Syntax Error When Running From Module
Mar 26, 2006
I get a syntax error when I run this query from an Access Module but I don't get an error when I run it as a straight query. Can anyone see what's wrong with it? I am using Access 2003
Dim sqlStmt As String
sqlStmt = "SELECT [CCC Companies].ESTBLMT_NO, SUM(subWeight) AS weight "
sqlStmt = sqlStmt + "FROM [CCC Companies], [SELECT ESTBLMT_NO, COUNT(*) * 10 AS subWeight "
sqlStmt = sqlStmt + "FROM CCCWords "
sqlStmt = sqlStmt + "WHERE Word IN ( Select word from CBCWords where vendor = '"
sqlStmt = sqlStmt + strVendor
sqlStmt = sqlStmt + "') GROUP BY ESTBLMT_NO "
sqlStmt = sqlStmt + "UNION "
sqlStmt = sqlStmt + "SELECT ESTBLMT_NO,COUNT(*) * 25 AS subWeight "
sqlStmt = sqlStmt + "FROM CCCCleansedPhone "
sqlStmt = sqlStmt + "WHERE MID(STRIPPED_PHONE,1, 5) IN ( Select MID(STRIPPED_PHONE,1 ,5) FROM CBCCleansedPhone WHERE vendor_no = '"
sqlStmt = sqlStmt + strVendor
sqlStmt = sqlStmt + "') GROUP BY ESTBLMT_NO "
sqlStmt = sqlStmt + "UNION "
sqlStmt = sqlStmt + "SELECT ESTBLMT_NO, COUNT(*) * 50 AS subWeight "
sqlStmt = sqlStmt + "FROM CCCCleansedPhone "
sqlStmt = sqlStmt + "WHERE MID(STRIPPED_PHONE,1, 7) IN ( Select MID(STRIPPED_PHONE,1 ,7) FROM CBCCleansedPhone WHERE vendor_no = '"
sqlStmt = sqlStmt + strVendor
sqlStmt = sqlStmt + "') GROUP BY ESTBLMT_NO "
sqlStmt = sqlStmt + "UNION "
sqlStmt = sqlStmt + "SELECT ESTBLMT_NO, COUNT(*) * 50 AS subWeight "
sqlStmt = sqlStmt + "FROM CCCCleansedPostalCode "
sqlStmt = sqlStmt + "WHERE MID(STRIPPED_POSTAL,1, 6) IN ( Select MID(STRIPPED_POSTAL,1 ,6) FROM CBCCleansedPostalCode WHERE vendor_no = '"
sqlStmt = sqlStmt + strVendor
sqlStmt = sqlStmt + "') GROUP BY ESTBLMT_NO "
sqlStmt = sqlStmt + "]. AS dupWeight "
sqlStmt = sqlStmt + "WHERE dupWeight.ESTBLMT_NO = [CCC Companies].ESTBLMT_NO "
sqlStmt = sqlStmt + "GROUP BY [CCC Companies].ESTBLMT_NO "
sqlStmt = sqlStmt + "HAVING SUM(subWeight) >= 60 "
sqlStmt = sqlStmt + "ORDER BY SUM(subWeight) DESC"
DoCmd.OpenForm "Show Probabilities", , , sqlStmt
Here is the code that runs ok in a straight query:
SELECT [CCC Companies].ESTBLMT_NO, SUM(subWeight) AS weight
FROM [CCC Companies], [SELECT ESTBLMT_NO, COUNT(*) * 10 AS subWeight
FROM CCCWords
WHERE Word IN ( Select word from CBCWords where vendor = '100024')
GROUP BY ESTBLMT_NO
UNION
SELECT ESTBLMT_NO, COUNT(*) * 25 AS subWeight
FROM CCCCleansedPhone
WHERE MID(STRIPPED_PHONE,1, 5) IN ( Select MID(STRIPPED_PHONE,1 ,5) FROM CBCCleansedPhone WHERE vendor_no = '100024')
GROUP BY ESTBLMT_NO
UNION
SELECT ESTBLMT_NO, COUNT(*) * 50 AS subWeight
FROM CCCCleansedPhone
WHERE MID(STRIPPED_PHONE,1, 7) IN ( Select MID(STRIPPED_PHONE,1 ,7) FROM CBCCleansedPhone WHERE vendor_no = '100024')
GROUP BY ESTBLMT_NO
UNION
SELECT ESTBLMT_NO, COUNT(*) * 50 AS subWeight
FROM CCCCleansedPostalCode
WHERE MID(STRIPPED_POSTAL,1, 6) IN ( Select MID(STRIPPED_POSTAL,1 ,6) FROM CBCCleansedPostalCode WHERE vendor_no = '100024')
GROUP BY ESTBLMT_NO
]. AS dupWeight
WHERE dupWeight.ESTBLMT_NO=[CCC Companies].ESTBLMT_NO
GROUP BY [CCC Companies].ESTBLMT_NO
HAVING SUM(subWeight)>=60
ORDER BY SUM(subWeight) DESC;
View Replies
ADVERTISEMENT
Sep 14, 2005
Any idea how to retrieve the name of the Module and the name of the Sub/Function that currently executing?
