How to control the below message to something like this through VBA:
"The Job: " & JobNumber & " already exists in the table." or to open an alternate form where they can make the change. Allowing duplicates is not appropriate for what I am trying to accomplish. I just want a friendly way of rerouting a user to understandable answer.
instead of this:
"The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again."
How can I change the default message (as you can see in the picture) that appear every time that I try to update my record?
I want to write something like "You Have to select a different Number"
And one more question, the message only appear when I'm pressing the record selectorbutton only after the user has already filled all the form) is there a possibility that I can write a code that will check for duplicate data immediately after the user typed it?
the below scrip was taken from another forum member.
i have put this in the Forms / error VBA
but i still a little lost
i have set 3 fields to be indexed not to allow duplicate information (Forename, Surename, DOB)
i was then advised to error trap so it would highlight that i have enterd a duplicate record on typing in the DOB (As that as third feild to be entered)
so i then used the below script, however this doesnt highlight that it is a duplicate it just doesnt let me go on to the next record, the only time the error message is highlighted is when i go into design mode.
anyideas on where to go from here.
Private Sub Form_Error(DataErr As Integer, Response As Integer) If DataErr = 3022 Then Response = acDataErrContinue MsgBox "Tis MerID alredy exist!" Exit Sub End If If DataErr = 2169 Then Response = acDataErrContinue MsgBox "Tis record will not be saved!" Exit Sub End If
I have a form - see attached image. The first text box is called Job_No. When a number is entered here how can I check that the number doesn't already exist when the user tabs to the next box. Then if it does exist display a custom message to the effect "This already exists" and not the Access default duplicate error message.
I have a form which is based on student records. What I'm trying to get Access to do is to bring up an error message as soon a duplicate student number has been entered. At present I've managed to replace the Access standard error message 3022 with my own by using the following code:
Private Sub Form_Error(DataErr As Integer, Response As Integer) Const conDuplicateKey = 3022 Dim strMsg As String
If DataErr = conDuplicateKey Then Response = acDataErrContinue strMsg = "Duplicated record. Please recheck your data." MsgBox strMsg End If End Sub
However the error message only appears when you try to leave the form (e.g. start a new record). I would like the error message to appear as soon as the user leaves the Student Number text box on the form. Is there anyway to do this?
So now, I'm using the code below to prevent duplicate name entry and it is working great - EXCEPT when I enter a first or last name which contains a ' (ie, O'Tool, O'Malley, O'Hern)...anyone got any ideas for me on how to make this not happen?
The error I get is:
Run Time error '3075'
Syntax error (missing operator) in query expression '[Last Name]='O'Hern' And [First Name]='Lori'.
The code i'm using is:
Private Sub Last_Name_AfterUpdate()
'Check for duplicate first and last name using DCount
If DCount("*", "[Constituents]", "[Last Name]= '" & Me![Last Name] & "' And [First Name] = '" & Me![First Name] & "'") > 0 Then Beep MsgBox "This first and last name already exists in the database. Please check that you are not entering a duplicate constituent before continuing.", vbOKOnly, "Duplicate Value" Cancel = True End If
I need to be able to produce an error on a form where the user attempts to create a new user that already exists. The error needs to be produced when the save button is clicked.
See below for the existing code on my save button which exists in form, 'frmAddEditUser':
Private Sub cmdSave_Click() If IsNull(cboManagerID) = True Then MsgBox "Please select a manager", vbExclamation, "Details Missing!" Me.cboManagerID.Requery
[Code] ....
Currently, if I attempt to create a user with the same Payroll ID as an existing user, my 'User details saved' message box is displayed and to the user it looks like a new record has saved successfully which isn't the case.
I need a message box to appear displaying something like "Payroll ID n already exists" where n is the 'PayrollID' of the duplicate record. (Is it possible to combine a value from a certain control and ones own custom text?)
Note: PayrollID is a combination of letters and numbers, i.e. two letters, followed by 5 numbers, e.g. JD12345.
For reference, the table/field and and control are called, '[tblUser].[PayrollID]' and 'txtPayrollID' (on 'frmAddEditUser') respectively; it is from this field and control that I want the error to be produced if the user is entering the same values which are existing in 'tblUser'.
I was using the following code on a field (ItemCode) that was indexed to prevent duplication of records. The intent is that the user will get an error message that a duplicate exists before they enter all the data for the record and get the built in error message that Access 2003 provides when an index violation has occurred.
Code: Private Sub ItemCode_BeforeUpdate(Cancel As Integer) Dim Answer As Variant Answer = DLookup("[ItemCode]", "tblQuestions", "[ItemCode] = '" & Me.ItemCode & "'") If Not IsNull(Answer) Then MsgBox "Item Code already exists" & vbCrLf & "Please enter unique Item Code.", vbCritical + vbOKOnly + vbDefaultButton1, "Duplicate" Cancel = True Me.ItemCode.Undo Else: End If End Sub
Now, the index for this is based on two fields (ItemCode and Question Group). I would like to display the same message before update but don't know how to include the second field in the syntax.
I am getting a "cannot change or add a record because a related record is required in table 'tblOrder'". I have scoured this site so forgive me if there is a post already on this.
My Order table has:
OrderID CustomerID SalesTaxRate
My Order detail table has: OrderDetailID PoNumber TransDate ProductID OrderID QuantitySold QuantityReceived QuantityOrdered TransType
I wasn't sure if by this you could point me in the right direction as to why it is saying this. I am very new to Access so bare with me. Thanks
I have set up a simple switchboard that gives the user a choice of 2 forms. The second from allows the user to navigate through a questionaire for a particualar individual. I have set up some buttons to advance thru the questions and answers. When I reach the end of the dataset, I get the error message "You can't go to the specified record." I also get this message when I am on the first question and try to page backwards. Is there a way to change this error message to something more meaningful to my users - like "End of questionaire" or "Beginning of questionaire"?
