Hi,
In a form i use the following filter fonction :
DoCmd.ApplyFilter , "CliNom = '" & RunCli & "'"
The problem is that sometimes RunCli (wich is a name) contains ' symbol and then generates a syntaxe error, is there a way to prevent that ?
Thanks in advance.
VINCENT
Hi,
in the following code:
Dim dbtmp As DAO.Database
Dim tblObj As DAO.TableDef
Dim rs As DAO.Recordset
Set dbtmp = OpenDatabase("C:WINDOWSBureaudevcli.xls", False, True, "Excel 8.0;")
DoEvents
Set rs = dbtmp.OpenRecordset("select * from [DEVCLI$A1:C10]")
in the last line i would like replace DEVCLI (the Excel sheet name) by a variable to make my program works with any excel file.
What is the syntaxe for that ?
Thanks in advance for help.
VINCENT
Think my syntax is wrong here, but not sure where. I would appreciate any help! Thanks!
SELECT a.[FA Ctr], a.[SAP Co], a.[SAP Ctr], a.[GL Co],
IIf([Len([SAP CO])] ="3",""0"' & [a].[SAP CO]", IIf([Len([SAP CO])]="2",""'00"' & [a].[SAP CO]"), IIf([Len([SAP CO])]="1",""'00"' & [a].[SAP CO]", "[A].[SAP CO]"))) AS Expr3
INTO [Interim Table]
FROM Asset_Map AS a
Hi there
I'm trying to write a query using an IIF statement in the "Field" property of the Access Query Design Grid the new Column is called F:
there are 3 Columns, System, Etot, Itot in a mytable
Basically in English the query goes,
IF mytable.[System] = 700,
mytable.[Etot] = 0,
mytable.[Itot] = 0
then the newly created derived column
mytable.[F] "N/A"
OTHERWISE
mytable.[F] "OK"
I hope someone understands,
Batwings
Hi,
I wud like to know why this syntax is not working.
select * from table_name where col_val like 'a%'
This returns the column values that start with 'a'. I was getting the result properly few days ago. But now suddenly this query doesnot give the result. When i tried this out in a website it was working there, but not in access.
Can anybody see what is wrong in this syntax? If the syntax is right where wud be the fault?
Can someone tell me how to insert the contents of a variable into a table?
I am trying to add selected items from a listbox (Members) into a temporary table (tempMembers). The code is below. On debugging, it picks up the contents of the variable (iMemberID) OK, but adds "0" to the temp table (both are integers). I'm pretty sure the problem is in the Insert statement below (stSQL3), but I can't figure out how to write it!
Any help would be greatly appreciated!
Thanks
stSQL3 = "INSERT INTO tempMembers (MemberID) VALUES & iMemberID & ;"
For Each varItm In Me!Members.ItemsSelected
iMemberID = ctl.ItemData(varItm)
DoCmd.RunSQL stSQL3
Next varItm
Can anyone tell me the proper syntax for:
1. Calling another Form from within a Form
2. Calling a module from within a Form
Thanks in Advance
Can someone help me on the syntax for the following?
I have two tables: one is TapeNumber and has one field (Tape_No) autonumbered PK. The other table has information about the video and uses the Tape_No as a secondary key.
I have a form to add information about videos. I have the form bound to the first table, so it adds a new TapeNumber when I add a record. I have a subform displaying the video information for that tape (there may be several videos recorded on one tape).
When I add a new tape (or video to an existing tape), how do I save the tape number to the second table?
Thanks!