Show me the door... :-)
View 2 Replies
View Related
Nov 15, 2006
hey there,
i have a macro that has 2 actions:
set warnings to warning on: NO
and
runCode to Function Name: cmdImport_Click()
where cmdImport_Click() is a Private Sub in a module within the same database.
when i try to run the macro i get an error that stated
"the expression you entered has a function name that MS Access can't find."
but if i open the module called ImportMSExcelFile and set my cursor on the Private Sub cmdImport_Click() and select the green arrow to run the procedure it runs fine.
any suggetions?
tuktuk
View 2 Replies
View Related
Oct 1, 2004
I am creating an form in a database and whenever one of my procedure's run it creates this error message:
The expression ON Load you entered as the event property setting produced the following error:
Member already exists in an object module from which this object module derives.
*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure].
*There may have been an error evaluating the function, event, or macro.
An ideas?
View 7 Replies
View Related
Aug 19, 2005
I have the following sql that returns my sample records:
SELECT QryAllEnrolments.[Person Id], QryAllEnrolments.[Course Code], QryAllEnrolments.[Course Name], QryAllEnrolments.GLH, QryAllEnrolments.Date
FROM QryAllEnrolments LEFT JOIN QryWithdrawls ON (QryAllEnrolments.[Person Id] = QryWithdrawls.[Person Id]) AND (QryAllEnrolments.[Course Code] = QryWithdrawls.[Course Code])
WHERE (((QryAllEnrolments.[Person Id])=1950165) AND ((QryWithdrawls.[Person Id]) Is Null));
and wrote the following hoping it would return a running sum of the guided learning hours (GLH) utilising the above:
SELECT Pro.[Date], Pro.[Person Id], Pro.[Course Code], Pro.[Course Name], Pro.[GLH],
(Select Sum(Pro1.[GLH] FROM [QryAllEnrolments Without Matching QryWithdrawls] Pro1 WHERE Pro1.[Date]<=Pro.[Date]) AS [Running Total], Pro.[Date]
FROM [QryAllEnrolments Without Matching QryWithdrawls] AS Pro
ORDER BY Pro.[Date]
It squeels of a syntax error at the inner select sum clause.
your assistance to finish this off would be greatly appreciated.
regards
Peter
View 8 Replies
View Related
Aug 29, 2005
I was doing a compact and repair when I got this error message.
Now when I try to open my database all I get is this message:
"Module not found"
:eek:
Am I screwed or is there maybe possible silver bullet??
Thanks for any help
View 1 Replies
View Related
Jan 30, 2014
I am trying to pass a boolean variable to a class module
Code:
Set rps.ViewS = View
the code in the module that this in theory is calling reads as
Code:
Private ViewC As Boolean
Public Property Set ViewS(ByRef ViewA As Boolean)
Set ViewC = ViewA
End Property
Public Property Get ViewS() As Boolean
Set ViewS = ViewC
End Property
However I am getting the error message
Quote:Definitions of property procedures for the same property are inconsistent, or property procedure has an optional parameter, a ParamArray, or an invalid Set final parameter.
View 6 Replies
View Related
Dec 14, 2007
I'm wondering how other members here make decisions whether they want to place codes behind form or use a standard module instead.
I understand there is a performance penalty when you add another module (and use it), but am not sure whether one big fat module would be faster than several smaller modules with identical coding.
Furthermore, I know that some members use a hidden form to deal with startup and shutdown processing. Sometimes the processing has nothing to do with forms and would make more sense in a standard module, but since the form is already loaded, does it makes more sense to use the module behind the form than calling a function in a separate standard module to execute the needed code?
