I've just come accross a problem where pasted data dissapears from view. It's caused by people being a bit careless and copying the line above (from word or notepad for example), which adds a return and then the data drops out of view.I really want to create a validation rule to make it impossible for returns to be pasted but I'm not sure how.
View RepliesI have a simple data entry form where I can key the "row", "COLUMN", SPACE "a" and space "B" onto an access 2010 table. Is there a way that if I key the same four fields, e.g., A5AB that I get a message back before updating telling me that combination already exists?
I do generate a calculated data field, which in this case would be "a5ab" and which is displayed on report screens. Could the value of this calculated field be stored on the Table and be used to prevent the same value from again be entered on the Table?
how to stop user from leaving field without selecting item or entering data
View 2 Replies View RelatedI have a main form with several continuous subforms. Each subform consists of several listbox controls. I would like to require the user to select an item from the listbox before being allowed to move to the next record in the subform, and upon reaching the last record in that continuous subform, to require an entry there in order to move to the first record in the next cont. subform.
As an added bonus, it would be nice, though not necessary, to automatically jump the focus from one record to the next after data is entered. But my basic goal is to avoid skipping records.
Caveat: I cannot use the "required" option in the field to which the control is bound because that field has a default value previously entered using an append query. (The default value basically means "not yet entered" and is not one of the options in the listbox. I am using this because this field is a foreign key in the table, thus it must have a value in order to have a record with which to populate the subform.)
My apologies if this has been asked and answered elsewhere, but I've searched and, while I found a few related threads, they don't quite answer my question. Here they are for reference:
http://www.access-programmers.co.uk/forums/showthread.php?t=38364
http://www.access-programmers.co.uk/forums/showthread.php?t=69047
http://www.access-programmers.co.uk/forums/showthread.php?t=103176
Thanks for any help! Also, if you are going to recommend VB code, could you be specific about how and where I should use it? I'm not afraid of code, but I'm definitely new to it...
I want to Paste append some data into a table in access. The data which I need to paste is like to following:
3100986082 7DVJ438 264539280 1FWS545 11792093 1261185446
Access leaves the data with the letters in it (shown in bold) blank, how can I solve this, because I want to paste everything. I already put in design view the settings to text, but it doesn't work...
I'm using Microsoft Access 2007
I have three tables: the 1st is for product's identification, the 2nd is for registered products, and the 3rd is for under-registration products
and the primary key for the three tables is the Registration Number
and there is a one to one relationship between the product identification and the registered products
and a one to one relationship between the product identification and the under registration products
What I want to do is to make an append query to move the under registration product to the registered product when its process is over.
One of my problems is with the primary key for the under registration products table, as they only get their registration number when the process is over. so how can I enter data into this table without the value of the primary key ?
Is it possible in Access to create one input form that includes fields from different tables.
I want to create a single form that dispenses input fields to separate tables, I don't see anything to make this happen. I know you can retrieve data from separate tables utilizing querys. But is it possible to input data into a single form to multiple tables ?
When I copy data from Outlook or MS Word that contains bullets or other HTML formatted text, into MS Access text control, the HTML tags are displayed in the tables.
The memo field in the table is set to Rich Text and so is the text control on the form.
Below is an example of the data I'm copying from Outlook email:
Fire Alarm Activation
Actual/Smoke Present
False
Planned Drill/Testing
Evacuation
2. Utilities/Power/Communication Failure
Now, below is what it looks like in my table or output in a report:
<ol>
<ol>
<li><strong>Fire Alarm Activation </strong></li>
</ol>
</ol>
<ul>
[Code] ....
How can I copy and paste and remove the html tags?
Hello,
My first post is on something that is troubling me. I have a Form acting as the display and entry point for data for a contact list, which is composed of two Tables as follows:
Contact - (text fields including: first name, last name, phone number home, phone number work, etc)
Industry Role - (yes/no tick boxes including: film, photographer, audio engineer, producer, reporter, etc)
The two Tables have a one to one relationship based on the URN field which is an autonumber. My problem is that when someone enters say a name, and then ticks a box, the autonumber will add two entries because it seems to see the first table then the second tables as sequential, and not the same thing. How do i go about making a form that can enter new records the same autonumber for two connected Tables?
I have a form within my database in which the user will enter data which will go into 2 separate tables. These 2 tables (Job and Client) are related. At the moment I have a subform in which the user enters Job information, and the main form where the user will enter client information.
The problem being is that the 2 sets of data do not associate themselves with each other, despite being related (The Client will be related to a job number. A client can have many jobs but a job can only have one client etc). It has to be done manually in the table which is not ideal as the DB will be split and rolled out to users via Access Runtime. I have been working on this DB for a while now and the problem is most likely right in front of me but I cannot see it!
Hello there! This might not be the right section to post in but it's regarding tables. Basically I have some SQL statements that copy data to a new table, which is written in VBcode and operates on the click of a button.
Basically the only problem is the messages:
"You are about to paste # rows into a new table/table"
"The existing table <name> will be deleted before you run the query"
The kind of message depends on the way I organise the SQL (either using it to append data (as in INSERT INTO tablename SELECT blah blah) or overwrite (SELECT blah blah INTO tablename).
I'd rather use the latter because it facilitates the desired wiping of all previous data and replacing it with fresh records. However I don't want to have to click "yes" every time this is done? Is there some VBcode perhaps, like the On Err code that I could use to get access to not pop up these messages? :D
I have a form, that once prompted, finds a certain record for the user. How do I prevent the user from being able to see any other records but that one, once the form is opened? The user needs to be able to edit the particular record they opened, without viewing or editing any other records in the database. Is there a way to hide the bar at the bottom of the form that allows users to manipulate through the different records?
