Tab Control Not Visible On Form Open
Jan 27, 2006
I've searched this forum and have been reading for over 2 hours now and still can't find an answer to this (although I have learned a bunch of other stuff :) ). So I appoligize if this have been answered before...
When I open my form my tab control is off screen (above the current view). I can use the slider on the left to move back up to the top of the form and see them... but why can't I make this happen automatically. This happens because one of my tabs is quite long (has several sub-forms on it). I even tried putting an empty label box above the tab control but it doesn't seem to help. I've turned off the Auto-Center and the Auto-Resize for the form. I can't find anything that helps.
Any idea? Please help.
Thanks,
Jeff
View Replies
ADVERTISEMENT
Nov 24, 2013
How to use the combo box from the form to control subform button or textbox visible or not?
View 5 Replies
View Related
Feb 27, 2015
Form 1: I have a combo box on my main menu(MenuMainF) called cboCompanyType with typical values 1,2,3,4,5,etc......
Form 2: I have a command button on my administration menu(MenuAdminF) called cmdDevelopment
My goal is to have the cmdDevelopment button of Form 2 be visible if cboCompanyType on Form 1 is equal to 1,2,3, or 4, but if it is any other value, then cmdDevelopment should be not visible.
View 1 Replies
View Related
Aug 29, 2012
When loading a form often some of the text is missing, headers are not there and/or the colours for the background are simple white, until I either resize the form or scroll up and down a few times.
View 1 Replies
View Related
Sep 21, 2005
Help - I have created a control button in a form using the wizard and in design view it is at the top underneath all the headings (in the form header) but when I go to normal view it is not there. I have checked the properties and it is down as visible yes display always and transparent no. I am now stumped as to why it's not there - any help appreciated!! :)
View 14 Replies
View Related
Mar 9, 2006
I was able to use coding for making controls visible or not in the attached database.
I have a main form with a tab control that has 3 tabs with subforms in them.
What I am not able to do is in the Tab Control I want the 3rd tab to be invisible and on the second tab where it says “May we go through the questions now?”, I have a check box. When that check box is checked I want the 3rd tab to become visible.
I am having problems figuring out this code to reference the Tab Control Page.
Do you have any suggestions?
I can attached the database if necessary.
I appreciate any help that you can give me.
View 5 Replies
View Related
Jul 12, 2014
How do I get VBA to say: Go to the first control in the tab index after the current active control (that is visible atm),
except such and such controls (because they will lose visibility in a moment).
View 14 Replies
View Related
Jun 21, 2013
I have modal form - frmZlecenia
I would like to copy one control, then close this form, open concrete form and pass value to control.
My code is
Private Sub Menu_Click()
DoCmd.OpenForm "frmZleceniaMarzenaNawigacjaPD"
Forms!frmZleceniaMarzenaNawigacjaPD.Form!Imie = Me.Imie
Forms!frmZleceniaMarzenaNawigacjaPD.Form!Imie.SetFocus
DoCmd.Close acForm, Me.name
End Sub
The problem is, still opens the previous form, not form "frmZlecenia"
e.g If I open form x then from this form I open my modal form "frmZlecenia" and then I will click "menu" button - now form "x" is open :/, but should be "frmZleceniaMarzenaNawigacjaPD"
There is some way to open concrete form from modal form?
View 1 Replies
View Related
Feb 23, 2014
If it possible to change if a group is visible based on what page a different group is printed on.
The report I'm working on is a Invoice and it has subtotals in one group and totals in another group.
If the totals are going to print on page 1 then there is no need to print the subtotals. Is there a way to know what page the totals will print on so I can set visible for subtotal group to true or false?
View 6 Replies
View Related
Jun 18, 2015
I need to have a subform that shows up smack dab in the middle of my main screen when visible - which is what I want - but only based on a specific value of a control on the main form. Specifically, if a control's value is "See Spreadsheet", I want the subform visible front and center as it contains the link to the server location for that specific record. If the control's value is not "See Spreadsheet", I want the form to be invisible.
My code:
If Me.BudgetsFacultyAccountNumber = "SEE SPREADSHEET" Then
Me.frmMsgBoxUpdateSpreadsheet.Form.Visible = True
Me.BudgetsFacultyServerLocation.Visible = True
Else:
Me.frmMsgBoxUpdateSpreadsheet.Form.Visible = False
Me.BudgetsFacultyServerLocation.Visible = False
End If
The red lines result in an MS VBA error: "Compile error: Method or data member not found."
I've tried referencing that subform a hundred different ways, but I can't get it to work.
View 5 Replies
View Related
Feb 24, 2015
I have a from that has information icons that opens a separate form to support users make the right choice on a form. With each information form users are able to choose "Yes" or "No" and then it returns them back to the form they started. I am having trouble setting the focus to the control the user original left the form from.
Form A
Control 1
Control 2
Control 3
Form B
Information for Control 1
Form C
Information for Control 2
Form D
Information for Control 3
For Forms B - C I would like the form to close, open Form A and then set focus to the control that the form was providing information for.For example, if you are on Form C and you make a decision, I want Form C to close, Form A to open and focus to be set to Control 2.
Code:
Private Sub image5_Click()
Dim sWHERE As String
Criminal_Background.Value = "Yes"
[code]...
View 8 Replies
View Related
Dec 2, 2014
My company has a new database that we will use to track PTO (paid time off/vacation), including the submission/approval process. Not everyone should have access to the approval dashboard as that should be restricted to only managers. Everyone will have the same basic form so that they can see their PTO history, hours remaining to be used, etc.
What I want to do is have a button on the form that is visible only if the person is a manager. The button will open the PTO approval form. How can I make a button visible/invisible based on user access levels?
View 11 Replies
View Related
Dec 15, 2006
Private Sub btncard_Click()
Dim stLinkCriteria As String
DoCmd.RunCommand acCmdSaveRecord
stLinkCriteria = "[jobref]=" & "'" & Me![jobref] & "'"
DoCmd.Close
DoCmd.OpenForm "k_job_card", , , stLinkCriteria
End Sub
this button code opens the k_job_card form.
the form opens and says 'Record 1 of 1, (Filtered)
i have a control on the form that opens.. and i am simply trying to assign a default value to that control..
it is a textbox.. for my jobtype field (text datatype)..
is there any particular reason why i cannot assign a default value to a control if it has been placed on a form that has been opened using a form filter?
this is how the Form Data tab is set at the moment..
View 3 Replies
View Related
Oct 13, 2015
I am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close()
If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then
Application.Quit
Else
???
End If
End Sub
View 5 Replies
View Related
Aug 2, 2012
I'm trying to open a recordset in vba and I'm getting the 3061 runtime error,Expected 1.
I'm trying to open a recordset with a query that uses a reference to a form control.
Code:
searchtable1 = "qInVisio_RSV"
Set rs = db.OpenRecordset(searchtable1, dbOpenDynaset, dbSeeChanges)
This is the sql of the query:
The highlighted parted is the form referance ( I know it's obvious, just for easier spotting )
Code:
SELECT dbo_FOLIO.FOLIOID, dbo_FOLIO.KIND, dbo_FOLIO.RSVID, dbo_FOLIO.CHKIDATE, dbo_RLIST.ROOMID, dbo_ROOM.ROOMNO, dbo_AGN.LINAPRG
FROM (dbo_ROOM INNER JOIN (dbo_FOLIO INNER JOIN dbo_RLIST ON dbo_FOLIO.RSVID = dbo_RLIST.RSVID) ON dbo_ROOM.ROOMID = dbo_RLIST.ROOMID) LEFT JOIN dbo_AGN ON dbo_FOLIO.AGNID = dbo_AGN.AGNID
WHERE (((dbo_FOLIO.KIND)=101) AND ((dbo_FOLIO.CHKIDATE)>=[Forms]![frmCleaningPlan]![DTPicker]));
also as you can see it's a datepicker control, so the value is a date...
View 2 Replies
View Related
Oct 17, 2013
I have a combobox on my form called TypeOfBusiness, with fields including Corporation, Education, Industry, Non-Profit. In order to make a second combobox called IndustryClassification appear when Industry is selected from the TypeOfBusiness combobox, I have used the following code:
Code:
Private Sub Form_Current()
If Me.TypeOfBusiness = "Industry" Then
Me.IndustryClassification.Visible = True
Else
Me.IndustryClassification.Visible = False
[Code] .....
It works just fine. However, when a user selects both, say, Industry and Education, the IndustryClassification combobox will not appear. What code I can use to ensure the IndustryClassification box will appear regardless if another box is checked in addition to Industry? I am wondering if it has to do with the Column attribute.
View 14 Replies
View Related
Mar 24, 2015
I have a Main Form with a Sub-Form, the sub-form is base off a query. on the sub-form i have 8 controls, one of them is "Status' and "Process" and "Review" My Main Form have a Refresh command that refreshes the data in the sub-form.