So, what do you tend to do in such situation?
View 14 Replies
View Related
Mar 2, 2007
On my form I have 2 radio buttons rdoAll and rdoSpecific. If rdoAll is true then it prints a report. THis part works fine. However if rdoSpecific is true then I make visable combo box to look up an ID. Then when I click the button I want the same form to open but with just the info pertaining to the ID selected. Here is my code:
Private Sub cmdLotHistory_Click()
Dim stDocName As String, stSelection As String
stDocName = "rptLotHistory"
If Me.rdoAll = True Then
DoCmd.OpenReport "rptLotHistory", acViewPreview
End If
If Me.cboLotLU.Value > 0 Then
stSelection = "[LotID] =" & Me![cboLotLU]
End If
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
End Sub
When I choose the ID and click the button I get the message
Run-Time error '3075':
Syntax error (missing operator) in query expression '(LotID
=020806B1585)'.
the 020806B1585 is my ID number.
Debug hightlights the
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
but I'm guessing my real problem lies in the
stSelection = "[LotID] =" & Me![cboLotLU]
Can anyone point me in the right direction?
Thanks,
Rick
View 2 Replies
View Related
Sep 12, 2005
I have a function that builds a filter and it get a syntex error. It has three components and I must be missing something in combining them into the filter. SpecID and ReviewID are numbers. Selected is a checkbox and 'Yes' is a string. Can anyone see the source of the Syntax Error?
Private Function PlanFilter()
Dim strFilter1 As String, strFilter2 As String, strFilter3 As String
strFilter1 = "[SpecID] = " & [Forms]![frmMainEntry]![SpecID]
strFilter2 = "[ReviewID] = " & [Forms]![frmMainEntry].Form!fctlReviewRequests!ReviewID
strFilter3 = "[Selected] = 'Yes'"
gstrFilter = strFilter1 & " And " & strFilter2 & " And " & strFilter3 & ";"
Debug.Print gstrFilter
End Function
Thanks,
PC
View 3 Replies
View Related
Jun 20, 2007
I'm running a VBA query in excel trying to import the field from a table, simple so I thought, any idea on why i'm getting syntax error codes on this part?
Application.StatusBar = "Retrieving Depot Names"
sSQL = "SELECT tbldepot.DepotName 'Depot' " & vbCr & _
"FROM tbldepot, " & vbCr & _
"GROUP BY tbldepot.DepotName "
getSQLintoRange sSQL, Cells(1, iCol), True, True
iCol = iCol + 2
same thing on
'-= DFE =-
'Some manual DFEs have auth code but left at created
'AAP children have the DFE, not parent
Application.StatusBar = "Retrieving DFE Values"
sSQL = "SELECT tbldepot.DepotName 'Depot', " & vbCr & _
" SUM (di.Qty * di.Rate) 'DFEVal' " & vbCr & _
"FROM tblA537 a, tblA537DFE d, tblA537DFEItem di, tblDepot " & vbCr & _
"WHERE tblDepot.DepotID = a.DepotID " & vbCr & _
"AND a.OrderNumber = d.OrderNumber AND d.DFEID = di.DFEID " & vbCr & _
"AND NOT d.Authorisation IS NULL AND d.DFEStatus<>4 " & vbCr & _
"GROUP BY tblDepot.DepotName " & vbCr & _
"ORDER tblDepot.DepotName "
getSQLintoRange sSQL, Cells(1, iCol), True, True
iCol = iCol + 2
View 5 Replies
View Related
Jun 26, 2007
Hi All,
As I am really 'Green' in this line, can anyone tell me what wrong with my syntax?
Thanks in advance.