have this code which keeps on giving me this error...I dont know whats wrong with the code please help tried removing the quotes (rstStudents.Open "SELECT * FROM Students WHERE Regno = " & _
txtReg , _
CurrentProject.Connection, _
adOpenStatic, adLockReadOnly, adCmdText) but then it wont retain any records even if they exist in the table
here is the original code
rstStudents.Open "SELECT * FROM Students WHERE Regno = '" & _
txtReg & "'", _
CurrentProject.Connection, _
adOpenStatic, adLockReadOnly, adCmdText
ERROR MESSAGE>>>>>>> Runtime Error '-2147217913 (80040e07)
Data type mismatch in criteria expression
the code is supposed to use number input by user to search in a table and fill all the other fields in the form with the table data (it is run on lost focus of the text box were value has been input)
the whole code :::::
Private Sub txtReg_LostFocus()
Dim rstStudents As ADODB.Recordset
Dim blnFound As Boolean
Dim fldItem As ADODB.Field
blnFound = False
If Me.txtReg = "" Then Exit Sub
Set rstStudents = New ADODB.Recordset
rstStudents.Open "SELECT * FROM Students WHERE Regno = '" & _
txtReg & "'", _
CurrentProject.Connection, _
adOpenStatic, adLockReadOnly, adCmdText
With rstStudents
While Not .EOF
For Each fldItem In .Fields
If fldItem.Name = "Regno" Then
If fldItem.Value = txtReg Then
Me.txtName = .Fields("Name")
Me.txtAdd = .Fields("Address")
Me.txttel = .Fields("Telno")
Me.txtTutor = .Fields("TutorName")
Me.txtbks = .Fields("NoBooksonloan")
blnFound = True
End If
End If
Next
.MoveNext
Wend
End With
If blnFound = False Then
MsgBox "No student record to display"
' ... and reset the form
' cmdReset_Click
End If
rstStudents.Close
Set rstStudents = Nothing
End Sub
I am trying to open a PDF from Access. I get it to work but it requires me to hard code the path and fiel name....
The path will always be the same although the file name will change. RIght now I get the fiel name from a textbox on a form...I am trying to change the below working code with a varaible instead of the path....I think there is some systax issues that I cannto fingure out
TotPath is the variable that holds the entire path to the file "X:Map_LibraryPark_and_Rec_AsbuiltPRA_19_73-01_W0.pdf"
This variable is rebuilt everytime the user selects something on the form....so the actual File name will change every time...
Does anyone have and ideas as to how to incorporate a variable instead of the hard coded path?
THank you all for your help.....
Code:WORKING CODE: 'Shell "C:Program FilesAdobeAcrobat 7.0AcrobatAcrobat.exe X:Map_LibraryPark_and_Rec_AsbuiltPRA_19_73-01_W0.pdf", vbMaximizedFocus ' open a txt documentNOT WORKING CODE:Shell "C:Program FilesAdobeAcrobat 7.0AcrobatAcrobat.exe TotPath", vbMaximizedFocus ' open a txt document
I'm familiar with SQL but not with Access97 - some wierd syntax here!
I'm creating a Query that is to Delete records from a table depending on a non-key field in a second table.
I first tried an INNER JOIN
DELETE Activity_Preferences.*
FROM Activity_Preferences INNER JOIN Activity_Key
Activity_Preferences.Activity_Key=Activity_Key.Act ivity_Key AND Activity_Key.Complete=1;
which was initially accepted but then complained about the INNER JOIN after I went in a second time to 'fix' the error.
I've finally got the following syntax accepted:-
DELETE Activity_Preferences.*
FROM Activity_Preferences, Activity_Key
WHERE Activity_Preferences.Activity_Key=Activity_Key.Act ivity_Key AND Activity_Key.Complete=1;
But when executed still gets the following error (same as for the INNER JOIN):-
'Operation must use an updatable query'.
What else is needed?
J.
:confused:
On my form I have 2 radio buttons rdoAll and rdoSpecific. If rdoAll is true then it prints a report. THis part works fine. However if rdoSpecific is true then I make visable combo box to look up an ID. Then when I click the button I want the same form to open but with just the info pertaining to the ID selected. Here is my code:
Private Sub cmdLotHistory_Click()
Dim stDocName As String, stSelection As String
stDocName = "rptLotHistory"
If Me.rdoAll = True Then
DoCmd.OpenReport "rptLotHistory", acViewPreview
End If
If Me.cboLotLU.Value > 0 Then
stSelection = "[LotID] =" & Me![cboLotLU]
End If
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
End Sub
When I choose the ID and click the button I get the message
Run-Time error '3075':
Syntax error (missing operator) in query expression '(LotID
=020806B1585)'.
the 020806B1585 is my ID number.
Debug hightlights the
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
but I'm guessing my real problem lies in the
stSelection = "[LotID] =" & Me![cboLotLU]
Can anyone point me in the right direction?
