As you can see a table can be linked to any number of tables.
Now for my actual question. I don't want to have to type in all the queries and tables. I would like to choose any query and table from a drop down of all possible queries and tables that are currently in the database - like a list, where the list contains all the possible values.
I have a drop down list where you pick from 6 recruiters. i put it on my candidates from and when yiou change a recruiter on one candidate then all the candidates get changed to that recruiter. Any ideas what i did wrong?
I have a field in which I wish to post several contacts. The contacts are listed in a table and populate the specific field via a drop down. In this specific field I want to select "mary" "bob" and "fred" (all three to display) however only one is displayed.....
I have a database that is split - one central PC holds the back end, and then there are multiple end users with a copy each of the front end.We have updated a drop down menu on a field in the back end to add some new entries, but this is not showing up on the front end copies.Is there an easy way of updating the front end to show the changes?
I have a table called Stock Levels which contains 3 fields. (ID, ProductID, StockLevel) ID is the Pkey, ProductID contains duplicates and StockLevel which contains different stock levels
and I am trying to remove the duplicates and retain the the data so I am left with the correct stock number
what I have done is the following, but I am still getting duplicate values in productid and stocklevels
SELECT DISTINCTROW id, productid, stocklevel into mynewtable from stocklevels
im in the middle of developing a database to log DOWNTIME of various machines in the factory. Basically myself and others will use it to log breakdown details and the amount of time (in HH:MM) the machine was off.
I have a form which will list details of a certain machine in a list box which i can populate using a query.
The list box will display 3 columns: Date of Breakdown, Machine Name and Downtime
I then have a text box below this that i would like to display the TOTAL amount of downtime for that machine (The listbox may have different information in it depending on the query criteria, e.g. It might display a certain month for a certain machine).
THE ISSUE i am having is its proving to be difficult to get the correct sum of the accumulative time to display correctly in the text box.
Is there a way i can use a query to calculate the total time of a column and return a value which is formatted as time (like this hhhh:mm or dd:hh:mm) or preferably use some VBA code on the form itself to total up the DOWNTIME column of the list box and display it with the correct format in the text
I have gotten close, but as the total amount of time exceeded 24 hours, it went past 00:00. I'm assuming it treated it as a clock and went into the next day? This is NOT what i am after, i need the total amount of days, hours spent on the machine and not a time of the day.
tblEmployees - Stores employee data tblProcess - Stores process data tblTraining - Stores data on which employees have trained on which process
tblEmployees has a 1 to many relationship to tblTraining through empID tblProcess has a 1 to many relationship to tblTraining through pcsID
When a new Process is added, a query auto populates tblTraining with 1 record for each employee in tblEmployees. Equally when a new Employee is added, a query auto populates tblTraining with 1 record for each Process in tblProcess.
In theory this should ensure that every employee has a training record for every process (and vice versa). However, as many of us know, never assume the user wont find a way to mess things up!
So i want to have a query that can show me Employee and Process without a training record. I have been manipulating a SELECT (SELECT) query to pull this together, but i just keep coming up blank.
I have attached a copy of the relevant tables and query. I have deliberately deleted a training record for empID 6 on pcsID 1 AND empID102 on pcsID 2 (qryCheckTrainingRecordsBalance will show the processes these 2 DO have a training record for).
I have a Membership List Table with a calculated field entitled Member Name.
The second table entitled Groups contains only 46 records each of which has up to 30 Fields also containing member names.
I Have written a query to establish which of the members from the single field of the first table do NOT featured in any of the fields and records of the second table. In the Query Design View I have listed 'Member name' from Table 1 followed by all the relevant member fields from Table 2, carrying the criteria 'Is Null'.
When I run the query, it merely lists all the members from Table 1.
Is it possible to sort a natural table drop down by date from within a query? What im doing:
1. making a query that has certain results displayed 2. within the query you can select one of the field boxes and it has a list of all the items in that table. 3. is it possible to sort this natural table listing from within the query. I have attached a screenshot. Same thing happens with the client ID listing from within the query. Want to know if it is possible or not to sort those. I cant see how.
Is there a way in which someone can select a table from a drop down list and then search that table for a record then move that record to another table.
For example.
User selects 'Mikey's_table' searchs for a record then move this selected record to 'Mandy's_table'
(all the tables have the same structure etc. identical apart from the name of the table and records within)
I have the list of tables that all the records will be on and the users will know which table the record is in, i basically need to know if there is an ability to search for a record over multiple tables then edit that record and move it to another Table.
I have tried to use a Union Query which works when searching but i cannot edit or move the record ...
I've got a table tblPatienten, a table tblRechnung and a form frmRechnung.
The primary key in tblPatienten is KundenNummer, the primary key in tblRechnung is RechnungsNummer. The relationship between tblPatienten and tblRechnung is one to many.
Now, every patient (stored in tblPatienten) is allowed to make multiple orders (stored in tblRechnung).