INSERT INTO Depreciation (AssetID,DepreciationAmount,DepreciationDate)
SELECT Assets.AssetID,
CASE WHEN Assets.AssetID FROM Assets not in (SELECT Depreciation.AssetID FROM Depreciation) THEN Month(Assets.DateAcquired)*SLN(Assets.BookValue,As sets.SalvageValue,Assets.DepreciableLife)/12
ELSE SLN(Assets.BookValue,Assets.SalvageValue,Assets.De preciableLife)/12
END,
Format(Me!DepnRunDT, "0")
FROM Status INNER JOIN Assets ON Status.StatusID=Assets.StatusID
WHERE ((Assets.StatusID)=1);
View 1 Replies
View Related
Sep 20, 2007
I am trying to create a query using the SQL view, i get a missing operator error while running this sql
SELECT tblPDInv_Temp.CustId, tblPDInv_Temp.CustName, tblPDInv_Temp.OnHold, tblPDInv_Temp.InvID, tblPDInv_Temp.InvAmt, " & _
"tblPDInv_Temp.AmtPaid, tblPDInv_Temp.DueDate, [InvAmt]-[AmtPaid] AS AmtDue, tblPDInv_Temp.InvStat " & _
"FROM tblPDInv_Temp " & _
"WHERE ((([InvAmt] - [AmtPaid]) <> 0) And ((Date() - [DueDate]) > 0)) " & _
"ORDER BY tblPDInv_Temp.CustName, tblPDInv_Temp.CustID, tblPDInv_Temp.InvID;"
Thanks
View 2 Replies
View Related
May 5, 2005
I use the following code in the After Update Event of the field Lastname to check for a possible duplicate record:
If DCount("*", "[tblPeople]", "[LastName]= '" & Me.Lastname & "' And [PODate] = #" & Me.PODate & "#") Then
......
And it works well.
In case an existing record is found, I want to jump to it.
I tried using the following code, but it gives a syntax error
Me.RecordsetClone.FindFirst "[Lastname] = '" & Me![LastName] & "' And [PODate] = #" & Me.PoDate & "#"
Me.Bookmark = Me.RecordsetClone.Bookmark
Can't figure out what is wrong here.
Any help will be appreciated.
View 4 Replies
View Related
Mar 9, 2005
can someone help me here? i'm trying to get a few selected employee from two tables, namely EmployeeParticulars and ProjectAllocation. EmployeeParticulars contained all the employees in the company whereas ProjectAllocation has two fields (PID - the project and EmpID - the employee who is allocated). One project consist of many employees.
Ok, let's move on to my problem now. I'm trying to get those employees who are not involved in a current project. i tried this
Code: Select Emp.Name from EmployeeParticulars Emp, ProjectAllocation Pro where Emp.EmpID <> Pro.EmpID
but it doesnt work. instead in returns me all the employees in the EmployeeParticulars table and on top of that, each employee appears 21 times!(this 21 i believe is from the 21 employees for this particular project) So, it actually runs 21*27(no of employees) = 546 times!
i was supposed to use != but i realise it doesnt not work in MS Access so i used this <> instead. however it does not give me what i want. Can someone assist me please.
I hope I've made my question comprehensive.
View 3 Replies
View Related
Mar 19, 2005
insert into date (ReqNum, date) values( 1 , '2005-03-20' )
I'm getting a syntax error with that. Does anyone know why?
View 1 Replies
View Related
Jul 6, 2005
Figured it out thanks.
View 1 Replies
View Related
Aug 8, 2006
with my code I am having a syntax problem and I am new to asp so I am a little unsure of what needs to be changed.
Please help...
My error Message:
Code:Microsoft VBScript compilation error '800a03ea'Syntax error/addpicks2.asp, line 32values ('" & _username & "', '" & game1 & "', '" & game2 & "', '" & game3 & "', '" & game4 & "','" & game5 & "','" & game6 & "','" & game7 & "','" & game8 & "','" & game9 & "','" & game10 & "','" & game11 & "','" & game12 & "','" & game13 & "','" & game14 & "','" & game15 & "','" & game16 & "', #" & now() & "#)"--------^
My page code:
Code:<%' Declaring variablesDim username, game1, game2, game3, game4, game5, game6, game7, game8, game9, game10, game11, game12, game13, game14, game15, game16, data_source, con, sql_insert' A Function to check if some field entered by user is emptyFunction ChkString(string)If string = "" Then string = " "ChkString = Replace(string, "'", "''")End Function' Receiving values from Formusername = ChkString(Request.Form("username"))game1 = ChkString(Request.Form("game1"))game2 = ChkString(Request.Form("game2"))game3 = ChkString(Request.Form("game3"))game4 = ChkString(Request.Form("game4"))game5 = ChkString(Request.Form("game5"))game6 = ChkString(Request.Form("game6"))game7 = ChkString(Request.Form("game7"))game8 = ChkString(Request.Form("game8"))game9 = ChkString(Request.Form("game9"))game10 = ChkString(Request.Form("game10"))game11 = ChkString(Request.Form("game11"))game12 = ChkString(Request.Form("game12"))game13 = ChkString(Request.Form("game13"))game14 = ChkString(Request.Form("game14"))game15 = ChkString(Request.Form("game15"))game16 = ChkString(Request.Form("game16"))data_source = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & _ Server.MapPath("access_db/picks.mdb")sql_insert = "insert into week1 (username, game1, game2, game3, game4, game5, game6, game7, game8, game9, game10, game11, game12, game13, game14, game15, game16, entered_on)"values ('" & _username & "', '" & game1 & "', '" & game2 & "', '" & game3 & "', '" & game4 & "','" & game5 & "','" & game6 & "','" & game7 & "','" & game8 & "','" & game9 & "','" & game10 & "','" & game11 & "','" & game12 & "','" & game13 & "','" & game14 & "','" & game15 & "','" & game16 & "', #" & now() & "#)"' Creating Connection Object and opening the databaseSet con = Server.CreateObject("ADODB.Connection")con.Open data_sourcecon.Execute sql_insert' Done. Close the connectioncon.CloseSet con = NothingResponse.Redirect("showweek1.asp")%>
Any help is appreciated, Thanks!
