Hi all, instead of doing a dlookup via a query, i'd like to do a dlookup for price direct in a table where the criteria is the value in Text1 from Form1
outt = Nz(DLookup("[Price]", "Table1")) Where Product = ' Text1' from Form1
Whats the correct syntax for this please? Thanks
I need to use a dlookup on a report to look up fields on another query, other than what the report uses.
How do i use the dlookup syntax?
I have a field on another query called "Average" and the query name is AverageResults. The report is called Totals.
Hello,
I have a table called "ShrinkWrapBinding" where I am supposed to look up a "Price" from. As you see in the code below, I calculate a "totalPackages" number which comes from values in a form. My problem is that when I try to use this value (totalPackages) on the DLookUp function (as seen in this code) it gives me a syntax error exactly on the totalPackages variable. Please note that I added single quotes to the 'totalPackages' variable when I use it on the DLookUp function, and have tried every possible combination (single quotes, double quotes) but still doesn't work. What is it that I'm doing wrong?
Code:
Dim totalPackages As Integer
Dim tempPrice As Double
totalPackages = Me.QuantityBooks1 / Me.ShrinkWrapQty
tempPrice = DLookup("[ShrinkWrapBinding]! [Price]", "ShrinkWrapBinding", "'totalPackages' >= [ShrinkWrapBinding]![RangeField]")
Thank you
I am trying to implement DLookup for the following sql to a linked SQL Server table to verify that the currentuser is in my Traders table:
select tr_username from Traders where tr_username='edobbie'
When I enter the following DLookup command I get the error 'compile error expected ='
The offending line is:
DLookup("tr_username","Traders","[tr_username] = " &CurrentUser())
The Editor doesn't seem to see the = sign in my criteria. I've modified the syntax a number of ways to no avail.
Does anyone see the problem?
I am looking to use a "If" statement with DLookup to find a record and see if the field name begins with "TW" as the characters. Here is what I have so far:
Code:
Dim matchCriteria As String
matchCriteria = "LIKE 'TW*'"
If DLookup("end_user", "tbl_module_repairs", "prikey = " & Me.txt_rid1.Value) = matchCriteria Then
MsgBox "Success"
Else
MsgBox "FAILURE"
End If
I am trying to switch between two sets of pricing for customers that begin with "TW" and then all else. Would the use of a "case" statement be better? If so I do not have the "end_user" bound to the form so I would need to embed Dlookup in the "case" method.
I wonder if you can help me. In my query, for this calculated field, i get an error message about a syntax error missing operator in query expression.
what did i do wrong? thanks
FormulaID is a text field.
UnitRM Combined: nz(DLookUp("UnitRM Combined","QryFormulaSummed","[QryFormulaSummed].[FormulaID]='" & tblCostJunction.FormulaID & "'"))
I have a report that when run, prompts a user for an id. The user enters and id and it pulls the information based on that id. The information is being pulled from data stored in Table A. I also have Table B that associates an id with a name. In my report I have the input being stored as a string, called strCampusId. I have a text box with called txtCampusMinistryName. I want the report to do a lookup based on the users input and display the CampusId Name, however I am getting an error. The error says, RunTime Error 3075, Syntax error (missing operator) in query expression 'ParishId=*0101'.
Table B (called CampusMinistry) only has 2 columns, ParishId and ParishName
Here is my code that I am trying to use.
txtCampusMinistryName = DLookup("ParishName", "CampusMinistry", "ParishId=" & strCampusId)
Thanks for any and all help.
If I type 2014 instead of b everything works out.
Code:
Dim a As Double
Dim b As String
b = Right(RepMonth, 4)
a = DLookup("[EUR/TRY]", "Plan_FX_RATES", "YEAR = '" & b & "'")
Debug.Print a
Debug.Print b
Debug.Print RepMonth
Me.txtversion = "Ver:" & " " & DLookup("[txtVersionMajor] & " - " & [txtVersionMinor] & " - " & [txtVersionRevision]", "tblVersionInfo")
What's wrong with my syntax ? It's the "-" part that is the problem.
