Hi, I would like to change the properties of either the column heads in a combo-box or the column names for tables. I don't think there's any way to adjust the column head properties, and I'm doubtful there's a way to change the column caption properties.
Some of my column titles are long, and I'd like to be able to word wrap them essentially. Anyone know if this is possible? Thanks.
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
hello,
I wanted to know how to copy a column and it's properties by programming (VBA-SQL).
I have a column that has a list of values, and want to duplicate it (with another name).The new column should have the same list of values.
thanks for reading.
Seiky
hello,
I wanted to know how to copy a column and it's properties by programming (VBA-SQL).
I have a column that has a list of values, and want to duplicate it (with another name).The new column should have the same list of values.
thanks for reading.
Seiky
I am creating a temp table using the following code:
Code:Dim cat as ADOX.Catalog Dim tbl as ADOX.Table Set cat = New ADOX.Catalog cat.ActiveConnection = CurrentProject.Connection Set tbl = New ADOX.TableWith tbl.Name = "tblContactsTemp".ParentCatalog = cat.Columns.Append "CustomerID", adInteger.Columns.Append "LastName", adWChar, 50End With cat.Tables.Append tbl
This creates the table almost exactly as I want it. The problem is that this creates all columns as required. I have read through all the Microsoft Knowledge Base items about ADOX that I can find, and I have not discovered how to set a columns properties to NOT Required. Does anyone have experience with how to change the properties for this?
I have been able to change one property, the AutoIncrement, on integer types, using:Code:.Columns("CustomerID").Properties("AutoIncrement") = Trueincluded after that column's append in the example above, but attempting something similar with
Code:.Columns("LastName").Properties("Required") = Falsedoes not work.
Any help much appreciated!!!
Thanks,
John
I have a lookup colum in my datasheet. Is there any way that i can change the properties so that I can view both the first name and the last name in the same box once it is chosen. Currently in design view I have a column for first name and a column for the last name. When I choose a name from the lookup column, all it shows is the last name... i would like for it to show both the lastname, firstname.
please advise... thanks
Ive got 4 tables with on field name MO_ID that is formatted as a number. I then have a make table/append query that takes these 4 tables and puts them all into one table. At this step, I need to convert the field MO_ID to being a text field so that I can use an update query to change some special scan codes into word equivalents. For example, 100066 is getting updated to "Admin".
The simple solution would seem to be to change the the original 4 table fields to a text, but that wont work in this case. I have several other queries that need to have relational properties with other tables that comparing numbers to numbers so that wont work.
Is there a way to make that field change to a text field? But only when I run a certain query and only in that one table?
:rolleyes: hi
i am raza. i am facing a problem while accessing the properties page of access table.
when i gets its properties page it has no properties on it.i have attached the pic wich can explain the problem.
pls tell me if any body can solve this problem.
thanks.
raza
Is it possible to change the properties of a linked table from Number to Text and have this remain constant using VB code. If so, how can I do this?
View 1 Replies View Relatedis there is an easy way to create a table with defined field properties.
I have an excel file with over 300 column names and there field length.
I can import the name by transposing the list and then importing however the field length will have to manually edited which i don't fancy doing,
any ideas???
Field NameLength
BATCH NBR5
BATCH DATE8
BATCH CODE3
SUB PRODUCT3
FILE TYPE1
Is there a way to write the properties of a table out to a text file or excel sheet?
I'd like to be able to get the Field Name, Data Type, Field Size, and format for each field in my table.
Thanks,
CRhodus
Hi
I have a table that when imported from an external program (sage) has a number based property.
To achieve linkage with other tables, I have to manually change the field fom a number to text.
Is this possible to achieve programmatically.
Much appreciated on any advise.
Regards
Paul
I have a database created that imports data (stock levels) from a text file into a table and then email various suppliers with the current stock levels. The emails are all scheduled using scripts.
The weakest part of my set up is the text file, I am depending on someone remembering to run the report to create the text file, which cannot be automated.
I was thinking, if I could display the date the table was created in the report, I could add some disclaimer to make sure the created date equal report date. Is it possible to show the table properties date in a report?
