I have a field in which I wish to post several contacts. The contacts are listed in a table and populate the specific field via a drop down. In this specific field I want to select "mary" "bob" and "fred" (all three to display) however only one is displayed.....
View RepliesI am trying to create a database for a company I work with which creates a food product which needs to be traceable from creation to finish. I have created a table with all of the necessary information for the creation of a batch.
1. During this batch creation, we add water multiple times which we record each time, i.e., 2cups, 2 cups, 2cups, etc. I have a field for "water", and wish to record each instance and amount of water added, but only want one record for the complete batch. Also I only need the total water amount in the batch record, but want to be able to expand to see the individual amounts as needed.
2. Also, we need to record various readings (temp, etc.) throughout batch creation. Again, same problem as before.
What is the best way to do this? I want to be able to reference this info anytime I want to check creation specs for each individual batch.
I am using forms for data entry.
Please can't someone rescue me from this problem.
I have a database containing 3 tables: Book, Member, and Loan. A relationship exists between the 3 tables(the relationship has no problems, I have enabled referential integrity). I created a query named Loan Query which uses all the 3 tables.
In the loan Query, the Member ID field is in Loan Table and the Member Name field is in the Member Table. This allows the database to automatically type the Name when the Member ID is entered into the query retrieving the information from the Member Table. This also works fine. But the problem is that the Name field of the Loan TABLE (not query) remains blank.
All I want to do is for the database to also write the Name in the Loan Table along with the Loan Query. I will also have to apply the same for other fields also.
I am a beginner in Microsoft Access and so whosoever replies, please elaborate the solution.
Hi everybody
I have an assesment and need to create a database, I'm just starting with access and I need some little help if anyone has time.
I'm doing the database for an interim managment company and i have problem with the experience category. Basically because every candidate has got at least 3 or 4 different experiences, I don't know how to design the table. All I know is that I probably will have to create a separate table for this.
Thanks to anyone who will help me.
Ilan
Hi All,
I am wanting to build a table which consists of all the queries and tables in the database.
I am expecting column 1 to have all the queries and column 2 to contain all the tables that make up the query. So the table will look like this:
Queries - Linked Tables
Query1 - Table1
Query2 - Table1
Query2 - Table2
Query3 - Table1
Query3 - Table4
As you can see a table can be linked to any number of tables.
Now for my actual question. I don't want to have to type in all the queries and tables. I would like to choose any query and table from a drop down of all possible queries and tables that are currently in the database - like a list, where the list contains all the possible values.
I would then select the relevant entry.
Any pointers would be great.
Thanks,
Evan
I have a drop down list where you pick from 6 recruiters. i put it on my candidates from and when yiou change a recruiter on one candidate then all the candidates get changed to that recruiter. Any ideas what i did wrong?
View 1 Replies View RelatedHey all, new here, question for everyone. I have a fairly large database, I need to make a form that has 3 drop down boxes on it, one will be corresponding to a field in my table called Race, another with Affiliation and the last one with Gender, race will have 7 options, affiliation 20 options and gender 2 options. I need to be able to have a search/query setup so that a user chooses one option from each drop down and have it do a search in my table corresponding to what they choose. I really have no idea howto do this and hoping someone here could help. thanks
View 14 Replies View RelatedI've created a drop-down box on a form, that allows a user to choose from three names.
However, when I choose say name A, it then populates all the other entries with name A.
For example:
record 1 has name A
record 2 has name b
record 3 has name a
if i then enter a new record, and enter name C in it, it changes records 1, 2 and 3 to show name C too.
is there a setting i need to change or something?
Trying to use some code to 'Select All' from a 'Check Box Drop Down' Multi Value Field . The table field size is long integer.
When trying to "Select All" the code returns a RTE 3163 "This field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data".