I have table [table1] which have 4 fields
EMPID - primary key
EMPFirstname
EMPLastname
EMPDOB
Input box as txtempid as string
I am trying to learn how I to display other field based on one field in my case last three field based on EMPID
I am actually getting syntax error when I dry to display DATE Field
Following are my attempts
Dim Verfirstname as string
Dim Verlastname as string
Dim VerDOB as date
Verfirstname = dlookup("[EMPfirstname]","table1","[EMPID]='" & me.txtempid & "'")
Msgbox Verfirstname
works fine. But when I use for Date, I am getting syntax error
VerDOB = dlookup("[EMPDOB]","table1","[EMPID]='" & me.txtempid & "'")
Msgbox VerDOB ---- now I am getting syntax error
I tried to understand over net and I believe i need to used with "#" before and after the date field but my criteria...
I am trying to create a Dlookup in Access 2010 within a query using query wizard. I want to lookup the tax rate for an employee based on a salary range and their 'tax category' (string). Through troubleshooting I can get the criteria to work separately.
These are: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'")
DLookUp("Base","TABWT",[grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
These work and return the correct values for each column/row when I run the query.
However, when I combine the criteria (using the build wizard) as follows:
Expr1: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'" and [grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
The Dlookup will returns 0 values but will not give an error message.
I've tried quite a few variations on syntax and quotes and so on. However, it's just not working for me.
I have 3 table table; Invoice table, Product table and Sale_product table. Sale product table records all sale from the product table
Invoice table has these fields
ID
TOTAL
CASH_TENDERED
CHANGE
Product table has
ID
CODE
QUANTITY
NAME
PRICE
and Sale_Product table has these
ID
PRODUCT_CODE
QUANTITY
PRODUCT_NAME
PRICE
SUBTOTAL
INVOICE
I did main form from Invoice table and sub form from Sale_product table. I want to use DLOOKUP function to load the name and price, quantity and calculate subtotal automatically from the product table based on the product code entered. i have being trying hard and i keep on getting "Name? error"
I'm having difficulties creating a sql statement which updates data in another Access database from a current database.
I'm able to do an insert and delete statement just perfectly, but not an Update. :confused:
For example, here is a dummy sample (which does not work):
Update tbl_test1 IN '\C:Tempabc.mdb', tbl_test2
set tbl_test1.Name = tbl_test2.Name
Where tbl_test1.ID = tbl_test2.ID
I tried a couple of variations, however, I keep getting an error.
Also, I don't want to create a database link (due to the sheer complexity of my project, which I'll spare you the details..)
Does anyone know how to do this? I searched the forums and came up with zilch! =(.. Help??!
Hi folks.. I'm trying to dynamicly create a table in an existing ACCESS database..
Here's wat i'm using:
PHP Code:<%
strDB = "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" & Server.MapPath("../../../imgdbase/vrienden.mdb") & ";Uid=Admin;Pwd=mljiscool;"
sql = "CREATE TABLE " & request("login") & " (id INT(10) PRIMARY KEY AUTO_INCREMENT, email VARCHAR(155), gevalideerd VARCHAR(10) DEFAULT 'nee', inlogCount INT(10) DEFAULT 0, lastLogin DATETIME)"
Set DBConn = Server.CreateObject("ADODB.Connection")
DBConn.Open strDB
DBConn.Execute sql
DBConn.close
Set DBConn=Nothing
%>
Code:I'm getting this error:Microsoft OLE DB Provider for ODBC Drivers error '80040e14'[Microsoft][ODBC Microsoft Access Driver] Syntax error in CREATE TABLE statement./mljnew/welcomeportal/registration/registration/test.asp, line 7
What am I doing wrong ??? The code here is probably the MySql correct code (Access uses different data types / field names ???) Hope somebody can help me out, because I can't find the correct data types anywhere ! (like use TEXT instead of VARCHAR, that's all I know...)
Here's the actual sql i'm using (displayed by response.write sql):
CREATE TABLE roel (id INT(10) PRIMARY KEY AUTO_INCREMENT, email VARCHAR(155), gevalideerd VARCHAR(10) DEFAULT 'nee', inlogCount INT(10) DEFAULT 0, lastLogin DATETIME)
Thnx !!!!
Roel.
Hi guys i tried to run this create table statement and each time i get syntax error.