Hi
I know this is probably a silly question but I had a number of checkboxes in a table and had set their default value to be 0 however I did not do this in the table properties of these fields.
I can understand some things like formatting dates in a form but storing it differently in the table but why did access not automatically input 0s in all the fields where I did not check the box?
Is there a way to gain access to the Field Properties using VBA?
I'm trying to loop thru the Tables in a database and find out the Fields that are indexed in each table.
I can loop through the table Defs to get each table name and a list of Fields but I can't seems to get to the Field Properties, namely "INDEXED".
I am making a new Record in the design view of a table (creating a new field in the table), and I am assigning it a date type, is there a hotkey that will select the field properties sheet so that I can select the format of the field without having to move my mouse?
View 1 Replies View RelatedHi,
I have created a sub form and wanted to make it's background transparent and also be able to enter new data and change it on the form. I sat Data entry = Yes, but I still can't enter any data. And I can't find the Back Style property at all.
Any help how to do that will be very much appreciated.
B
I was doing my assignment with the table in access, and my sister came up to me and ask me “why it is important to check the properties of each field in a table before developing a form based on that table.” Can anyone help me and answer this, because I don’t know how to answer her question.:confused: :confused::confused:
View 1 Replies View RelatedAm sure this is an easy question but I'm missing something:
How in the heck are you supposed to get to the subform properties box. The only way I know is to click on the very thin border area surrounding the form and then try and right click your way to properties. There has to be an easier way. Usually I have to fight my way to the properties box as the area loses focus by the time I right click and I have to reselect and try and right click again...ARGH!
hi all,
i m referencing a control like me!<controlname> in my code.
but in 1 screen its not giving me option after me!<ctrlname>.(only value property).
but in other screen i m able to access the properties.
So what could be the reason for this.I particularly want to access the enabled property to set it dynamically.
Thanks
How could I implement a feature which determines if something is at least 7 days before a booking at a theatre, but no more than 2 months. For example, something like... If =Now() - 7 Then... Elseif =Now() Then...
I don't really know how to go about it.
Hirer Date is when the booking is to be held (e.g., 12/01/2006) and Booking ID is when it was booked over the phone. (121205/M = 12/12/05 in the Morning) If someone could help me I'd appreciate it greatly. :D
Hi everybody!
Is it possible to set the properties for an access database not to confirm the changes when running an update query. I have done it under tools/properties etc. but then I make it in access in general. I want it to apply on one singel access database.
Anyone?
eroness
Hi there
I have a listbox and all is well - the only problem is that the column heads are a little 'ugly' - my column names are usually something like 'catagoryName', 'productType' and 'price' instead of looking pretty, like 'Catagory Name' and 'Product Type' and 'Price' respectively.
Is there any way to edit/format the title/column heads without having to change all the tables and queries etc, so they look a littler prettier?
Many thanks
Edd
ciao people
i've been looking around for days, hope u can solve my problem!
my form is made up of several combo boxes
i wanna write a code which after a selection in any combo box sets the properties of the latter as follow: enabled NO and locked YES (just the opposite of the default value)
can u please help me?
ciao people
i've been looking around for days, hope u can solve my problem!
my form is made up of several combo boxes
i wanna write a code which after a selection in any combo box sets the properties of the latter as follow: enabled NO and locked YES (just the opposite of the default value)
can u please help me?
Ok, Let's say I go into File->Database Properties from the "main" Access screen. This brings up a window with the title "<database name> Properties" where <database name> is the same as currentproject.name.
This window has several tabs including "Summary" and "Custom." It looks like this should be stuff that I can set and then reference from within my code.
My thought is that I can use the "Title" from the "Summary" screen as a variable for all of my msgbox titles. The other interesting one is "Project" on the "Custom" tab. It looks like this may be the same sort of thing.
I've found that the Access Help is absolutely useless - I'm about ready to take a shotgun to "Clippy." But as they say, a display is a terrible thing to waste <grin>. I've also found that it's getting harder and harder to find what I'm looking for in the MSDN library. There's so much stuff and they don't always file it in logical places.
Well, thanks for reading.. sorry for the rant. As usual, any help is appreciated!
Cheers!