Thanks,
Rick
I am using the folling code in a after update combobox event:
Dim rst As DAO.Recordset
Dim sqlwhere As String
sqlwhere = " "
If IsNull(Me.comboSearchSerial) = False Then
sqlwhere = "SerialNumber='" & Me.comboSearchSerial & "' and "
End If
mysql = "SELECT TBL_RMA.* from [TBL_RMA] Where "
mysql = mysql & sqlwhere
mysql = mysql & ";"
Forms!FRM_RMA.RecordSource = mysql
Exit_comboSearchSerial_AfterUpdate:
This is currently working for me with SerialNumber being a text field. I would like to use the same code substituting SerialNumber with a Date field. I know its probly an issue with the use of quotes, but I can't seem to figure it out. Also, if I wanted to use a number format, what would I use...
Thanks
Gregg
I am receiving this error;
"Invalid SQL syntax, cannot use multiple columns in a column level CHECK constraint."
Without explaining my disaster of a situation anyone have any ideas?
Hi, I need some syntax help on the following line of code:
rs.FindFirst (rs![NewRecord] = True And IsNull(rs![Event_No]))
where NewRecord is type boolean and Event_No is string. Ive used this function mainly on strings so am not sure what to do with this one!
thanks!!
I have a FE/BE access database. I have split it for our business processes from the original owners who decided to keep it combined. I have in my code Set rst = CurrentDb which needs to point to the BE (where the tables are) and I am struggling with getting the proper syntax. My error msgs are as follows:
"Operation is not supported for this type of object" (most likely becuase the rst is nothing)
I then get an error msg related to the form that it cannot update the StudentID field.
The help VB help module is not able to display this information..
Any help is appreciated.
Thanks
Greetings,
I have a form under development that is to assign an invoice number to a specific set of records based on the client, contractor and job type.
All the above are combo boxes and the first 2 have rowsource directly from tables, no problem.
The 3rd, JobType is dependent on the first 2 being identified first. Thus the query builds from information on the loaded form.
I have built a query that obtains the data needed for the combo-box whose SQL is as follows:
SELECT [Lookup:Job_Description].Job
FROM (([Lookup:Clients] INNER JOIN [Lookup:Contractor] ON [Lookup:Clients].Client_ID = [Lookup:Contractor].Client_ID) INNER JOIN Contractor_Fees ON ([Lookup:Contractor].Contractor_ID = Contractor_Fees.ContractorID) AND ([Lookup:Contractor].Client_ID = Contractor_Fees.Client_ID)) INNER JOIN [Lookup:Job_Description] ON Contractor_Fees.Job_Type = [Lookup:Job_Description].Job_Key
WHERE ((([Lookup:Clients].Company_Name)=[Forms]![frmAssign_Invoice_Num]![cboCompanyName]) AND (([Lookup:Contractor].Contractor_Name)=[Forms]![frmAssign_Invoice_Num]![cboContractorName]));
--- hope you can read that!
I have attempted to format this so that it can be executed in code under the GotFocus event. My code, which does compile looks like this:
cboJobType.RowSource = "SELECT [Lookup:Job_Description].Job " & _
"FROM [Lookup:Clients] INNER JOIN [Lookup:Contractor] ON " & _
"[Lookup:Clients].Client_ID = [Lookup:Contractor].Client_ID " & _
"INNER JOIN Contractor_Fees ON " & _
"[Lookup:Contractor].Contractor_ID = [Contractor_Fees].ContractorID " & _
"AND [Lookup:Contractor].Client_ID = [Contractor_Fees].Client_ID " & _
"INNER JOIN [Lookup:Job_Description] ON " & _
"[Contractor_Fees].Job_Type = [Lookup:Job_Description].Job_Key " & _
"WHERE [Lookup:Clients].Company_Name = " & [Forms]![frmAssign_Invoice_Num]![cboCompanyName] & _
"AND [Lookup:Contractor].Contractor_Name = " & [Forms]![frmAssign_Invoice_Num]![cboContractorName]
But something is wrong that the compiler is missing. Can anyone find the error?
I have tremendous difficulty with sql in code. Is there any utility out there that can check syntax better than the in-program compiler?
My thanks in advance for any assistance. Right now, I am banging my head against the wall.
Regards, Sorrells
Greetings all,
I am trying to run the query below to tell me how much stock a company has available by deducting the amount dispatched from its allocation. I am getting an error message;
Run Time error '3061'
Too few parameters expect 2
The code is;
Dim db As DAO.Database, qr1 As DAO.QueryDefs
Dim rs1 As DAO.Recordset, rs2 As DAO.Recordset
Dim varVal0 As Variant, varVal1 As Variant, varVal2 As Variant
Dim strSQL As String
Set db = DBEngine(0)(0)
VarVal0 = Me.WINENUMBER
strSQL = "SELECT Sum(tbl_Data_DispatchLineitems.Amount) AS Amount "
strSQL = strSQL & "FROM tbl_data_DispatchDetails INNER JOIN tbl_Data_DispatchLineitems ON tbl_data_DispatchDetails.DispatchID = tbl_Data_DispatchLineitems.DispatchID "
strSQL = strSQL & "GROUP BY tbl_data_DispatchDetails.TradingName, tbl_Data_DispatchLineitems.WineNumber "
strSQL = strSQL & "HAVING ((tbl_data_DispatchDetails.TradingName)=[Forms]![frm_data_Orders]![TradingName]) AND (tbl_Data_DispatchLineitems.WineNumber = VarVal0)"
Set rs2 = db.OpenRecordset(strSQL)
rs2.Edit
varVal1 = rs2![Amount]
rs2.Close
I assume the error lies in the final line of the query code. Any help to find the error would be appreciated.
Thanks in advance.
~rbinder
I have a function that builds a filter and it get a syntex error. It has three components and I must be missing something in combining them into the filter. SpecID and ReviewID are numbers. Selected is a checkbox and 'Yes' is a string. Can anyone see the source of the Syntax Error?
Private Function PlanFilter()
Dim strFilter1 As String, strFilter2 As String, strFilter3 As String
strFilter1 = "[SpecID] = " & [Forms]![frmMainEntry]![SpecID]
strFilter2 = "[ReviewID] = " & [Forms]![frmMainEntry].Form!fctlReviewRequests!ReviewID
strFilter3 = "[Selected] = 'Yes'"
gstrFilter = strFilter1 & " And " & strFilter2 & " And " & strFilter3 & ";"
Debug.Print gstrFilter
End Function
Thanks,
PC
This is my current SQL Statement:
SELECT [qryGroupByAMCount].[TestCode], [qryGroupByAMCount].[Price], [qryGroupByAMCount].[HID], [qryGroupByAMCount].[Month], [qryGroupByAMCount].[CountOfAutoNumber], IIf([TESTCODE]="PTCGCD",[CountOfAutonumber]*2,IIf([TESTCODE]="LSHABC",[CountofAutonumber]*4,IIf([TESTCODE]="HPVPNL",[CountOfAutonumber]*2,IIf([TESTCODE]="TOXOAB",[CountofAutonumber]*2,[CountofAutonumber])))) AS Extended
FROM qryGroupByAMCount;
I wanted to add some SQL which will filter out some entries in this format:
<> "TestCodeName1" or <> "TestCodeName2" <> "TestCodeName3"...
How do i incorporate this statement into mine?
Hi there,
Having problem with this parameter query which works off of a form and don't know how to resolve. Error being:-
"Run-Time error 2342...A RunSQL action requires an argument consisting of an SQL statement."
Dim mysql
mysql = "SELECT tbl_pallet_log.ID, tbl_pallet_log.Entry_Date, tbl_pallet_log.order_Number, tbl_pallet_log.Customer_No, tbl_pallet_log.Customer, tbl_pallet_log.Postcode, tbl_pallet_log.Pallets " & _
"FROM tbl_pallet_log " & _
"GROUP BY tbl_pallet_log.ID, tbl_pallet_log.Entry_Date, tbl_pallet_log.order_Number, tbl_pallet_log.Customer_No, tbl_pallet_log.Customer, tbl_pallet_log.Postcode, tbl_pallet_log.Pallets " & _
"HAVING (((tbl_pallet_log.Entry_Date) Between [Forms]![frm_customer_pallet_report]![txt_date_from] And [Forms]![frm_customer_pallet_report]![txt_date_to]));"
DoCmd.RunSQL mysql
Thanks in advance.