How can I assign each new order entry in frmRechnung to an existing patient in tblPatienten?
I Have A Query Where There Is An Input Box For Example What Region Do You Want The Query To Run On And Instead Of Typing It In I Would Like To Know If It Is Possible To Have A Drop Down Menu Of Possible Selections
I have a tblhealthrecord that has many multiple entries for the same animalID. Would like to pull up all records from this tbl for one animal. I can sort them later but just need to know what to ask for so I can read upon them. I at first thought this could be based on date but not really since you could have multiple entries in one day.
I have a query result-set with several columns: A, B, C ,D. All Four of these columns display numbers. From this query, which I will call the "SetUp"query, I want to query it and obtain the average for each of the columns A, B , C ,D. However, some of the values in columns A, B , C ,D are zero. If I use the standard 'Avg' function in Access, it averages the column AND INCLUDES THE ZEROS IN THE AVERAGE. How can I get an average of just all the non-zero entries?
I have a query that feeds a report. This report shows a "Set" and the "Charge Numbers" associated with it. Each set could have a possibility of more than one set of IT numbers. This means there could be say 2 entries for set "D7" and IT numbers for both of them.
As a result when I run the query, and say the set has 2 Charge numbers, it will bring back 2 results, with 2 charge numbers on each of them, which is correct. So if a set had 4 charge numbers assigned to it, 4 results would show with 4 charge numbers for each result.
Is there any way I can make it only show one of those results as they are identical?
I'm trying to use access to identify how many times an indiviual appears in my database. I've got a large file which gives me all referrals, each referral comes with two identifiers, one unique to the person, another unique to the referral. This means that the person unique number may be repeated multiple times (if a person has more than one referral) but the referral number would be different each time.
I've run a query to identify the duplicates, i.e. the records where the person unique identifier is repeated. What I am trying to do is work out now how many people have been referred twice, how many three times etc. The original query looks something like this (but on a much bigger scale).
Person Referral 1 A 1 B 1 C 2 D 2 E 3 F 3 G 3 H
What I'm after is a query that will tell me that two people were referred three times (1 and 3) and that one was referred twice (2) and so on.
I have a form that feeds information to a query which in turn sets up a report. For clarity i will list out in basic terms what I have
Input Form - Check Box to activate/De-activate a text field [chk-active] - Text field for a parameter [txt-Parameter]
the query has a column that has null values from the originating table. These values will be added a t a later date, but need to be queried and reported at some business intervals.
In the query criteria for this column, I have the following Criteria
Like IIF([Forms]![ReportGenerator]![chk-Active]=0, "*", [Forms]![ReportGenerator]![txt-Parameter])[/I][/I]
I have tried for the last 5 hours to figure out how to write the formula to be able to get the blank entries to show up as well but have had no luck.
I have a large table with millions of entries. I want to run a query to return all entries that are on a Saturday. The date stored in the table though is just typical date format eg 15/11/2015.
Is there any way user can verify the data that its enter correctly, for example I want a button on user form, after every 14 entries when user hit that button it bring the sum of 14 entries.
In my table I have the following fields that are tick boxes
Vee Cathedral Round Bilge Bilge Keel RIB Semi-Displacement Keel Lifting Keel
Each record can take a couple of these options. For example record 1 could be ticked for a 'vee' and a 'cathedral' whereas record 2 could be ticked for all of them.
I have been trying to use these to make a search form. I want to be able to chose on ie. 'Round Bilge' and it will search for a record that is ticked 'round bilge'. I have done this for both a combo box and a list box and have used the formula for each field [Forms]![Boatsearch]![hulltype]
When I have clicked run query I have an error message saying: 'This expression is typed incorrectly, or it is too complex to be evaluated. For example a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables'.
Both have the same source list but I would like the ref 1 list to exclude ref 2 and the ref 2 list to exclude ref 1 but I am struggling when either value is Null gives me no list.
Ref 1 row source
SELECT [Reference Probes].Ref, IIf([Forms]![frmCalibration]![Ref 2]=Null,([Reference Probes].[Ref]) Is Not Null,[Reference Probes].[Ref]) AS Expr1 FROM [Reference Probes] WHERE (((IIf([Forms]![frmCalibration]![Ref 2]=Null,([Reference Probes].[Ref]) Is Not Null,[Reference Probes].[Ref]))<>[Forms]![frmCalibration]![Ref 2]));
Ref 2 row source
SELECT [Reference Probes].Ref FROM [Reference Probes] WHERE ((IIf([Forms]![frmCalibration]![Ref 1]=Null,([Reference Probes].Ref) Is Not Null,[Reference Probes].[Ref])<>[Forms]![frmCalibration]![Ref 1]));
Ref 1 after update has Me.Ref_2.Requery Ref 2 after update has Me.Ref_1.Requery
As you can see I have tried two different ways but both don't work.