-Anthony
View 2 Replies
View Related
Oct 30, 2005
Hello All,
I'm am writing an App in Java connecting to an MS Access database. I am now getting a syntax error on the following insert into statement:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
source = "jdbc:odbc:DKOperations";
connection = DriverManager.getConnection(source);
Statement stmt = connection.createStatement();
String CustInfoTable = "CUSTOMER_INFORMATION";
stmt.executeUpdate("INSERT INTO " + CustInfoTable + " CUSTOMER_FIRST_NAME VALUES " + CustFirstName);
This is the error:
An SQLException occurred: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
I cannot figure out what the syntax error is. Anyone have an insight on this for me? Most likely something easy that I am missing.
Thanks!
View 1 Replies
View Related
May 13, 2007
Hi All, I'am using the following code to update a table (tbl_CDT) on a NotInList event of a cboBox (CDT) I keep getting a SQL syntax error message, can anyone help resolve the code please
Private Sub CDT_NotInList(NewData As String, Response As Integer)
On Error GoTo CDT_NotInList_Err
Dim intAnswer As Integer
Dim strSQL As String
intAnswer = MsgBox("The CDT " & Chr(34) & NewData & _
Chr(34) & " is not currently listed." & vbCrLf & _
"Would you like to add to the list now?" _
, vbQuestion + vbYesNo, "DentureBase")
If intAnswer = vbYes Then
strSQL = "INSERT INTO tbl_CDT's([CDT_Name]) " & _
"VALUES ('" & NewData & "');"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True
MsgBox "The new CDT has been added to the list." _
, vbInformation, "DentureBase"
Response = acDataErrAdded
Else
MsgBox "Please choose a CDT from the list." _
, vbInformation, "DentureBase"
Response = acDataErrContinue
End If
CDT_NotInList_Exit:
Exit Sub
CDT_NotInList_Err:
MsgBox Err.Description, vbCritical, "Error"
Resume CDT_NotInList_Exit
End Sub
Thanks very much
View 9 Replies
View Related
Jun 27, 2007
Hi there!
My first post here, and I'm hoping some kind soul will be able to help me (as you can tell, I'm a kinda needy type!!) :o
I've got two completely separate databases, for both of which I need to be able to print a single form at a time. No problem there, a report and a bit of code solved that - but only for one of them! This is the successful one:
Private Sub cmdPrint_Click()
On Error GoTo Err_cmdPrint_Click
Dim stDocName As String
stDocName = "Issues"
DoCmd.OpenReport stDocName, acNormal, , "Issue_No = Forms![Concessions]!Issue_No"
Exit_cmdPrint_Click:
Exit Sub
Err_cmdPrint_Click:
MsgBox Err.Description
Resume Exit_cmdPrint_Click
End Sub
For my other database, I simply cut & paste the code, then changed the relevant document fields, as below:
Private Sub cmdPrint_Click()
On Error GoTo Err_cmdPrint_Click
Dim stDocName As String
stDocName = "Change Proposal Print"
DoCmd.OpenReport stDocName, acNormal, , "Issue No = Forms![Change Proposals]!Issue No"
Exit_cmdPrint_Click:
Exit Sub
Err_cmdPrint_Click:
MsgBox Err.Description
Resume Exit_cmdPrint_Click
End Sub
But when I try to run this, all I get every time is: "Syntax error (missing operator) in query expression '(Issue No = Forms![Change Proposals]!Issue No)'".