Paul.
I'm not sure this can be done,but here goes it, I have 5 [plants] A, B, C, D & E. If one plant recieved [A] plant reject [Reject] then I need a response from plants B, C, D & E. If plant [B] receives a reject then I need a response from plant A, C, D and E. How would I show what other plants havent' responded>
How would I create a query for this? any idea's would be greatly appreciated
I keep on getting a syntax error on the first [MU_ID]. Can anyone tell me what am I doing wrong please? You can e-mail me at Frank.Cappas@CIGNA.Com
Site: IF [MU_ID] BETWEEN ((SELECT [MU_Start] FROM [Sites] WHERE [Site] = “BRB”) AND (SELECT [MU_End] FROM [Sites] WHERE [Site] = “BRB”), “BRB”, {IF [MU_ID] BETWEEN ((SELECT [MU_Start] FROM [Sites] WHERE [Site] = “BRI”) AND (SELECT [MU_End] FROM [Sites] WHERE [Site] = “BRI”},"BRI")
Thank you so much in advance,
Frank
Hello
I'm trying to convert my exsting LIKE Command to search Contians a word.
Example currently it will search for word starting with word in the search box.
I type in 2006, it will only look for project names starting with 2006.
I would like to Motify the search to "Contain" 2006 in the field anywhere.
Here's the code I like to convert.
"SELECT * FROM [qryProjects]" & "[PROJECT] LIKE """ & Me.txtSearchString2 & "*"" AND "
I'm trying to get my head round this query and not having much luck.
I have table that contains. amongst others, two fields I need to use - Date and Amount. I already have a query that returns me the number of entries for a given month, along with the total value.
SELECT Count(*) AS [Number of Entries],
Sum(NBReferral.[Amount]) AS [Total Amount],
NBReferral.Date
FROM NBReferral
GROUP BY NBReferral.Date;
What I want is to also provide a running total (year to date). Using this:
SELECT Count(*) AS [YTD Number of Entries],
Sum(NBReferral.[Amtount]) AS [YTD Total Amount]
FROM NBReferral;
Combing the two queries works as long as there is only one month. Unfortunately, I'd like to see each month's YTD figure displayed as shown
Date Number of Entries Total Amount YTD Number of Entries YTD Total Amount
Nov 2006 5 10000 5 10000
Dec 2006 3 5000 8 15000
Jan 2007 6 12000 14 27000
etc.
What I currently get, as you would expect, are the same YTD totals applied to each month:
Date Number of Entries Total Amount YTD Number of Entries YTD Total Amount
Nov 2006 5 10000 14 27000
Dec 2006 3 5000 14 27000
Jan 2007 6 12000 14 27000
etc.
Probably a fairly straight-forward query for someone with a bit more experience. Any ideas?
I'm running a VBA query in excel trying to import the field from a table, simple so I thought, any idea on why i'm getting syntax error codes on this part?
Application.StatusBar = "Retrieving Depot Names"
sSQL = "SELECT tbldepot.DepotName 'Depot' " & vbCr & _
"FROM tbldepot, " & vbCr & _
"GROUP BY tbldepot.DepotName "
getSQLintoRange sSQL, Cells(1, iCol), True, True
iCol = iCol + 2
same thing on
'-= DFE =-
'Some manual DFEs have auth code but left at created
'AAP children have the DFE, not parent
Application.StatusBar = "Retrieving DFE Values"
sSQL = "SELECT tbldepot.DepotName 'Depot', " & vbCr & _
" SUM (di.Qty * di.Rate) 'DFEVal' " & vbCr & _
"FROM tblA537 a, tblA537DFE d, tblA537DFEItem di, tblDepot " & vbCr & _
"WHERE tblDepot.DepotID = a.DepotID " & vbCr & _
"AND a.OrderNumber = d.OrderNumber AND d.DFEID = di.DFEID " & vbCr & _
"AND NOT d.Authorisation IS NULL AND d.DFEStatus<>4 " & vbCr & _
"GROUP BY tblDepot.DepotName " & vbCr & _
"ORDER tblDepot.DepotName "
getSQLintoRange sSQL, Cells(1, iCol), True, True
iCol = iCol + 2