Table Field Properties - Bound Column Only Accept Numeric Value?
Oct 22, 2014
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
Hi, I would like to change the properties of either the column heads in a combo-box or the column names for tables. I don't think there's any way to adjust the column head properties, and I'm doubtful there's a way to change the column caption properties.
Some of my column titles are long, and I'd like to be able to word wrap them essentially. Anyone know if this is possible? Thanks.
I have several combo box fields in a bound form where they are selecting values from a list (values stored in a separate table) and then loading a number into the bound table field when selected.
How can I put a text prompt in these fields when loading the form which gets removed when focused and of course is not permitted to attempt a save into the bound numeric fields? I've done quite a bit of searching but can only find materials about doing this on bound text fields. I've also seen solutions using Nz which don't seem to work.
I've created a listbox and am using the following code
stWhat1 = "": stCriteria1 = "," For Each vItm1 In Me!LstArchive.ItemsSelected stWhat1 = stWhat1 & Me![LstArchive].Column(0, vItm1) stWhat1 = stWhat1 & stCriteria1 Next vItm1 Me!txtCriteria1 = CStr(Left$(stWhat1, Len(stWhat1) - Len(stCriteria1)))
The problem is that my bound column is a text field. I'm really struggling on where to put my quotations so that I get the following with the In function In('00638','00639').
Any help or pointing in right direction would be very much appreciated Carrie
I'm using Access 2007. I've created a table with two fields. "Novice and Recertification" as in combo box.
I put it on the form. Now the idea is when a user clicks Recertification, it shows up on the report. When the user clicks on Novice, it should be empty on report (Reason why I want to keep novice is so that we have a record of it.)
Now the challenge is I added another column, empty field for Novice and Recertification for Recertification. Thing is if I set the bound column, I select on an empty field on form and it will be empty on report. But I want the user to see Novice on the form and it must not show on the report.
Access 2010. The first table is called Clients.The Primary Key field for the Clients table is an AutoNumber field called ClientID.The other two relevant fields in this table are ClientFirstName and ClientLastName. The second table is called Contacts.In the Contacts table is a foreign key field, bound to the ClientID field from the Clients table, and also named ClientID.
On the Contacts table, the ClientID field properties are set on the Lookup tab as follows:
Further, in the Row Source's Query Builder, ClientFirstName and Client LastName both have Ascending selected as Sort criteria.
Everything works as intended: When entering data into the the Contacts table (actually, the data is entered via a form built from the Contacts table) the data entry person can click the drop-down on the combo box for the ClientID field, scroll through ClientID records, and see unique ID numbers sorted by first and last names. And the actual data for the field is stored properly as the unique ClientID number.
When entering ClientID data into the Contacts table (or form), is it possible to enable autofill based on ClientFirstName and ClientLastName, rather than ClientID? For instance, let's say we have a few clients named Joe Smith. It would be great to just start typing "Joe Smith," and have the field autofill the ClientID number for the first client named Joe Smith. The intention is to make data entry a bit quicker.
I am making a new Record in the design view of a table (creating a new field in the table), and I am assigning it a date type, is there a hotkey that will select the field properties sheet so that I can select the format of the field without having to move my mouse?
I have a numeric field (long integer) in a table. I've set the format to fixed. No matter what I set the decimal places to, auto, 0 or 2, when I enter a value of 0.71, it displays as 1.00
In my form, I've also set the field property to fixed, but it displays the value as 1.
hello, I wanted to know how to copy a column and it's properties by programming (VBA-SQL). I have a column that has a list of values, and want to duplicate it (with another name).The new column should have the same list of values.
hello, I wanted to know how to copy a column and it's properties by programming (VBA-SQL). I have a column that has a list of values, and want to duplicate it (with another name).The new column should have the same list of values.
I am creating a temp table using the following code:
Code:Dim cat as ADOX.Catalog Dim tbl as ADOX.Table Set cat = New ADOX.Catalog cat.ActiveConnection = CurrentProject.Connection Set tbl = New ADOX.TableWith tbl.Name = "tblContactsTemp".ParentCatalog = cat.Columns.Append "CustomerID", adInteger.Columns.Append "LastName", adWChar, 50End With cat.Tables.Append tbl
This creates the table almost exactly as I want it. The problem is that this creates all columns as required. I have read through all the Microsoft Knowledge Base items about ADOX that I can find, and I have not discovered how to set a columns properties to NOT Required. Does anyone have experience with how to change the properties for this?
I have been able to change one property, the AutoIncrement, on integer types, using:Code:.Columns("CustomerID").Properties("AutoIncrement") = Trueincluded after that column's append in the example above, but attempting something similar with Code:.Columns("LastName").Properties("Required") = Falsedoes not work.
I have a combo box that has two columns, the second one is bound.
Is there any way to reference the 1st column (the unbound one).
What I actually want to do is have the 1st column show up as a status line message or as a quick help message when the combo text is mouse_overed. The problem is the combo box field is a date that is unique 99 % of the time but in that one percent the user needs to see the beginning of the 2nd column ( think of a persons doctors appointments, where one percent of the time a individual needs to visit the same doctor twice in one day , in which case the procedure and the date becomes the selection criteria (but I don't want to show the procedure and the date in the combo box because the procedure is so darn long.)
I have a combo box that has 3 columns. What I am trying to do is get the third column to be passed as the value to another textbox after the combo box is selected.
combo box sample data: Male/John/NY the 3rd Column which is state I would like to have it sent to the State Field...
I'm looking for a work around for getting the bound column setting for a combo box to work. I created a simple table with 2 fields that i have a combo box pointed to. My settings for the combo box are
Column count 2 Bound column 2
The first field is "Description" The 2nd field is "ID"
I cannot figure out how to have column 2 to be the value that is left in the combo box once I have made my selection.
There are 3 column in a combo box, ID is bound column
Part no ID Description 0040 1 class 40-1 0040 2 class 40-2 0040 3 class 40-3 0041 4 class 41-1 0042 5 0042 6
When key in part no 0040, 3 rows under 0040 will be listed out only, filter and match as value entered only. do not show others part no in the combo box selection.
Ok....Just when you think it's all running smoothly.... :( I have a combo box, MDLastName, with a column count of 9, with column 2 displaying and all others hidden. The selection made with this combo populates 7 corresponding fields (first name, address, etc). It's working perfectly.
The first problem I encountered was with identical last names, but different corresponding data. When I selected Jones, for example, it would populate the first Dr. Jones and his info, listed in the table. However, if I selected the second Dr. Jones in the combo list, it was still populating only the first Dr. Jones' info. I resolved this by binding the fist column (ID, aka primary key), but still hiding all colums but column 2. First problem fixed..
Next, I have a Word Template document bookmarked to receive data from the form, frmDenial. I have all the coding working fine and dandy to insert the data from the fields on the form, save, and print. However, instead of inserting the text from the MDLastName, it is inserting the primary key (because it is the bound column in the combo box). Now, because of the first problem discussed above, I cannot change the bound column to column 2 (containing the data I need in the Word Template). How can I get the right info to appear in my template with the bookmarks?
I have two listboxes. One for Activities and the other for Organizations.
I set the Org listbox to be multi-select so I could run a loop on that listbox to join multiple Orgs to a single Activity. That part works well.
To do so, I am using the bound column (which is the pkey value) from the multi select listbox, and on the single select listbox I'm using the ListboxName.value to gather the pkey for the "1" side of this 1:Many series of inserts.
Now... I want to use one of the other-than-bound-column value from the multi-select listbox, but I don't know how. When setting a value I only know of the use of :
yes, I just made that up, but I hope you get the point. Meaning, as the loop cruises the ItemsSelected on the multiselect I'd like to use other than the bound column when setting variables.
I've tried using the column property to then cruise to the proper record in the listbox, e.g. :
But this seems to return the column(2) value of the first record loaded into the list box, as if the varItem piece is being ignored. I believe the loop is working properly, as when the inserts are happening correctly with the bound column of the multi-select list is correctly present as an Fkey in the resulting child records.
I just can't get any other column's value for some reason.
Field 1: Group Text field ( Primary key) Field 2: Group Description Text field Field 3: Uidgroup( Autonumber)
Table 2: Subgroup Text field
Field 1: Group ( I want to bound this column to Table 1's Group field that is column 1) I have set bound column property to 1 and column count 1 and the Subgroup table is showing group fields as input perfectly no issues in that )
Field 2: Subgroup, Text field( Primary Key )
Field 3: uidsubg( Autonumber)
Table 3: Email
Field 1: Group ( Bound to Table1's Group ; showing values in combo box, setted bound column property to 1 and showing group field perfectly, no issue in that )
Field 2: Subgroup (I want to bound Table2's subgroup field, which is column number 2, so I wrote 2 in bound column property and row source is table subgroup ; Here is some error comes up, values from subgroup field of subgroup table not being shown up in Email Table's subgroup field as combo box. )
Field 3: Email Text field
Field 4: uideml (Autonumber ) primary key
I want to prepare a Data entry form should have all these fields from all the tables. That should work in following way, first user selects Group then User selects Sub Group and write Email and save the record.
What relationship should I set, or shall I change the table structure.
In my form my combo box displays a list from a query called DORP-HDR that has 3 columns
DORP-ID | CODE | NAME
and displays them like that is the drop down list
The form field that the combo is bound to takes the numeric-id field as its value. In the combo control wizard i nominated that value, and in the properties pane bound column value is 1.
and in the properties pane the row source is:
SELECT [DORP HDR].[DORP-ID], [DORP HDR].[CODE], [DORP HDR].[NAME] FROM [DORP HDR] ORDER BY [NAME];
So far so good. I have created lots of combo boxes before like this.
But this time i want the second field in the list (CODE) ALSO bound to another field in my form . So I want the combo to transfer two values not one. How do i do this?