Tables :: How To Place Text Default Value On Date / Time Field
Aug 3, 2014I have a simple project to work on
In a field for date/time, I want to have a default value of No Shipment Date, this text for a date/time field.
ADVERTISEMENT
Tables :: How To Display Default Value Of Date / Time Field For Current Year
Aug 20, 2013All, using access 2010. How do I display the default value of a date/time field to just the current year instead of using =date() to get the full date.
View 5 Replies View RelatedTables :: Date / Time Field - Importing Text File
Aug 13, 2013I am having some difficulties with a Date/Time Field. I am importing a | delimted text file into a table and the Date Field is resulting in a Type Conversion Error.In the raw text file, the Date Field has the following Format (example): 01/03/2013 03:11 PM
My import Spec is as follows:
File Format: Delimited
Field Delimter: |
Language: English
[code]....
The only thing I can think of, is that the mix of Leading Zeros in the Time AND AM/PM is causing a problem. But, I do not see a way to address this with an import spec.The odd thing is that if I import the DateOpened Field as Text, THEN change the DataType to Date/Time AFTER import, then save the table, it recognized/converts the DateOpened Fields correctly.I'd LIKE to get the import spec correct (I have to update twice daily), But, barring that, if I could import as Text then build a Macro that would:
1) import text file(s)
2) change certain fields datatypes to Date/Time
3) Save Table(s)
That would suffice. I could then use VBS (and perhaps windows scheduler) to run the macro when needed.
Text Box Default Value With Date / Time / Year
Aug 9, 2012I am having an issue trying to add the year at the end of the following line:
=(1000000*(Month(Now())))+(10000*(Day(Now())))+(10 0*Hour(Now()))+(1*Minute(Now()))
If I put + (Year(Date())) it doesn't work..What I want displayed is this: 80911512012
8 = month
09 = day
1151 = time
2012 = year
Forms :: Setting Temporary Default Value For Date / Time Field
Jul 3, 2013My setup:
frmUsedOilContract (contains a header and a subform)
subfrmUsedOilContract (contains a few controls) [datasheet view]
- Removed Date
- Voucher Number
- Building Number
I implemented some code so that a temporary default value could be set for the date and the Voucher Number. I also have the default value for 'txtRemovalDate' set at 'Date()'.
PHP Code:
Private Sub txtVoucherNumber_AfterUpdate() 'Set current value to default value.
txtVoucherNumber.DefaultValue = txtVoucherNumber.ValueEnd Sub
PHP Code:
Private Sub txtRemovalDate_AfterUpdate() 'Set current value to default value.
txtRemovalDate.DefaultValue = txtRemovalDate.ValueEnd Sub
Also have code so the default value is null when the form is opened.
PHP Code:
Private Sub Form_Open(Cancel As Integer) 'Set Default Value properties to nothing.
txtVoucherNumber.DefaultValue = vbNullString txtRemovalDate.DefaultValue = vbNullStringEnd Sub
This all works great until I try to change the date. If I use the default date (today's date), the new record will stay with today's date. If I change it to a different date, the new record displays a time instead.
Modules & VBA :: Default Property For Control Bounded To Date / Time Field
Dec 4, 2013Access 2007
In a table I have 2 fields:
D1 , Date/Time , DefaultValue: Date()
D2 , Date/Time , DefaultValue: Date()+1
In a form (bounded to this table) I have, of course, 2 controls bounded to this fields:
txtD1 and txtD2
If the user change the value in txtD1 (using the Date picker) I like to change the DefaultValue for txtD1 to the new date and the DefaultValue for txtD2 to the new date + 1 day. Something like this:
Code:
Private Sub txtD1_AfterUpdate()
Me.txtD1.DefaultValue = Me.txtD1
Me.txtD2.DefaultValue = Me.txtD1 + 1 day
End Sub
I tried whatever crossed my mind... with the same "result" : #Name?
