This has been annoying me to now end. I have a master form with 3 text boxes, and 3 subforms with about 26 more text boxes.
How can I make the tab stops flow from one subform to another? It's like the tab stops won't get "linked up" by virtue of them being on the same master form.
I'm using a combo box to pull data from a table to auto populate the fields on my form. But for some reason, it stops inserting the data after city (column(6) and I can't figure out what's going on. When I run the query the data is there, if I change the order of the columns, the data shows. Here's the code:
I'm trying to concatenate several fields from a set of tables/subtables. But for some reason, it concatenates the first 3 records, then stops. I should clarify that the concatenation "skips" a subtable. Here's the structure of the relationships (not sure if this pic is working so I'm adding the link to the screen shot)
[URL] ....
and the concatenation itself
As you can see, I'm looking to create a concatenation of (Vendor_Code)&(Vendor_Item_Code)&(Item_ID) which runs through the subtable Items_Child, but doesn't use any field in Items_Child
just wondering why randomly certain modules in the form code stop working..
when you accidentally press return.. or do something in the wrong order.. or apply one rule to one control.. and then another control rule stops working..
so you have to delete the code.. right click on the control's event.. and re-insert the code into the event section.. and then it works..
I have written a very simple query which get's it's criteria from a form I also created, which couldn't be any simpler itself. The form simply has a text box that I enter a value into, in this case, the date in a specific format "20041019". The query then pulls all records according to the form value. This query has always worked fine for weeks now. Today, suddenly it would not return any records. If I go into the SQL and manually enter "20041019" it will pull the appropriate records. It will NOT function when relying on the form value though. This has happened to me in the past, of course I did not document what I did to overcome the obstacle though. I have tried matchign the formats of the field in the table to the text box in the form so that they are both general numbers with 0 decimal places, originally they were both text format and it worked. I can't seem to figure out why this would happen. If anyone has any suggestions, I would GREATLY appreciate it.
I have a database with a table and 2 forms.One form (frmList) is a list of all records in the database, and the other form (frmInput) displays fields for a single record.There is a button in frmList which runs the following script. The user clicks a record in frmList, clicks the button, and the selected record opens in frmInput. ID is a text field containing digits and an alpha that is in both frmList and frmInput.
Code: Private Sub Command9_Click() Dim ID As String strCriteria = "ID = '" & Me.ID.Value & "'" DoCmd.OpenForm "frmInput", acNormal Form_frmInput.Recordset.FindFirst strCriteria End Sub
This script works as expected in Access 2010. However we recently upgraded to Access 2013 and since then, this script causes Access to crash ("Access has stopped working..." dialog appears).I have stepped through the script and the line causing the crash is
I can't find any problems with syntax or anything about Recordset.Findfirst being deprecated in 2013 so I suspected some kind of file corruption. To resolve this I have tried: Compacting and repairing the databaseDecompiling and recompiling the VBA modulesCreating a fresh database and copying all the objects into it
could this be due to a missing library or something? Are there other methods of resolving a corrupt database if that is the problem? Or as a last resort is there an alternative method to Recordset.FindFirst that I can use to open a form to a particular record while retaining the ability to navigate through other records?
I have a question about errors on null value.I have made a small database for tryout, it has to be implemented in another one.And the small database is working.I have one table where there is one field called BatchInput.I scan a barcode into it and let two query's breaking it apart. I scan this batch into the table field
BatchInput: 20 MAY 2004H149-082-79 A4147011A05
Then I have my first query (Qrybreak1) extracting the date and deleting H14
And query (QryResult) even wont start, giving a popup with Invalid procedure call..How could I handle Null on the part where there is no space after the partnumber (missing Certnumber)?
I'm using an Access 2010 report to recreate a spreadsheet that contains rows consisting of fourteen columns of data. Each column is totaled. The data types are numeric and the property sheet format is either Standard or Percent depdening on the column.
In order to track the totals, I utilize two text boxes for each column. One is visible and contains the data for that particular row. The other is hidden and has its Running Sum property set to "Over All". The final totals row consists of text boxes that reference the final result of the running sum text box.
This works up to a point. I see correct totals results for columns 1-10. Then for some reason the running count appears to stop for the second to last row of column 11. (It's always the second to last row). As a result, the totals for this column (11) and subsequent columns (12-14) do not total.
I'me running on Win7, Office 2010, Acc2003 format (.mdb), writing data to Excel 2010 (.xlsx)I have code to create an Excel file, send record set data to it, and then add some formulas and formatting. I was trying to tune up the formulas, when I got a pull back:Access VBA code suddenly stops running, and the file gets displayed in Excel
Code: 'ApXl is Application.Excel 'xlWSh is the Excel WorkSheet 'rst is my DAO.Recorset
I have an asset data base to generate individual asset detail reports with a sub report on the same page listing similar assets from a separate query. I have set the master and child fields, one to many. This works perfectly for the first two assets (pages), however the sub report stops showing data on the third asset (page).
Where can I find the Hex or RGB value for the blue colour that Access 2010 uses by default for buttons on forms? I need to change some buttons to yellow (I know the code for that) but later change them back to the previous shade of blue, which is shown in the Properties pane "Accent 1, Lighter 40%".
By clicking in the standard colors area at the bottom of the colour chooser I can find a very similar blue #D6DFEC but it doesn't look quite right. And the "accent" colour does not give me a Hex value.Is that "usual" blue even one colour? How can I reset a button to that style having changed it?