I can't for the life of me figure why one works but not the other. I've checked and treble-checked that I've got exactly the right document names. The report is "Change Proposal Print"
The form is "Change Proposals"
The form field criterion is "Issue No" (without an underscore in this one.)
What operator could possibly be missing in the second one, but not the first? Am I being very dense? Can anyone out there help? (Am I asking too many questions in a whiny voice?) :confused:
Cheers,
mike b :D
View 4 Replies
View Related
Nov 28, 2007
When I'm runnig the query, I'm getting an error "syntax error in from clause".
I can't enter to "design" mode to find the error.
View 2 Replies
View Related
Mar 26, 2008
Hello,
I have a table called "ShrinkWrapBinding" where I am supposed to look up a "Price" from. As you see in the code below, I calculate a "totalPackages" number which comes from values in a form. My problem is that when I try to use this value (totalPackages) on the DLookUp function (as seen in this code) it gives me a syntax error exactly on the totalPackages variable. Please note that I added single quotes to the 'totalPackages' variable when I use it on the DLookUp function, and have tried every possible combination (single quotes, double quotes) but still doesn't work. What is it that I'm doing wrong?
Code:
Dim totalPackages As Integer
Dim tempPrice As Double
totalPackages = Me.QuantityBooks1 / Me.ShrinkWrapQty
tempPrice = DLookup("[ShrinkWrapBinding]! [Price]", "ShrinkWrapBinding", "'totalPackages' >= [ShrinkWrapBinding]![RangeField]")
Thank you
View 8 Replies
View Related
Apr 2, 2008
Hi
This may be a very silly question but I have the following code which is meant to take data from textboxes, checkboxes etc and insert it into a new record on a table using the INSERT INTO statment. However I am getting a Syntax error in my INSERT INTO statement which i cannot figure out.
Please Help!!?
Private Sub cmdSaveRecord_Click()
Dim SQL As String
Dim Today As String
Dim Ref As String
Dim HK As String
Dim Site As String
Dim Equip As String
Dim Serial As String
Dim Invoice As String
Dim Client As String
Dim HKRef As String
Dim Tested As String
Dim Completed As String
Dim chkHKr As String
Dim Repaired As String
Dim Spares As String
Dim CompDate As String
Dim Exp As String
Today = txtDate
Ref = txtRef
HK = txtHK
Site = txtSite
Equip = txtEquipment
Serial = txtSerial
Invoice = txtInvoice
If cboClient.Column(0) <> Null Then Client = cboClient.Column(0) Else Client = ""
HKRef = txtHKRef
Tested = chkTested.Value
Completed = chkCompleted.Value
chkHKr = chkHK.Value
Repaired = chkRepaired.Value
Spares = chkSpares.Value
CompDate = cldComp.Value
Exp = cldExp.Value
SQL = "INSERT INTO ServiceReport (Date, CallReferenceNo, HongKongFaultNo, Client, Site, Equipment, SerialNo, Tested, Repaired, Spares, HK, ExpectedDate, Completed, InvoiceNo, CompletedDate VALUES (Today, Ref, HK, Site, Equip, Serial, Invoice, Client, HKRef, Tested, Completed, chkHKr, Repaired, Spares, CompDate, Exp)"
DoCmd.RunSQL SQL
View 5 Replies
View Related
Apr 11, 2006
Would someone please tell me why I'm getting this error with this query?
select distinct
case_id
from closed cases g
where
sys_curr_date between #01/01/2005# and #12/31/2005#
and aft_case_status = 'O'
and not exists
( select 1 from closed cases X
where X.case_id = g.case_id
and X.aft_case_status = 'C'
and X.sys_curr_date = g.sys_curr_date )
Thanks
View 1 Replies
View Related
Jun 15, 2007
Hello,
Found this here and was trying to do the following. Delete rows in my table that are dupicates and put them into a new table.
Keep getting a syntax error.
SELECT DISTINCT * FROM tblRaw INTO tblClientcontacts
Anyone know why?
I have a table that has 12,000 rows. Out of those rows are 1600 uniques. I need to delete all the duplicates. Is this a way to do it?
Thanks.
View 1 Replies
View Related