My Regional settings:
Short date format: dd.MM.yyyy
Date separator: Dot
Simple: 05.12.2013
How To Place Unlimited Notes With Date And Time
Oct 30, 2014How can I add unlimited notes window to Access Database? Since, I would like to see on each account of my clients every single note I have been taken through out the years.
View 1 Replies View RelatedChange Text To Date/Time Field In A Query
Feb 7, 2008I have created a table called - "Test"
The properties of the table is listed below
Table Name: Test
Field Name: ADMDAT2 (Text)
DISDAT2 (Text)
Operation Date (Date/Time)
I have written a query to populate a field where the Operation Date is between the ADMDAT2 and DISDAT2
Expr1: IIf([ADMDAT2] Is Null,"",IIf([Operation Date]>=[ADMDAT2] And [Operation Date]<=[DISDAT2],"Match"))
Unfornately it returns and ERROR message... I believe this may be because, the data type of the field, matching a Text with a Date/Time, I have rerun the query using a sample table where all the fields are Date/Time, and it work perfectly.
What i need help with how do i convert a text field into a Date/Time in a query?
So i can place that in the query before i populate the Test table. therefore it all should be date/time
thanks in advance
How Can I Add Current Time As Default In A Text Box
Aug 17, 2005I want to add current time as default in a text box, how can i do it?
View 1 Replies View RelatedSet Default Value Date Per The Time Of Day
Apr 25, 2006I have search for an answer on this question.
What I am trying to do is set the default value =Date() until 11:00am and then I want the date to covert to the next day.
Can anyone please help me with this or is this even possible?
Tables :: Date / Time Field In Access 2010 Modified In Sharepoint List
Dec 2, 2013I have a table in my Access 2010 Database with few date/time fields. I have set different formats like Short Time, Medium Time etc. But when I link this table to Sharepoint list, all the date/time fields have been modified to their default format (General Date).
Is there a way we can keep the formats as such even after linked to Sharepoint list? If not, is there a workaround?
Default Value For Date/Time In MS ACCESS, Retrieve In Java
Sep 29, 2004What is the proper way to store in a field if I want to store current date AND time as a timestamp. I chose Date/Time as the data type and General Date in the Format. Now I wanted a timestamp whenever a new row is added so I placed =Date() in the default value but it only shows me the date, not the time?
Second question if you know Java: I retrieve this date in a java.sql.date and .toString() shows me the correct result in the default format but when i use the DateFormat.format() method on it, i get a Null Pointer Exception. What could be the problem?
Tables :: Calculate Default Date Value Based On Todays Date
Jul 16, 2014I have a database which stores information relating to club members, which I'm in the middle of giving a bit of a facelift and one thing I want to automate is the calculation of the expiry date.
My memberships expire annually at the end of December and the expiry date is set as a default value within the table properties. This has to be manually changed every September (every new member from then pays for 15 months) to the following December.
Is there a formula I can insert in the defaul value field that will return December the current year if todays date is between January and August, and December next year if todays date is between September and December?
Date And Text As Default
Aug 9, 2006I tried searching everywhere and cant seem to find an answer to this one...
Is it possible to have a default value in a table which would be current month and year + text? Eg. mm/yy "text"
=now() & "text"
is fine but I need to format the date to mm/yy and cant seem to get it right.
eg. 08/06 Lease Payments
Also is there a way to do it for previous month, so if processing today it would give 07/06 Lease Payments?
Thanks in advance!
Text Box Default Date.
Mar 4, 2005Hi Dudes
I have a text box on a form which is formatted as medium date and I want it to default to the Monday of the following week. So for today it should have 07-Mar-05 in the text box.
Can anyone please advise a method for this.
Thanks
VC
Tables :: Populate Date Based On Specific Text In Another Field
Mar 27, 2013I would like the "DateOfConfirmation" to populate with today's date when "SSurvDiagThisYear" is Confirmed.
The DateRecordCreated is a simple =Date() that populates when the record is entered into the table.