I have a bit of a problem with a database in Access 2013. On 1 of the forms, I have a number of buttons which open other forms and filter the results using an embedded macro. All has been well until a few days ago when error 2950 pop up box started appearing. After fiddling around for a while it all works OK (without actually changing anything) until next time the database is opened. I checked to make sure the location is "trusted" and all seems OK.
I have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.
I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??
Form Detail -Form does not allow additions or deletions. Edits allowed -All fields are disabled and locked -I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results
Here is my code
Code:
Dim rstMyForm As DAO.Recordset Set rstMyForm = Forms!MyForm.Form.Recordset rstMyForm.MoveFirst Do While Not rstMyForm.EOF If Not RequiredField.Value = "" Then
I have created a table for installer invoicing, and have a field for invoice amount. I have created a user input form that allows a user to fill in certain pay rates for different aspects of installation, and would like to know how to make the invoice amount a calculated control that will auto update the field InvoiceAmt in my table. I can't figure out how to do this in the property sheet.
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
I have a listbox on a subform (or a subform within a subform).
When it is clicked I want all other listboxes to unselect.
There may be listboxes on the mainform, on other subforms, on other subforms of subforms.
I imagine I'm looking at a recursive function of some sort, but I'm not entirely sure of syntax to identify parent and children forms...
pseudocode so far: loop all controls if control = listbox, unselect all if control = subform - recurse: loop all subform controls if control = parent... err... Fail.
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I am building a very comprehensive Membership Management Database with extremely useful facilities initiated by some 20 or 25 Queries..
The database includes 5 Tables which store data relevant to members, another which stores details of Interest Groups and a 3rd which stores which members are affiliated to which Group or Groups.
Currently the database is accessible only by a very limited number of persons and data can be entered/edited by only one person. The database, using Access 2010, is maintained on a desktop computer and synchronized to a copy on a Cloud.
My requirement is to permit some 50 Group Leaders to input/edit data on a Password protected Group Members Form such that that is the only element of the database that they can access. The Forms would have only 2 fields from which the user would select entries from drop down lists.
My query is ; is such a procedure feasible in principle and would I be correct in assuming that the user would require to have available a copy of Access.
I need to pull the calculated values from approximately 10 forms into another form. This is a summary form that should have all the totals pulled from the other forms.e.g. Form A has a textbox that reflects the sum of the amount. This is the total balance of form A.Form B, Form C, etc. all have a total Balance.Now, i need to pull all these totals into a summary form
-Form A Total Balance: x -Form B Total balance: y, and so forth.
How and what is the best method to approach?I have tried using Forms![Formname]![Total] to get the data. This necessitates the need to hide all these forms and I ended up with blank forms, etc.Even so, the total sometimes appear and sometimes it does not. so it is very unstable.
I have a form "NewMetalF" that has three combo boxes. The first one is used to choose "Precious Metal" or "Base Metal". The second one shows all the metals based on the first combo box. When I open the form in form view alone the combo boxes work flawlessly. I run the form "NewMetalF" within another form "NewExternalPartF" by clicking a button "AddMetal". When the button is clicked "NewMetalF" opens. The first combo box is selected, and when the second combo box is clicked the error "Enter Paramater Value" "Forms!NewMetalF!cboPreciousOrBase".
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
I am creating a simple data entry form wherein the user will enter the product id and on change the product description and retail price must be displayed.
When the order quantity is entered, the total cost need to be calculated. I am able to do this using DLookUp and simple multiplication.
However, after doing the above, I need another row to appear so that I can accomplish the same for another product.
I am developing a small database for use in a multi-user environment: I have split the tables off and am testing with two copies of the front-end on different machines. All seems to work well except on one form.
On this form, the value of a bound control (exposed as a number of radio buttons) is used to make related controls on the form visible or invisible. I use the AfterUpdate event to trigger appropriate VBA code to accomplish this; it works well.
However if two users have the same form open at the same record (unlikely, but not impossible), and User A changes the value of the control via the radio buttons, Access will eventually propagate the change to User B's copy of the form but the AfterUpdate event will not be triggered and the form becomes inconsistent. I understand that events are only triggered when a user makes a change to a control; how can I be alerted when Access makes a change?
I have an access form with tab control pages each with embedded forms.In one page I have a list of records as a datasheet form with the record identifier field configured as a hyperlink. When I click on this it passes its value to a form field in the form in the following tab page (works without the hyperlink but its a useful way of highlighting which field to click) which is a display/edit form of the details of the individual record. The Subroutine which does this sets the focus on this field it is passing the value to on the other form and the 'On Got Focus' event in that triggers the query that fills the editor form.
When I click back on the following tab to select another record to view/edit, the identifier value of the other record is passed to the other form but the data displayed in the rest form doesn't change. I understand this is because the field with the 'On Got Focus' never lost focus and so the query function was not called. To correct this I tried adding the same function call to the 'On Change' event however this does not work (the field is a text box set to 'locked' if that is relevant).I can get the form to do a new query properly if I click on a different field in the form before going back to the list tab or (as this is removing the focus allowing the On Got Focus to work again) if I click on a button to select a different record (which just takes me back to the list form).
Is there any way I can get this to work without having to manually remove the focus from the problem field? I have tried setting its On Got Focus event to move the focus to another field after the query function call however this prevents the Setfocus line in the code in the previous form from working. Here is a snippet of my code below.This code is for the list form and passes a value to the editing form: