I have some tables in many .mdb that I will like add or subtract fields. I will like to use VBA to do the job without using Access.03 interface.
I do remember using TableDefs object & the functions .Delete & .Append - That is right way to go is it not??
I am a beginner in access and I want to populate a new field (REPUN_1 which corresponds to SEGMT_ID in the other table) in my table and this field is coming from another table. The values of the fields need to correspond to the row of my actual table (JMTable) having the same CO_ID, MOVEPLANCD and TTY_NO as the table I want to extract the values from (DI_Treaty_Crosswalk).
Here is my query:
UPDATE JMTable SET [REPUN_1] = DI_Treaty_Crosswalk.SEGMT_ID WHERE JMTable.TTY_NO = DI_Treaty_Crosswalk.TTY_NO AND JMTable.CO_ID = DI_Treaty_Crosswalk.CO_ID AND JMTable.MOVEPLANCD = DI_Treaty_Crosswalk.MOVE_PLAN_CD
and it doesn't work since access ask me to enter a parameter value.
I reached the limit of 255 fields in a table. I just need to add one more field so I deleted several fields I no longer needed thinking I would then be able to add one more new field. However, I am still unable to add one more field. How to free up fields that are no longer needed?
View 8 Replies View RelatedI have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code:
SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay
FROM [Tble-wcDelays]
GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID
HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
That is the query.
hi all
i can do simple additions in access but i have been asked to calculate fields in different tables
all i need to do is
i have 2 tables in my database
Table 1:main_database
Table 2:Security 2_3
and i have in table 1 got 1 field called Estimated security value
and in table 2 i have 2 fields called Sec 2 estimated value and Sec 3 estimated value
all i need to do is add all of the fields together in query or field in a form
i have tried =([Estimated security value]+[Security 2 & 3]![Sec 2 estimated value])+[Security 2 & 3]![Sec 3 estimated value]
but i get '#name error
thanks in advance
chris
I have created my tables, relationships and I have gotten halfway through my forms and I have realised that I have missed out a field in a table.
How can I go back and change this without screwing everything up (I believe that would be the best terminology to discribe an error :))?
Thanks :D
I created a form from the wizard. In the wizard, I added fields from two tables. Now, after the form is complete (and I've edited it in Design view so that it looks how I want it), I want to add another field from a third table.
Although I can add fields from the first two tables that were originally included (by clicking on the "Field List" icon and dragging fields from that list), I can't find a way to add fields from any other tables in my database. The "Field List" dialog box doesn't contain any fields from anything but the first two tables.
How to I get fields from other tables into the "Field List" dialog box?
Thanks,
Kelly
Is there a way to add fields to template tables/forms? The table will only show in datasheet view; design view isn't an option...
View 1 Replies View RelatedI am creating a table in access 2010 for my consumable and bench stock report. I made a 12 fields which I name it the month of the year and another 1 field to add the total disburse materials in one whole year. I did this formula to add the 12 fields
[Jan]+[Feb]+[Mar]+[Apr]+[May]+[Jun]+[Jul]+[Aug]+[Sept]+[Oct]+[Nov]+[Dec].
But the problem is its just adding the complete consecutive months that I disburse and the row with blank section the total disburse doesn't show on the total disburse for the whole year. I try to use the code =Nz([Total Disburse],0) but it shows on the screen i cannot be used in calculated column.
Hi,
My database has 4 tables. Table 1 is assembly line 1 data. Table 2 is the sizes for assembly line 1. Table 3 is assembly line 3 data. Table 4 is the sizes for assembly line 2.
The table data comes from another program - they are reimported regularly and so I cannot change, add or delete fields from these 4 tables.
I have to change tables 2 and 4 to crosstab queries and then create 2 queries that join 1+2, 3+4. That's easy enough, no problem.
But then I have to UNION queries 1+2. While 95% of the fields are the same, the most crucial are not - the sizes. Assembly line 1 has 5 less sizes than assembly line 2. I need ALL of the sizes to show in the combined query.
I need to add these 5 fields without adding them to the tables. I did manage to create a crosstab query that included the missing sizes, but now I have a 1 in those fields where I need a NULL or Zero value.
Does that make sense? Can anybody help me?
Thanks in advance.
Rhet
I have 2 fields in a table 1. called CommAmtDue and the other called CommAmtPd, When the user inputs a value in the CommAmtPd I want the CommAmtDue - CommAmtPd = CommAmtBal
I want this value to be stored in another field in the same table called CommAmtBal
I can do the formula in a query but how can I get the value to be stored in the field to user for later.
Thanks
This is going to sound like a bizarre question, but, here it goes. Is there a way to add more than 255 fields to a table? Or is 255 the cutoff? Also, if you have two table with different information on one client, is there a way to add a client to one table and have it automatically add it to the second? Sorry about all of the wierd questions. Let me know if you know anything.
View 3 Replies View RelatedHi there
I am completely new to access so if this question seems really simple then i apologise. If this has appeared elsewhere on this forum i apologise again!
Can you tell me if the following is possible
I have a table called AA1 containing the following fields:
(PKey)Refno
StudentNo
PC1
PC2
PC3
PC4
PC5
PC6
Range1a
Range1b
What i would like to do is create another two fields called PC total and Range total whereby i create a formula that will add the totals of the PCs for each student )which will then be entered into the PC total column and the same for the ranges.
I am unable to do it using the query function as i have over 225 diffrerent fields overall so i thought if i could create a totals field i could use these for my queries therefore negating the need to include all the seperate fieids, pc1 pc2 pc3 etc...
the above fields are all in number format.
