I have split the database I have created via the splitter-wizard and found that all tables with auto-numbers have re-set back to 1.
How do I get around this problem - I have tried running an append query but it flags up an error message. For certain functions to work in the database I need to set autonumbers at different amounts .
Im trying to add 2 new tables to a split and linked database... but no matter which side i add the table to (BE or FE), it wont show up in the linked table manager.. so my question is 1.) is there some trick to getting it to show up in the link manager? or 2.) is there some way to re-merge the database, add the new tables.. and then split it again?
View 3 Replies View RelatedSo i split my database into a front and back end, now i wanted to add a table to the database. I created the table in the backend but im not sure how to make it appear in the front end. Im using access 2010. I tried the link table manager but the table i created dosent appear there.
View 2 Replies View RelatedI have a split database. I have just created anew table in the back end and created a relationship to an existing table. All done in the backend.
I have opened up my front end and imported the back end end. But when I check the relationships in front end neither the table or link is there.
Hi, all.
I have a "client/server" split Access 2003 database with an Interface file containing all the code/forms/queries and some system tables and also a Data Backend file, with all the data tables and table structure.
This is being deployed to multiple sites, each getting their own version of the backend, so sites will not be using the same backend between them all, rather multiple users in each site will all share that site's backend file.
Since users will deploy in different network locations, etc. they will have to re-link all tables. Is there a meaningful/user-friendly way of doing that without relying on user's knowledge of "Linked Table manager", etc.?
Thanks!
My db is split into front-end and back-end. In the f-e's Relationships schematic, I can see the relationships as they were defined at the time when the db was split, complete with the one-to-many symbology.
I can add a new table to the b-e and set its relationship as one-to-many, enforcing referential integrity and cascading as I wish - and the schematic (in the b-e) reflects that.
In the f-e, I can then use the <Get External Data - Access Database> function to link to the new table, and I can add the new table to the relationships diagram in the f-e. I can also drag and drop to link primary and foreign keys (within the f-e), but cannot select one-to-many. I'm OK with that, as I understand that the relationship is within the b-e, and this is just a diagrammatic representation.
But I can see the one-to-many relationships between the tables which existed when the db was split, and I would like to be able to see the new table's relationships in a consistent fashion. Updating the linked tables via the Linked Table Manager does not do the trick.
Surely I don't have to split the database again in order to achieve a consistent diagram - do I ?
Hi.
I'm about to move to a back end / front end system, from a single database file. Before I do so, I want to make sure I have all bases covered so to speak.
My back end file will reside on a server. I am aware that path names are sometimes changed by network administrators without warning.
From tests, I notice that, if the path to the back end can't be found, one cannot open the front end database file at all (Access 2003).
My question is: if my back end file gets moved, or the path changed, how can I get into my front end file to update the linked tables.
Many thanks in advance.
Mat.
I have a split database and need a field (Combo type) in the table to lookup values from a query in the front end. How do I do this as it doesn't see the querys because the front and back end are split?
View 3 Replies View RelatedHow can I reset my Tables without affecting the Relationships
ViRi
Is there any way to reset a database to have no records (start again) ?
View 1 Replies View RelatedCurrently I'm working on an invoicing database in which I can register my customers (or partners) and also make invoices and purchase orders. So far, it does exactly what I want it to do, but I'm struggling with the invoice numbers. What I want to have is that whenever I make a new record, the next invoice number in sequence is automatically assigned to it. Another desire is that this number is prefixed with the current year, and the counter should reset with every new year. So, for example:
2015001
2015002
2015003
etc.
Then
2016001
2016002
etc.
Don't worry about the maximum of 999 invoices, because I won't ever go beyond that limit.
Is there a way to reset the auto numbering? I import new data then archive the old data. As I do this weekly my auto numbers are getting high and my users do not care for this aspect
View 3 Replies View RelatedThere is a autonumber column in one table Order.Everyday I need delete records in Order and then append records into it.Doing so, autonumber keeps on increasing.Is there any way to reset Autonumber from 0 after deleting records?
View 2 Replies View RelatedI have a table which will be completely emptied and refilled. The table has a field autonumbered it is also the primary key. When the table is refilled I want this field to start from 1. How can I do that. Yes some people will say this subject has been discussed search for it. But here the issue is somewhat different we have an existing field and I do not want to compact the database each time the procedure runs.
View 1 Replies View Relatedhow to reset autonumber field.
View 6 Replies View RelatedI have created a database and made the steps to the user-level security and VBA protected the project but i lost the passwords and the MDW file.
is there any way to reset the VBA pass then reset the security level?
this is very important for my business it's a school database with lots of info and it's critical for me to update or at least export some reports and forms to a new project
So I have decided that I want my ID's to be AutoNumbers, but at the moment they are currently set as Numbers. I have already inserted data, to test, which has been deleted, however I am now unable to change the ID field back to AutoNumber.