I have a table with one primary key (ClientID) which is an autonumber (cannot be duplicated), and another field which is a number field which is set to a random 6 digits (also cannot be duplicated) whenever a new client record is created.
Now, the main database is on a desktop, and my partner and i are connected to this main database through our laptops whenever we're in the office. For the last 6 months, I had only the ClientID in the form (from the Client Table), and everything would work fine whenever we created a new record in the Form, even if we created a new record at the same time on our personal laptops, the numbers would automatically be increased by one w/ no error.
I just added the other field now, the regular 6 digit random number field, and sometimes (only sometimes) when we both have a different client and start a new record, we get error messages that says we're creating duplicates. When that error message comes up, one of us has to close down the form completely, and reopen and start a new record again. Not sure why this is happening. Here is the error message.
I created a small database with three table 'parts' 'jobs' abnd 'suppliers'. I have created forms and queries and am now trying to add some records into my 'parts' table. However every time i try to do so, an error message pops up saying 'you cannot add or change a record because a related record is required in table 'supplier'.
I've got a table which lists accounts with an associated charge. If the account has multiple charges, then the account appears multiple times, for each charge. I'd like to consolidate the duplicates without losing each charge that is associated with the account.
Access 2010. I inherited a database that I need to copy and get it ready for next year's data. There are several places in the various tables where the default value on a field is 2013. I need to change to 2014. Any vba code or macro that I can do this without opening all the tables to change the values?
1. I have a database (see attached) with three tables all of them with the same fields. The first three are numbers (InCo_No, Proto_No, Year_No). Each of these fields (numbers) can be the same in the other table(eg. Year_No), but the combination of the three cannot be.
How can I prevent the entry of a duplicate combination of these three fields?
2. I want to have a form to fill the three tables separately, depending the values in the other fields.
Currently I have a calculated field in my table; however, under certain circumstances I need to change the value to another value which is not related to the calculation. I understand that the calculated fields are read only (why is that?), so I was wondering if there was any way to change values within a calculated column without actually changing the expression itself.
I'm in datasheet design view and I'm trying to change the data type of a cell and add a lookup. When I try to change the datatype I get an error which says I need to remove a relationship first - except I did. I deleted all the relationships, saved and closed the relationship view and closed and reopened the table.
We are working on an Access (2007) database that is on a SharePoint Site (2007).
Currently the form is operational, but there is one last thing that would be nice to have.
The table is "Updated Headcount" which contains "EMP_ID" which are unique numbers stored as text.
In the event a new employee is entered in the system by another user on this site we would like to prevent any duplicate "EMPID"s from being entered and saved on the SharePoint, we would also like to alert the user and prevent the data from being saved.
All data is currently bound, so once the user makes a change it is made, no submit button is required.
We are running into some difficulties in doing a dlookup from the value entered and comparing to a column in the table.
TABLE - UPDATED HEADCOUNT COLUMN in UPDATED HEADCOUNT - EMPID FORM CELL user will input an EMPID - newEMPID FORM CELL used for a dlookup to compare what user has entered to what is already in the table - duplicateEMPID
So below is what we are trying to do, we are sure there are a few commands missing....
I have ODBC linked tables to a DB2 database.When I try to edit the values in some of the tables (open the table in dataview and edit one record) I get a 3021 Error -No current record.On other tables (linked the same way) I don't get this error
If I try the update by running a query on the same table, I get no errors.
The system I have is a german Access 2010 on german WinXP and a connection to DB2 LUW v9.7
Is there any set of settings necessary for ODBC to work with access and vice versa?
I'm trying to determine the SQL to return only those records in a table which have duplicate values in each of two fields, but different values in a third field. Here's an example:
Code:
AcctNum FoodType FoodClass ------- -------- --------- A123 Apple Fruit A123 Apple Fruit A123 Grape Fruit A456 Potato Vegetable A456 Potato Perishable A789 Carrot Vegetable A001 Banana Fruit
For the above table, I'm trying to return records which have multiple entries for AcctNum + FoodType, but DIFFERENT values for FoodClass. So for the above table, the query would return:
It returns these two records because there is more than one record with for the AcctNum + FoodType (i.e. 'A456' + 'Potato'), but DIFFERENT values for FoodClass (i.e. one record has 'Vegetable' while the other has 'Perishable').
I have struggled with this for so long now I hope someone can help. I have a form called frm_Collections which is run from the query (qry_Collections). When I type into the Reg field in the Form I would like the user to know if the Reg details have already been used in a previous record. The database can have duplicates in this field, however a "Warning Message" would promt some investigation. I have tried loads of DLookup on Before Update, but really need setting of in the right direction. Thanks
I currently have a field on a form thats indexed (no duplicate values). What I want, is if the user types a existing social in the field, that it lets them know the social is in use and that the record will not save.
I believe this will have to use the before update event for my pSocialSecurity control and that I will need to use the DCount function.
I have a single table in my database and I have to make a form for entering contact details for clients, staff, funding bodies and everyone else into this table. There is a phone number and what code I would use the get it to check if the number already exists.
If it does, I wanted it to return a custom message telling you what entries it already exists for by displaying certain fields so that they can be identified, such as name and organisation, but then I wanted the custom message to allow you to confirm entry of the data anyway. This is because there may have been an error in entry or as some people may be contacted on the same phone number, I want it to allow the option to continue and enter the data anyway.