SSurvDiagThis Year is the case outcome - Pending, Probable, or Confirmed. It is possible that the case could be confirmed on the same day it was entered into the table but that is RARE.
I am hoping for the The DateOfConfirmation to capture the date the case is confirmed so that I can gather some duration between the case being opened to confirmed.
SSurvDiagThisYearDateOfConfirmationDateRecordCreatedIdentificationNoPending12/31/2001269Pending4/1/1999270Confirmed7/29/2001338Pending5/14/2009375Confirmed2/20/2012440Pending3/30/2001543Pending7/1/2000552Confirmed3/30/2001596Pending8/3/2001649Pending6/15/2001672
Default Value - Text Or Date? - Yy Or Mm Format
Mar 6, 2005I am hoping someone can help me, a real novice at Access 2000 - I am trying to construct a couple fields in a table, 1 of which will show a default value equal to a 2-digit year (yy) based on the current date. The second will display a default value equal to a two digit month (mm) based on the current date. Text fields would be ideal, but date field could work if it's the only way. Thank you for helping out a newbie.
View 4 Replies View RelatedText Box Set Default Value To Date Being Converted To 1905-random Month / Day
May 29, 2015Am just trying to set the default value (on the form, not programmatically) of a text box to a date but with every attempt it either fails or sets the date to 1905-randmon month & random day.I've tried a few different methods from various online sources.
=Now() works fine.
Any attempt to set to an actual date returns 1905-Random Month-Random Day?I am trying to set it to the 1st day of the current month.Text Box is formatted as Short Date - Regional settings are set to the ISO standard numeric date format YYYY-MM-DD.
Forms :: Update Time Portion Of Date / Time Field
Aug 29, 2013I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View RelatedGeneral :: Text Box On Form - How To Make Textbox Date Default To Previous Record
Nov 13, 2013I'm having trouble with a Form and getting a text box entry box (Date entry) default to the date entered on the last record, which is linked to a table.
The only way I can get it to work is to type the date into the Text Box's Default property, for example, #11/13/13".
How to get the correct syntax or code into the Default property of the Text Box to make this work? I only want the entry to change versus the previous record/entry if the User changes / enters a new date.
Tables :: Default Value Equal To Date Entered By User
Dec 21, 2012I want a default value to equal the first 2 characters of field [first name] and first 3 characters of field [last name] and the numeric datevalue of [DOB] 'date of birth'.
In excel its easy,
C D E resultformula
AndrewTester12/12/1980AnTes-29567
Formula LEFT(c9,2)&LEFT(d9,3)&"-"&e9
How do I get same result in Access?
tried
Field 'PRN', a text field set as default =""""& left([first name],2}+LEFT(Last name],3), date()&""""
Access accepted the above statement but when I input user details the default doesn't work.
General :: Default Value Of Text Field With Selection Of Combo Box
Sep 9, 2014In the database attached I have a form called from Candidates.In this form is a combo box where a user can select what company the candidate belongs too.
However some candidates are Private Individuals (do not belong to a company).Therefore, I want the Position field to be set to 'n/a" by default if 'Private Individual' is selected.
General :: Date From One Field As Default
Jan 21, 2013Is there a way to use the date entered in one field in a table as the default date on another field in the same table?
View 1 Replies View RelatedIgnore Time In Date And Time Field
Mar 6, 2007Hi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
Sort By Time Only In A Date / Time Field
Mar 19, 2014I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
data looks like this:
8/22/13 4:23 PM
1/29/14 12:21 PM
1/28/14 3:27 PM
8/26/13 4:27 PM
[code]....
this is what I have come up with to extract the time component of data set so that I can then later, sort it by the time in a query.
JustTime: TimeValue([YourField])
JustTime: ("hh:mm",([DateTaken])) and or ("hh:mm",[DateTaken])
I get either invalid operator or invalid syntax errors trying both of these.
Forms :: Text Default Value For Control Box Bound To Number Field?
Jul 14, 2014Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....