Private Sub cmdSelectAll_Click()
Dim SelVals, i
ReDim SelVals(0 To lkupAssignedTo.ListCount - 1)
For i = 0 To lkupAssignedTo.ListCount - 1
SelVals(i) = lkupAssignedTo.Column(1, i)
Next i
lkupAssignedTo.Value = SelVals
End Sub
Not my code, but just something I have found and trying to adapt. Tried changing the field sizes but no luck. Maybe something to do with declaring variables perhaps??
I am designing a search query that will allow the user to look up a record in a database to view it. I have everything already set up, and most of it working properly.
The user can recall a database entry using 7 different criteria--Type, Customer, PartNo, JobNo, Warehouse, Bin, and Shelf. The Type and Warehouse entries on the database are drop-down values, the other 5 values are text entries.
So far, I have been able to get the look up query to pull up the desired records on the Customer, PartNo, JobNo, Bin, and Shelf criteria using
Code:
Like "*" & [Forms]![Search Form]![Customer] & "*"
.
However, with Type and Warehouse criterion, the two that use drop-down boxes in the database, I have been unsuccessful in being able to call up any records using either the above partial or the more exact:
Code:
=[Forms]![Search Form]![Type]
I did try to change Type to a textbox on the look up query, but that was similarly unsuccessful. On a side note, I must use drop-downs on the Warehouse field since I have another query that concatenates that value with a couple others.
How can I, without delving into VB coding unless absolutely necessary, format the lookup query so that it will read the values of the drop downs?
I have a database that is split - one central PC holds the back end, and then there are multiple end users with a copy each of the front end.We have updated a drop down menu on a field in the back end to add some new entries, but this is not showing up on the front end copies.Is there an easy way of updating the front end to show the changes?
View 3 Replies View RelatedI have a form where a user can select from a listbox (pulled from a database) and "Add product" - it then goes into a Textbox, each taking a new line when "Add product" button pressed. Then when they press "Add Customer" those details along with other entered details gets stored in my Customer Database..
The textbox store multi-line entries in the "ProductName" field heading in database.
Is there anyway i can use a List instead of the textbox? Adding individual entries to one certain customer? I have an EDIT facility aswell so would be easier to have a "Remove Product" button instead of manually backspacing a whole product entry from another textbox (containing all products, on new lines).
I have a table in access which is updated weekly; I need to create two tables from this updated table.
1st table will consist of all the new entries for the current week
2nd table will consist of all the entries from the previous week - an amalgamation of all the entries which are not from the "current week" (table) For example; the table below shows the two entries from last week.
ID
Name
1
Adam
2
Ben
This week I have three new entries New entries
ID
Name
3
Charles
4
Richard
So when I run the same query next week I will get something like this.
Old Entries
ID
Name
1
Adam
2
Ben
3
Charles
4
Richard
[code]....
How do I get a query /queries which divides up the weeks new entries and also all the old entries.
Is it possible to create a query that asks for multi entries in one column .....
For example : If I have parts that I purchase and some of them get rejected I want to inform someone of those parts, these parts could be on order numbers, 1,2,8,10 ....
I cannot just search on rejected because some parts could have been reject say 2 weeks ago but new ones have not arrived yet so the flag "rejected" is still showing ....
Is it possible to set the criteria that when asked for the order number/s you could type in ,1,2,8,10 ....
I have created a table that acts as a header for my data and a second table that acts as line item data. What I need to do now is add a second child table that uses the line item data as its parent table and stores associated line items for each record. Is this possible?
This is a skeleton view of what I'm going for:
Master Table:
tlbAuditReportHeader
- AuditDate
- AuditArea
- Auditor
Sub Table:
tblDiscrepancy
- Discrepancy
- CorrectiveAction
- ActualCompletionDate
- VerifiedDate
- Notes
Sub table to Sub Table
tblFollowUp
- FollowUpDate
- AssignedTo
- SpokeWith
- EstimatedCompletionDate
- Notes
Sometimes tasks change hands or are pushed back depending on work load. It would be nice to be able to track something like this.
I am using collect data via email process to collect data by email, purpose is to update not to add new records but to update. The condition for update is to have data from one table only.