I pasted the code in sql view windows of access 2000 and pressed the run code and i get
this error massage saying there is syntax error. Could any one help me write correct
create table statement that does not give me this error.I know u might tell me why u
do not create table in design view or .. but i want to do this since i want learn this
method as well.thanks
CREATE TABLE PLAYERS
(PLAYERNO SMALLINT NOT NULL CHECK (PLAYERNO >0),
NAME CHAR(25) NOT NULL ,
INITIALS CHAR(5) NOT NULL ,
BIRTH_DATE DATETIME,
SEX CHAR(1) NOT NULL ,
JOINED SMALLINT CHECK (JOINED >=1980),
STREET CHAR(15) NOT NULL ,
HOUSENO CHAR(4),
POSTCODE CHAR(6),
TOWN CHAR(10) NOT NULL ,
PHONENO CHAR(10),
LEAGUENO CHAR(4),
PRIMARY KEY (PLAYERNO)
)
Can anybody help me understand why I get the error
"Syntax error in CONSTRAINT clause"?
I get it in Access 2003 and Access 2007.
Both are clean installs with no add-ins
Running this code in VBA, or pasting the SQL directly in a query results in the same error.
Sub test()
sTableName = "Test"
sSQL = "CREATE TABLE " & sTableName & "_Config (" _
& "[idConfig] Int Primary Key," _
& "[Config] Memo," _
& "[Instrument] int," _
& "[Serial_No] Text(25)," _
& "[Firmware] int," _
& "[Orientation] int," _
& "[Sensors] int," _
& "[Sensor_Size] float," _
& "[Sensor_1_Distance] float)"
DoCmd.RunSQL sSQL
sSQL = "CREATE TABLE " & sTableName & "_Leader (" _
& "[idLeader] Int Primary Key," _
& "[idGroup] int," _
& "[idFile] int," _
& "[idConfig] int," _
& "[DateTime] DateTime," _
& "[Heading] float, [Pitch] float, [Roll] float," _
& "[Pressure] float, [Depth_BSL] float, [Height_ASB] float,"
_
& "[Min_Valid_Sensor] int, [Max_Valid_Sensor] int," _
& "[ASM_Bed_Level] float," _
& "CONSTRAINT [FK_Test_Leader_idConfig] FOREIGN KEY ([idConfig]) REFERENCES [Test_Config] ([idConfig]) ON DELETE CASCADE ON UPDATE CASCADE" _
& ")"
DoCmd.RunSQL sSQL
End Sub
The first table is created just fine.
And if I leave the constraint clause out, the second table is created also.
If I try to run it as an SQL query right in Access, after the error is delivered, it highlights the word DELETE, and if I reverse the update and delete portions, it highlights the word UPDATE.
I have looked up the clause in Access help and even using their example, i get the same error.
Any help will surely be appreciated!
What is the syntax of create table and insert statement for access 2000 db.
I want to paste the create table and insert statement to access 2000 "sql view window".
Therefore i want the correct syntax and format for these statements.
The reason that i want do this is that I created an application that generates create
table and insert statements for access db in text file and this way i want to test my application if it
generated the statement correctly.
Hi guys i tried to run this create table statement and each time i get syntax error.
I pasted the code in sql view windows of access 2000 and pressed the run code and i get
this error massage saying there is syntax error. Could any one help me write correct
create table statement that does not give me this error.I know u might tell me why u
do not create table in design view or .. but i want to do this since i want learn this
method as well.thanks
Code:CREATE TABLE PLAYERS(PLAYERNO SMALLINT NOT NULL CHECK (PLAYERNO >0),NAME CHAR(25) NOT NULL ,INITIALS CHAR(5) NOT NULL ,BIRTH_DATE DATETIME,SEX CHAR(1) NOT NULL ,JOINED SMALLINT CHECK (JOINED >=1980),STREET CHAR(15) NOT NULL ,HOUSENO CHAR(4),POSTCODE CHAR(6),TOWN CHAR(10) NOT NULL ,PHONENO CHAR(10),LEAGUENO CHAR(4),PRIMARY KEY (PLAYERNO))
I am pretty new to access and trying to create a form to enter data into a table. I keep getting a syntax error. Below is the part of code where I keep getting the syntax.
CurrentDb.Execute "INSERT INFO [Tb1 - Information]([Zone], [Controller], [Controller Type], [Panel], [CB #], [Controller Unit], [IP Address], [Modbus Address], [Sub Address/ HTC#], [PP Location], [Opp Priority],[ Startup Priority]) " & _
" VALUES('" & Me.Txtehtzone & "', '" & _
Me.Txtctrler & "','" & _
Me.TxtCB & "','" & _
[Code] ....