What i am trying to do is make the "Process" Control only visible is "Status" is a certain status and "Review" visible if "Status" is something else. what i have done works correctly On Open. I run into and issue on the refresh command. I get Run-time error '2165' "You can't hide a control that has the focus"
Code:
If Forms!Main_Form.[Name subform]!Status = "Ready" Then
Forms!Main_Form.[Name subform]!Process.Visible = True
Forms!Main_Form.[Name subform]!Review.Visible = False
ElseIf Forms!Main_Form.[Name subform]!Status = "Reviewing" Then
Forms!Main_Form.[Name subform]!Review.Visible = True
Forms!Main_Form.[Name subform]!Process.Visible = False
End If
I have done similar with a main form and making sub-form visible or not based on a control on a main form and that has worked perfectly. I am not sure how the control is getting focus and cause the error.
View 4 Replies
View Related
Sep 12, 2004
I have a form with four subforms set up in a tabs on the form. In the subforms I have a copuple of command buttons which enable/make visible fields when they are clicked (see previous posts but for eg) - if a height and a weight are added in two separate boxes a calculation is done and then a command button pressed to make visible the (label) which shows the mass index the patient falls into. My problem is that the label is then retained so if I click out of the form and re-enter with a new patient then the height and weight boxes are clear but the label from the previous patient remains.
I tried to put the code
Private Sub Form_Load()
If PtWeight = Null And PtHeight = Null And Text60 = Null Then
Label106.Visible = False
Label101.Visible = False
Label177.Visible = False
Label122.Visible = False
Label123.Visible = False
End If
End Sub
in both the open and on load event of the main form (not the subform) but it doesn't help. Any ideas?
(When should code be put on the main form and when on the subform?)
View 2 Replies
View Related
Jul 26, 2005
the wizard does not have a button to open tables...i have been using this code to open forms...what needs to be changed in order to make it open tables?
Private Sub Command5_Click()
On Error GoTo Err_Command5_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "intakeMatrix"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_Command5_Click:
Exit Sub
Err_Command5_Click:
MsgBox Err.Description
Resume Exit_Command5_Click
End Sub
View 1 Replies
View Related
Mar 10, 2006
Hi
I am trying miserably to help a student use the Calendar Control to Open and Go to a specific record
I want to click on a specific date in the calendar in a form eg 09/03/06 and then open the "Bookings" form and go to the record with the field "Date" with the value 09/03/06
I can open the form lol
Can anyone help??
Thanks
Sara
View 2 Replies
View Related
Aug 30, 2013
I am having a problem with making a textbox visible on a form if a checkbox is checked on the same form. I have done research on this site and have written the code below, but I am getting a Syntax error, see yellow highlight.
- My checkbox is named: Case is a Readmission from WRCA IP to WRCA IP
- My textbox is named: Date of Current IP Admission (I have defaulted this textbox to not visible).
Here's the code I have written:
Private Sub Case_is_a_Readmission_from_WRCA_IP_to_WRCA_IP_Clic k()
If Case is a Readmission from WRCA IP to WRCA IP =true then
Date of Current IP Admission.visible=true
Else
Date of Current IP Admission.visible=false
[Code] .....
View 14 Replies
View Related
Oct 25, 2013
We have a database with one main data entry which stores records in a seperate table. There are several thousand records keyed in using this form. Therefore, alongside the entry we have a search form which allow the user to search for a specific record and display it in the main if he/she needs to edit one.
We have received a request from users for a functionality which allows users to browse all records, using the main form layout, that they have keyed in. I guess what I am asking is: Is there a way to limit the records visible in a form using field on that same form as a limitation (ie. the users name - which is a required key-in)?
View 2 Replies
View Related
Nov 24, 2014
I have a Lost/Found property database which we use to keep record of the lost/found property and it is working fine.
As per our organization's policy, we keep the item(s) for up to three months in which if it gets restored to the owner then fair enough otherwise after three months the item(s) can be claimed by the "Finder". But for this very purpose we issue the Finder with a "Claim Receipt" which he/she should bring in when claiming for the item(s) after three months period. Therefore, It's just the right time to upgrade the database to a more professional level.
The database has one table and two forms.
One form (LostFoundForm) is visible to the user in which they enter data, this form has two sections; Item(s) & Finder's details and the second section is about Restoring details.
However the second form (ClaimReceiptForm) is hidden to the users (for manual data entry) and has only one section which is exactly the same as the first form's first section, i.e., Item(s) & Finder's details. This second form takes the data automatically from the first form because the table behind them is same and fields are same (please see attachment). Up to here it's all working fine.
I would like to introduce a Checkbox or a CommandButton in the LostFoundForm which when we click should pull up a msgbox asking "Do you want to print the receipt for this item(s)?" with a Yes/No option. On clicking "No" it should, obviously, settle down but on clicking "Yes" it should print the "corresponding record" from the ClaimReceiptForm.
View 3 Replies
View Related
Apr 29, 2005
I created a little form containing informations the users need to see to insert the right values in other forms. I need to have this little form always visible even if the users are working with another form maximized.
Does it exist a code to do it?
View 4 Replies
View Related
Dec 22, 2006
Hi
I have a text filed on a tab control on a form. What I want to do is when the record is opened for viewing I am it changed the contents of that field. The reason that I am doing this is that I am auditing the changes in the database and any changes to any of the fields are recorded on the in this table along with the users windows username.
This would put an entry in the audit table for everytime a record was opened, even if no changes were made to the record and I want to use this information to create a last ten records form for the users to view there last ten records.
Does anybody know how I can do this.
Thanks
View 3 Replies
View Related
Sep 20, 2005
Greetings. I have three forms that are open at the same time. They are related and cascading. The first form (frmEventAdd) is the anchor. Each event can have many Trials. The second form is frmTrialInfo. Each Trial can have three Classes. The third form is frmClassInfo. These forms are used for update and adding new records.
The user displays an event for update (frmEventAdd). Then clicks on a button to display the Trials for that event (opens frmTrialInfo). frmTrialInfo displays information for one Trial at a time. The user clicks on a button to display class information for that trial (frmClassInfo).
One of the fields on frmClassInfo is called cboJudge. It's a combobox with names of Judges (judges of dog competitions). The judge information in the combobox comes from two tables: tblPeople and tblJudges. If the user wants to add a new judge they may click on the btnNewJudge. btnNewJudge will open a form that is used to add a new person (frmPeople).
Because frmPeople is opened from many different points in the application, I found it easier to simply make the three, already opened, forms INVISIBLE.
So...command button btnNewJudge opens frmPeople and makes frmEventAdd, frmTrialInfo, and frmClassInfo INVISIBLE.
When frmPeople is closed (btnClose), it checks to see if each of the previously opened/visible windows is open and then makes each VISIBLE, again. frmEventAdd and frmTrialInfo reappear just fine. However frmClassInfo does not.
I have traced the btnClose_Click routine in frmPeople and it certainly looks like every line of code is being hit, but the line that should make frmClassInfo visible does not do anything (nor does it generate any error).
Here is the code from btnClose_Click in frmPeople. Can you help me?
********************************************
Private Sub btnClose_Click()
On Error GoTo Err_btnClose_Click
Dim blnEventAdd_Open As Boolean
Dim blnTrialInfo_Open As Boolean
Dim blnClassInfo_Open As Boolean
blnSecondChance = False
If blnDataChanged = True Then
If DataHasChanged() = vbYes Then
Call btnSave_Click
End If
End If
'================================================= =======================================
'blnSecondChance=False = NO SECOND CHANCE ... Close this Form
'blnSecondChance=True = USER GETS A SECOND CHANCE ... Do NOT Close this Form
'================================================= =======================================
If blnSecondChance = False Then
'Zero out Relative Record Number from Array
svRecNo(intCallerIX) = 0
blnDoUpdate = False
blnDataChanged = False
DoCmd.Close acForm, Me.Name
'Is the frmEventAdd form open?
blnEventAdd_Open = SysCmd(acSysCmdGetObjectState, acForm, "frmEventAdd") And _
acObjStateOpen
'Is the frmTrialInfo form open?
blnTrialInfo_Open = SysCmd(acSysCmdGetObjectState, acForm, "frmTrialInfo") And _
acObjStateOpen
'Is the frmClassInfo form open?
blnClassInfo_Open = SysCmd(acSysCmdGetObjectState, acForm, "frmClassInfo") And _
acObjStateOpen
If blnEventAdd_Open Or blnTrialInfo_Open Or blnClassInfo_Open Then
If blnEventAdd_Open Then
Forms("frmEventAdd").Visible = True
Forms("frmEventAdd")!cboContact.Requery
Forms("frmEventAdd")!cboSecretary.Requery
End If
If blnTrialInfo_Open Then
Forms("frmTrialInfo").Visible = True
Forms("frmTrialInfo")!cboTrialRep.Requery
End If
If blnClassInfo_Open Then
Forms("frmClassInfo").Visible = True
Forms("frmClassInfo")!cboJudge.Requery
End If
intCallerIX = intCallerIX - 1
Else
DoCmd.OpenForm PopCaller(), acNormal
End If
End If
Exit_btnClose_Click:
Exit Sub
Err_btnClose_Click:
Call ShowError("frmPeople", "btnClose_Click", Err.Number, Err.Description)
Resume Exit_btnClose_Click
End Sub
******************************************
Regards,
SueB
View 3 Replies
View Related