How can I duplicate the tables so that this field can be changed again?
I have like 10 tables with heaps of feild, so remaking them will take long, but I know there is a way using queries, I am just not sure how...
I have created an Access 2000 Db, and have gone through the motions of splitting the Db via the Splitting Tool. Since I have done this split, I have added forms, queries, and reports to the Front End. I have left the Back end table structures alone.
This is where my problem comes into play. To enter data into the Db, I use the forms. After splitting the Db, I assumed that the data would be stored in the tables in the BE. An issue had just presented itself and I went into the BE table structure to add a field to a couple of the tables, and when I opened the BE table in the datasheet view, I noticed that there were no records. I then became curious because when I run my reports and queries, the information is present. So I opened the FE tables and what do you know, all the data I have input since the split is housed in the FE tables.
I already attempted to Update the Table Links, but that did not solve the problem, and the data is still in the FE.
Can someone, anyone please help or offer some suggestions on how to resolve this dilemna.
Thank you in advance,
DtF
I have access that is required to be accessed by multiple users and register their activities which is reflected with the tables in the background and form sends also the time that they are putting their activities.
So i split the tables and put them in a share folder in one of the PCs. however, the problem is about the timing and dates is not correct usually, and i found out some of the PCs their dates are not on sync. I asked and found out sometimes it is required to change the timing in their PCs.
Therefore, i was wondering instead of fetching the timing from their PCs why not to put the timing of share PC (i.e. timing/Date of the share PC which has the splitted tables)
so can i do like this:
User PC: (Form1) & user activity => Share PC: (Split table) & take time of the share
How can i do that?!
:confused: I have read a quite a few threads on spiting the database. My database is 50 Meg and running very slow. I have compacted and repair, still the same. This just happen all of sudden. Could that be possible?. What should I look out before I try to spit it?. It’s given that I will make a backup. I am running Access 2003. I have over 150 users.
View 5 Replies View RelatedI am almost at the finishing line with a great deal of help from here.
I have now normalised the tables, built complicated queries, forms, reports, all from scratch as I knew absolutely nothing before I started with Access three months ago.
I have compacted and repaired the database using the wizard, and also complied the code and analyzed all tables, forms, queries, and reports and relationships.
The final step is to make it an MDE file so that it can go on the local network at work (not on the internet).
My questions are these;
Do I need to split the database into front and back ends?
If I save a copy of the original MDB file and then make it a MDE file would that not suffice in making it run more efficiently?
Can a split MDB database be made into an MDE database?
Any advice, as always, is most welcome.
I have a database that resides on a file server share. I have split the database to create a backend. I then posted a shortcut of the front end to the desktops of two users who have access to the share. I then tried to access the front end from the two machines simultaneously. It opened on the first PC but not the second? When I viewed the server share it had a 'padlock' icon?
Where am I going wrong? This is the first time I have attempted this scenario!!
Thanks in advance,
Phil
Hello,
Should splitting only be done when all tables,queries,forms,reports, etc. are done. Or can it be done anytime. I am almost to that stage but didnt want to jump the gun and run into problems later on.
Thanks.
I will have about 20 users sharing this.
I was having a discussion with Rickster57 concerning my newly developed database, and he recommended that I split it so that it has a front end and a back end. Rick listed a number of very good reasons for doing this (so I will definitely do it). But I wanted to pose the question so I could get some of the reasons the more seasoned Access programmers have for creating a front and back end to their programs.
View 9 Replies View RelatedI recently split my database and also used Bob Larson's Autoupdating tool. Everything appeared to be working fine until a few users were unable to access the db. I later found out that because they are at a different site, they don't map to the server that houses the database BE. However, even if they manually map to the correct server, they are unable to bring up the db Form. They get an error stating the BE "...is not a valid path". My questions are:
1) If I were to copy all the files (the Master FE, BE, and MDE) to a public folder that ALL users have access to, will everyone be able to bring up the database Form?
2) How would this affect what was already set up when I ran Bob Larson's utility (or even the splitting and MDE creation)?
3) Is there a way to "Undo" what was previously "Done" to this database (ie: Splitting, Larson Utility, MDE creation) in order to correct the issue, or do I need to start from scratch and split the database while it's on a Public drive.
I hope this makes sense. Thanks in advance for your help.
Michael
Hi!
I just want to know that " How to split the Access database in Front End and Back End application"? I am creating a database that i want to store on server and simultaneously want to give access to 20 terminals (cleints) to access the database.
Secondly, I have to provide a field in a form "Document number". However as per the requirement user can enter "PIR No", "Serial No" or at times both as document number. Both the things "PIR No" and "Serial No" have different format types like "PIR No 001" and "Srl No001".
On basis of document number later i have to give the option to search the particular document. Please guide me how to provide the option to enter the field values.
Appreciate any help on above.
Regards,
Nick