For instance, first table export to EXCEL CELL A1 and then second table export to the same EXCEL but to CELL A5! I simply do not know the sytax to tell ACCESS to do the correct export!
e.g. DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel9, "EXPORTDATA", "c:EXCELSHEET.xls", True
what is the correct syntax to write a command line able to UPDATE more than one field in the table records having multiple WHERE criteria.
Here is my challenge:My TableI has the columns A, B, C and D which are populated, for example, as follows:
TableI
A B C D
1 2
2 6 4 3
1 7 5 9
1 2
2 5 8 5
etc.
I also have a FormII which updates TableII. Among the existing fields of TableII there are the fields C and D (same as above). When saving data entry thru the save button of the FormII, fields C and D will be naturally saved on the TableII. Well, I also want C and D info updated into Table I as well, but only when field A=1 and B=2.So what I need (for the click event of the button save in the FormII) is to open TableI and either insert or update it with the values of the fields C and D in every record WHERE A=1 AND B=2.For instance, assuming C=& and D=%, the desired result should be as follows:
TableI
A B C D
1 2 & %
2 6 4 3
1 7 5 9
1 2 & %
2 5 8 5
I did not find any examples in the net including multiple criteria..Here is what I wrote unsuccesfully:
Private Sub BtSalvarFrmII_Click()
CurrentDb.execute "UPDATE TableI"
Set FieldC = Forms!FrmII!FieldC.value AND Set FieldD = Forms!FrmII!FieldD.value WHERE FieldA = 1 AND FieldB = 2
Docmd.save
Docmd.close
End Sub
What would be the correct syntax?
I have created a frmOrder form that uses autofill fields using dlookup when a company name is selected from the cboCompany combobox.
However!
I noticed that the value that has beed retrieved from dlookup function are not stored in the table (tblOrder).
How can I achieve this?
I have written the code in the control source of the field (in this case: LastName field) in the form like this:
=DLookUp("[LNamePIC]","tblCompany","CompanyID=" & [cboCompany])
The DLookup works fine, just I want the value to be stored in the table. Please help me ! I have been browsing the internet for the whole day and i can't seem to find the right solution!
Thanks!
This is my code.
=DLookUp("[ItemDescription]","MasterData","[BarcodeID] = " & [Forms]![frmMasterData]![Barcode])
I have a from called "TakeOn". The from is based on a table, called "tblTakeOn" with fields ID, Barcode, ItemDescription and SerialNumber.
In the form "Take On" is is a combobox named barcode, that looks up the bacode values from a table called "MasterData".
The "MasterData" table has only 3 fields, ID, Barcode and ItemDescription.
I want to in the "TakeOn" Form to, in the ItemDescription Field, display the ItemDescription from the ItemDescription value in the 'MasterData" table.
Access displays a circular reference error message.
I have two tables each containing fields Brand, Form, Area. Table 1 has some other information that needs to be gathered (data entry) and Table 2 is just a reference table for changes to these areas. This reference table has an additional field labeled area point value which is the value I want to "print".
The form is based off of Table 1 and has all of the fields I want the users to input. Stripped down, I have three combo boxes for the user to choose Brand, Form, and Area...I also have an unbound textbox control where I want the area point value to based off of the value of the three aforementioned boxes.. I believe this can be achieved with a lookup but I've never actually used a lookup in a control this complex before...
I'm pretty familiar with getting values from a table via Dlookup. What I want to do is almost the reverse if possible? I'm declaring a variable as follows:
Dim Ref as string
Ref = [lead_id]
This is from a form.What I'd like to be able to do is go to the table [list], reference the lead ID in the table via the variable then change the field [status] to "INCALL".Can this be done in a similar way to Dlookup?
UPDATE - here is the code I am trying to use
Dim ref As String
ref = [lead_id]
Dim MySQL As String
MySQL = "UPDATE vicidial_list SET"
MySQL = MySQL & "vicidial_list.status = 'INCALL' "
MySQL = MySQL & "WHERE (((vicidial_list.status)= Ref))"
DoCmd.RunSQL MySQL
Which gives me an update clause error
Iv got a Form (Form1).That has a combo Box (Description)and a Text box (Category).that refers to a Table (tblDescriptionLU)With a text Field (Description) and a Lookup Field (Category) to a Table (tblListOfCategorys)
The Code iv Put in is:
Private Sub Description_AfterUpdate()
Category = DLookup("Category", "tblDescriptionLU", "Description=" & Description)
End Sub
It returns a Error:
Run-time error '3464':
Data type mismatch in criteria expression.