am new to asp so I am a little unsure of what needs to be changed.
Please help...
My error Message:
Code:Microsoft VBScript compilation error '800a03ea'Syntax error/addpicks2.asp, line 32values ('" & _username & "', '" & game1 & "', '" & game2 & "', '" & game3 & "', '" & game4 & "','" & game5 & "','" & game6 & "','" & game7 & "','" & game8 & "','" & game9 & "','" & game10 & "','" & game11 & "','" & game12 & "','" & game13 & "','" & game14 & "','" & game15 & "','" & game16 & "', #" & now() & "#)"--------^
My page code:
Code:<%' Declaring variablesDim username, game1, game2, game3, game4, game5, game6, game7, game8, game9, game10, game11, game12, game13, game14, game15, game16, data_source, con, sql_insert' A Function to check if some field entered by user is emptyFunction ChkString(string)If string = "" Then string = " "ChkString = Replace(string, "'", "''")End Function' Receiving values from Formusername = ChkString(Request.Form("username"))game1 = ChkString(Request.Form("game1"))game2 = ChkString(Request.Form("game2"))game3 = ChkString(Request.Form("game3"))game4 = ChkString(Request.Form("game4"))game5 = ChkString(Request.Form("game5"))game6 = ChkString(Request.Form("game6"))game7 = ChkString(Request.Form("game7"))game8 = ChkString(Request.Form("game8"))game9 = ChkString(Request.Form("game9"))game10 = ChkString(Request.Form("game10"))game11 = ChkString(Request.Form("game11"))game12 = ChkString(Request.Form("game12"))game13 = ChkString(Request.Form("game13"))game14 = ChkString(Request.Form("game14"))game15 = ChkString(Request.Form("game15"))game16 = ChkString(Request.Form("game16"))data_source = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & _ Server.MapPath("access_db/picks.mdb")sql_insert = "insert into week1 (username, game1, game2, game3, game4, game5, game6, game7, game8, game9, game10, game11, game12, game13, game14, game15, game16, entered_on)"values ('" & _username & "', '" & game1 & "', '" & game2 & "', '" & game3 & "', '" & game4 & "','" & game5 & "','" & game6 & "','" & game7 & "','" & game8 & "','" & game9 & "','" & game10 & "','" & game11 & "','" & game12 & "','" & game13 & "','" & game14 & "','" & game15 & "','" & game16 & "', #" & now() & "#)"' Creating Connection Object and opening the databaseSet con = Server.CreateObject("ADODB.Connection")con.Open data_sourcecon.Execute sql_insert' Done. Close the connectioncon.CloseSet con = NothingResponse.Redirect("showweek1.asp")%>
Any help is appreciated, Thanks!
-Anthony
Hello All,
I'm am writing an App in Java connecting to an MS Access database. I am now getting a syntax error on the following insert into statement:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
source = "jdbc:odbc:DKOperations";
connection = DriverManager.getConnection(source);
Statement stmt = connection.createStatement();
String CustInfoTable = "CUSTOMER_INFORMATION";
stmt.executeUpdate("INSERT INTO " + CustInfoTable + " CUSTOMER_FIRST_NAME VALUES " + CustFirstName);
This is the error:
An SQLException occurred: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
I cannot figure out what the syntax error is. Anyone have an insight on this for me? Most likely something easy that I am missing.
Thanks!
Hi All, I'am using the following code to update a table (tbl_CDT) on a NotInList event of a cboBox (CDT) I keep getting a SQL syntax error message, can anyone help resolve the code please
Private Sub CDT_NotInList(NewData As String, Response As Integer)
On Error GoTo CDT_NotInList_Err
Dim intAnswer As Integer
Dim strSQL As String
intAnswer = MsgBox("The CDT " & Chr(34) & NewData & _
Chr(34) & " is not currently listed." & vbCrLf & _
"Would you like to add to the list now?" _
, vbQuestion + vbYesNo, "DentureBase")
If intAnswer = vbYes Then
strSQL = "INSERT INTO tbl_CDT's([CDT_Name]) " & _
"VALUES ('" & NewData & "');"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True
MsgBox "The new CDT has been added to the list." _
, vbInformation, "DentureBase"
Response = acDataErrAdded
Else
MsgBox "Please choose a CDT from the list." _
, vbInformation, "DentureBase"
Response = acDataErrContinue
End If
CDT_NotInList_Exit:
Exit Sub
CDT_NotInList_Err:
MsgBox Err.Description, vbCritical, "Error"
Resume CDT_NotInList_Exit
End Sub
Thanks very much
Hi there!
My first post here, and I'm hoping some kind soul will be able to help me (as you can tell, I'm a kinda needy type!!) :o
I've got two completely separate databases, for both of which I need to be able to print a single form at a time. No problem there, a report and a bit of code solved that - but only for one of them! This is the successful one:
Private Sub cmdPrint_Click()
On Error GoTo Err_cmdPrint_Click
Dim stDocName As String
stDocName = "Issues"
DoCmd.OpenReport stDocName, acNormal, , "Issue_No = Forms![Concessions]!Issue_No"
Exit_cmdPrint_Click:
Exit Sub
Err_cmdPrint_Click:
MsgBox Err.Description
Resume Exit_cmdPrint_Click
End Sub
For my other database, I simply cut & paste the code, then changed the relevant document fields, as below:
Private Sub cmdPrint_Click()
On Error GoTo Err_cmdPrint_Click
Dim stDocName As String
stDocName = "Change Proposal Print"
DoCmd.OpenReport stDocName, acNormal, , "Issue No = Forms![Change Proposals]!Issue No"
Exit_cmdPrint_Click:
Exit Sub
Err_cmdPrint_Click:
MsgBox Err.Description
Resume Exit_cmdPrint_Click
End Sub
But when I try to run this, all I get every time is: "Syntax error (missing operator) in query expression '(Issue No = Forms![Change Proposals]!Issue No)'".