I have probably not explained myself very well and if you need any more information (im guessing yes) then please let me know.
thanks in advance
Jemma
Probably simple, but I cannot see how I add fields from different tables to a form that has already been designed. I can see how I achieve this when designing from scratch.
Thank you
If I have a make table query where I want to add in some blank fields, say: Field1: “” , Field2: “”, etc…. is there a way I can make these fields a yes/no type instead of the default text?
I know I can manually go into the table in design view after I run the query, but I was hoping I could do it beforehand. :)
Thanks!
Hello: Is there (simple) way that I can populate a field based on the values of two other fields? For example, in a list of new employees, if a new employee starts on Nov 30 and works in the Administration Department, his human resources contact is Mary. If a new employee starts on Nov 30 and works in Sales, his contact would be Fred. I hope this is clear! Many thanks!
View 12 Replies View RelatedI have a form which I've spend many hours designing to look and behave as I need it. It is bound to a table (get's it's data from there). I now want to add one or more new fields to the table (which I've done ok), but I can't seem to get the Form to see those fields. I've tried creating new controls on the form and the control source list to select from doesn't include my new fields.
Even if I write VB code embedded in the form to refer to the fields, the debugger trips on the field names saying no such method/object. The only way around it I've discovered is to create a new bound form which will mean re-dooing al the layout work again.
Surely this is a common situation which has an easy solution ?!!
I've got a fields called rev code that contain the following values:
field name: 110 131 250 255 258
field value: 7.49 6 11.25 12.11 78
I'm writing a query that pulls from the first two digits of the rev code and need to round off to the nearest dollar so in my query I'll have a column 11 with a value of 7, a column 13 with a value of 6, then I need to take columns 250 255 and 255 add the values together and round off so I get a column 25 with a value of 101.
How do I do that?
I decide to add a new field to its related table. I always wait to create the form until I think my table is complete, but sometimes I just end up needing to add more info. Is there a quick way to update the form to include my new fields?
View 7 Replies View RelatedI want to add three fields in a table namely from, to and diff .
How to add them in a form so that I can enter
The time in (xx:xx) 24hr format in the "from" and "to" fields and calculate and save the time difference in minutes to the "diff" field automatically.
I am using access 2010.
I am building a DB for my college, it is needed to replace a spreadsheet they have in place. The spreadsheet is used to monitor and track Students grades.
Each unit a student passes gives that student a certain number of points, the number of points depends on the grade (e.g. a student will get more points for a B than they would for a C). The point of the DB is to input all the students grades so that student can see how many points they have.
I was wondering if there is a way to add a value to a field, so if I put in a field that a student got a B grade the database would know how much a B grade is worth points wise. Each field should be added together to generate an overall score. Is this possible?
I have a invoice system I have created in Access and it did used to work perfectly and then maybe an update Who knows stopped the system working.
I have an customer order screen that has customer details and then a subform within the same form this takes a total of items & costs for this order and then it entered it into the customers table from the order_Details table using me.Order_total = Order_Total.
I know this is bad design but I store it because once the order is places I need the total to be static because the invoice has been sent and so if someone changes the order then the total owed doesn't change.
I then have a reconcile form which is on a datasheet form straight from the tab;e so it is editable which has a checkbox that then once ticked copies the total from the Order_Total in the table to the reconciled field in the same table and then I use a report to show who owes me still.
So I have made a Select query from the Orders table & Order_Details table and used a Group by Order number (Which is the link between the 2 tables) this shows correctly but now not editable because of the rules So I am trying to add an editable checkbox on the same form.
I tried to use a dlookup makes all of the boxes either ticked or not. I've been looking at Recordsets but I'm unsure if this is what I need or not really
So really I just need to see if I should be putting the Total from the Subform into the mainform and then entering it into the table (Like previously) using a calculated unbound field and then using the Afterupdate event to insert the data into the table. but for some reason it just wont work.
I can get the OnClick to work but then as soon as i go to the next record for some reason it then resorts to 0.00 but then the table shows correctly which ever record the form is working on.
Or should I be using the new query based idea to create the reconcile form and if this is the best way I just don't now where to start on how to get a multiple table query that I can then add a reconciled checkbox which then copies the Order_Total from the table to the Paymet_Recieved field.
I am trying to add a user stamp in a table. I have seen online that perople put a macro (Before Change) in microsoft access 2010 but I dont understand how to use that.
I have seen you are suppose to do something with = Environ("username")
What I have is a database that I have done some tweaking on and in the meantime the original db has been in use which has added around 200 or so more records in the table.
What I would like to do is to just update the db that I have been working on with the older db table(the one who has the additional 200 records).
EX. DB A(Old DB, Newer Table) DB B(New DB, Older Table)
I want to put DB A table into DB B
Is this a simple fix? Or do I need to write some sort of query to update the records in the old table? I've tried to export the excel file and then import but it puts it in unrelated objects and then my switchboard or nothing works.
My database has three tables with many columns. The three tables are identical in the names of their columns.
I want to copy all columns from all three tables together into one single table, giving the respective columns prefix table1-, table2-, table3- since the columns would otherwise be indistinguishable.
I already tried to search the board for "table columns add prefix".
I use Access 2010
I managed to copy all columns together into one table through design-view, but cannot figure out the "add prefix" step.
I want to make a table where in I have to input atleast 10 numbers in one reference ID which there is a start time and end time.
A form with inputing one reference ID and then adding multiple numbers at once and saving the data with a start time and end time. Is it possible to capture the time for that specific reference ID?
How to do it or a sample tracker on measuring it.