I have 4 tables data from which should be sent by email. These tables are related. I made a query based on tables and query is update-able. When I use this query, wizard does not give option of updating the data but only of adding new records.
I tried to first make a make table from a make table query but that too have the same result.
Any ways to make treat these tables in a single table? Almost all fields except one shall be just to read and one field shall be updated.
Found this on the net should be a definate for everyone before posting.:D
Before Posting (http://205.209.177.141/albino_files007/posting(www.albinoblacksheep.com).swf)
Hi everyone,
I have made a form for our database and I would like to have a .gif image display when a certain checkbox is checked. Any idea how to do this?
Thanks
PS - sorry if this is a noob question...I don't use access much
Does anyone know why I get Error on Page when I try to attach a sample file to my postings..?
Maybe I do not have authority?
Thanks
Dave P
I have two tables, one with a list of accounts (ACC), the other to post data about the accounts (DATA). I created a form for DATA and a combo box to select the account it relates to.
In the DATA split form, the account name shows up correctly in the datasheet. But when I select the DATA table, the ID of the account name shows up instead. How do I get the table to look the same as the datasheet in the split form?
Im using Access 2000.
Essentially I want to find out which of the entries in my master table have matching entries in my other tables, and list the ones that do.
So if I have an entry in the master table for “productA”, and there are also matching entries for “productA” in tables “SupplierC” and “SupplierD”. I want to perform a query that will output a list showing “SupplierC” and “SupplierD” (I have A & B tables but if there isn’t an entry in them for “ProductA” I don’t want them on the list.)
I intend to use the results to populate the values of a combo box in future so I require the list to be in a single column, rather than across many columns. Does anyone know if this is possible?
My master table is called “OurProductsTable” and the four supplier tables are called “SupplierA”, “SupplierB”, “SupplierC”, and “SupplierD”.
Each Table has a primary key called “ProductID” and I have linked them together on the relationships screen.
I’m not sure if this is the proper method but I also made another field in each of the supplier tables called “CompanyName” and set the default value as the name of each supplier, so if the entry for supplierC matches the master table entry I can return the “CompanyName” value of “SupplierC”.
Here’s what I thought the code should kind of look like but I don’t know how to apply it properly in a query:
I have a table of Dealers. Each dealer has a REP. I want to CHANGE the rep of the Dealer going forward but RETAIN the historical.
View 4 Replies View RelatedI'm new to MS Access, indeed database design as a whole.
I have been tasked with creating an issues logging database and am having some issues...
I have a table/form that has all the fields I want, including a unique ID, called "Issues". I want to be able to log multiple entries in another table called "emails". The trouble is I am not having much luck. I can create an entry in the issues Form which then shows in the emails but I can't then add another email under the same ID in the "Issues" table.
Let's say if I am building a database for a library and in a table the book titles are the primary key and there is a field "authors" to record the authors' names.
But sometimes a book may have several writers and if I type all of them into one field, Access only recognise as one person. So how can I format/set up so that when I use query or filter, each one of names can be identified?
If multiple entries are not feasible, how else should I design my tables?
Hi Everyone,
I have read several tutorials on linking tables to store data, however I cant seem to get this right. I need a little help with my table design and structure. What I am trying to accomplish is a database that captures the following:
-Name
-Employee#
-Group # (1-25 One person can be in more than 1 group)
-Referred By (Only one name for each Group the person is in)
-Priority # (Can be a 1 or a 2 for each group # the person is in)
-Outcome of group (Just a small text explination of the outcome)
-Date Scheduled (Can be mutiple dates scheduled for each group)
So basically what I want to do is be able to retrieve a list of what Groups an emplyee is in, Who reffered them to that group, the Priority # of that person in the group and what dates they are scheduled for each group along with the outcome of each group they have attended. I know I need to join multiple tables but I am a bit stumped on how to go about doing this. Any help with my database and table design would be much appriciated. Thanks.
I was browsing the Northwind database and notice that there is a dropdown in the table (See attached print screen). I've been trying to recreate it but I'm having a hard time.
View 2 Replies View Related