I can't for the life of me figure why one works but not the other. I've checked and treble-checked that I've got exactly the right document names. The report is "Change Proposal Print"
The form is "Change Proposals"
The form field criterion is "Issue No" (without an underscore in this one.)
What operator could possibly be missing in the second one, but not the first? Am I being very dense? Can anyone out there help? (Am I asking too many questions in a whiny voice?) :confused:
Cheers,
mike b :D
Hello,
I have a table called "ShrinkWrapBinding" where I am supposed to look up a "Price" from. As you see in the code below, I calculate a "totalPackages" number which comes from values in a form. My problem is that when I try to use this value (totalPackages) on the DLookUp function (as seen in this code) it gives me a syntax error exactly on the totalPackages variable. Please note that I added single quotes to the 'totalPackages' variable when I use it on the DLookUp function, and have tried every possible combination (single quotes, double quotes) but still doesn't work. What is it that I'm doing wrong?
Code:
Dim totalPackages As Integer
Dim tempPrice As Double
totalPackages = Me.QuantityBooks1 / Me.ShrinkWrapQty
tempPrice = DLookup("[ShrinkWrapBinding]! [Price]", "ShrinkWrapBinding", "'totalPackages' >= [ShrinkWrapBinding]![RangeField]")
Thank you
Hi
This may be a very silly question but I have the following code which is meant to take data from textboxes, checkboxes etc and insert it into a new record on a table using the INSERT INTO statment. However I am getting a Syntax error in my INSERT INTO statement which i cannot figure out.
Please Help!!?
Private Sub cmdSaveRecord_Click()
Dim SQL As String
Dim Today As String
Dim Ref As String
Dim HK As String
Dim Site As String
Dim Equip As String
Dim Serial As String
Dim Invoice As String
Dim Client As String
Dim HKRef As String
Dim Tested As String
Dim Completed As String
Dim chkHKr As String
Dim Repaired As String
Dim Spares As String
Dim CompDate As String
Dim Exp As String
Today = txtDate
Ref = txtRef
HK = txtHK
Site = txtSite
Equip = txtEquipment
Serial = txtSerial
Invoice = txtInvoice
If cboClient.Column(0) <> Null Then Client = cboClient.Column(0) Else Client = ""
HKRef = txtHKRef
Tested = chkTested.Value
Completed = chkCompleted.Value
chkHKr = chkHK.Value
Repaired = chkRepaired.Value
Spares = chkSpares.Value
CompDate = cldComp.Value
Exp = cldExp.Value
SQL = "INSERT INTO ServiceReport (Date, CallReferenceNo, HongKongFaultNo, Client, Site, Equipment, SerialNo, Tested, Repaired, Spares, HK, ExpectedDate, Completed, InvoiceNo, CompletedDate VALUES (Today, Ref, HK, Site, Equip, Serial, Invoice, Client, HKRef, Tested, Completed, chkHKr, Repaired, Spares, CompDate, Exp)"
DoCmd.RunSQL SQL
Hi,
I need help with the following question.
I got the following error when loading up a form:
IIf(Not IsNull([SubJobName]) Or [SubJobName]<>"",[SubJobName],[JobName]) AS Expr1, [SubJobs].Status
Can you have IIF statement in the query expression? because it said "Syntax
error in string in the above query expression".
The full codes i have in the form load is
Private Sub Form_Load()
strSQL = "SELECT [Jobs].JobID, [SubJobs].IndustryNo, [SubJobs].ClientNo, [SubJobs].JobNo, [SubJobs].SubJobNo, IIf(Not IsNull([SubJobName]) Or [SubJobName]<>"",[SubJobName],[JobName]) AS Expr1, [SubJobs].Status"
strSQL = strSQL & " FROM [SubJobs] INNER JOIN [Jobs] ON ([SubJobs].JobNo = [Jobs].JobNo) AND ([SubJobs].ClientNo = [Jobs].ClientNo) AND ([SubJobs].IndustryNo = [Jobs].IndustryNo)"
strSQL = strSQL & " WHERE ((([SubJobs].Status) = -1))"
Me!ListBox_Jobs.RowSource = strSQL
End Sub
Thank you in advance
ok, i had created a form and wanted to add a couple new fields. so i did so in the related table and then continued to create a new form with all the fields i already had plus the new ones. (by the way half of the fields are from one table and half from another). The first time i created it through the form wizard it worked. however, i had forgotten a few fields, (fields with address and phone # information). so i deleted it and went back through the wizard and included all the fields i needed but this time after i completed the wizard an access window box popped up and said "The wizard is unable to open your form in Form view or Datasheet view, possibly because another user has a source table open in exclusive mode. Your form will be opened in design view." But the thing is i do have other users but no one even had the database open and i didn't have any other windows for access open. so then when i tried to open it in Form view i got this message "Syntax error in FROM claus". Can someone please tell me what that means and possibly what is wrong? :( :confused: :(
View 1 Replies View Related