View 6 Replies View RelatedSome days ago I made it by using "query", but now I forget it how I make the relation on this situation. Here is my problem.I have 3 Table on mdb file, named Table: A, B, Status.Table Status have One Filed with 1 Data: Dishonor
Table A have three fields
Sl Number: (Auto Number)
Status: Lookup wizard-data of (Table-Status)-Default Value is "Honor"
Amount:Number
Table B have two Fileds
Sl Number: Number
Status: Lookup wizard-data of (Table-Status)
After Entering Some data on Table A it's Look like as:
Asl numberstatusamount
1Honor5222
2Honor855
3Honor988
4Honor7777
5Honor777
6Honor9999
[code]...
Now I want to change the Status of SL Number Honor to Dishonor so I fillup data on Table B is as like following
sl numberstatus
5Dishonor
Now how I can get the result as following by using query:sl numberstatusamount
1Honor5222
2Honor855
3Honor988
4Honor7777
5Dishonor777
6Honor9999
7Honor6666
8Honor7777
9Honor666
Hey guys..
is there any way in which i can prevent the user operating a form from adding or deleting or editing any records ?
Good morning! I'm building a database for use by four technicians in a call-center type operation. The call records are purely transactional in nature -- once the call has been logged, the record is closed. If the customer calls again, a new record is opened.
The supervisor doesn't want the techs to be able to go back and edit a record once it's entered -- the records are for quality-control purposes and he doesn't want them gaming the system by going back and changing things after the initial call is logged (let's not discuss the issue of employee psychology, motivation, Office Space, etc.). So I'm trying to figure out how to do that; they all have wheel mice, and I can currently see all the records as I scroll back and forward with my mouse wheel, so I'm assuming they'll be able to, as well.
Any help?
Thanks,
Andreas
I'm ready to "publish" my desktop db for end users, however I want to limit their ability to view the objects in the Navigation Pane. Essentially, the only way I want the user to be able to interface with my db is through the forms I have created.
View 1 Replies View RelatedLet's see if I can explain this situation effectively...
I've been handed a database that is set up to track tutoring sessions of students. The original creator designed the database for 1 semester. I am trying to make it functional for x number of semesters. So here's my dilemma: I have several reports that are based on queries. I would like for the user to be able to run the report and it prompt for them to enter a date range, which would then output desired results for that range (I thought this would be more efficient than setting up the db to run reports by semester, so that the user would be able to narrow their results).
So in corresponding queries, I am adding the following criteria to the "Date" field:
Between [Enter Beginning Date] And [Enter Ending Date]. The query produces the right results, just not exactly in the way I would like to see them. This is because the query tracks the number of hours per mentor (the person giving the tutoring) and does a sum.
So in my results, it is summing the hours for every change in date occurrence. For example, the results should look like this (on the report):
Student 1
Mentor A xtotal hours
Student 2
Mentor A xtotal hours
Mentor B xtotal hours
Instead what I'm getting is a sum of hours for every different date, as follows:
Student 1
Mentor A xtotal hours
Mentor A xtotal hours
Mentor A xtotal hours
Student 2
Mentor A xtotal hours
Mentor A xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
Mentor B xtotal hours
And so on...
Maybe I'm approaching this is the wrong fashion? I haven't had much luck searching google or access help... maybe I'm searching with the wrong strings. :)
Any advice would be greatly appreciated.
I need to ensure that the data entered into a field on a form is correct. The field contains an email address and I have a function to check if the format is correct.
If the format is incorrect I need the cursor to return to the field in that record. The form is continuous.
What event should I use?
Twice a year, a database of mine is accessed and put too use by various staff within a time range of 1 week. the database is on a shared drive and in a location which can be accessed by all.
The staff access the database from different workstations and in some instances at the same time.
This has only led to issues in the database being copied and then confusing staff on what database to click on thus i have 2 databases which i then have to sift through and copy/paste into the correct one.
I want to know the best way i can:
1) Prevent multiple users accessing the database at a time.
2) making a copy of the original and typing into a separate database.
I am using Access 2002.I am going to be producing a macro that imports a txt file. Once the text file is imported there will be a empty field for a date value. Nothing in the file that is being imported will have a date in it.
I would like to (if possible) to, once the file is in the table, open an input box asking the user for a date (formated as YYYY-MM-DD) and once the date has been entered and the ok button pressed it inputs that date in to all records in the date field.
Hi.
I'm having trouble with two tables. I'm trying to COPY and PASTE some data from one table to the other. The tables are an exactly match apparently, I check each field and they match. Once I COPY one table data and go to the next table to PASTE APPEND , it starts pasting and all of a sudden stops and I get this message:
"THE TEXT YOU ENTERED ISN'T AN ITEM IN THE LIST. SELECT AN ITEM FROM THE LIST OR ENTER TEXT THAT MATCHES ONE OF THE ITEMS."
So, I have no idea what ITEMS it's reffering to. I click OK, and I keeps telling me same thing for at least 4 OK's clicks. After I'm asked if I am sure I want to past such number of records, by then, only a porcentage of the records are copied, not all. If I say NO I do not want to copy, it still copies anyway, but again, not all the date, just a portion.
Would you have any idea how I can get this problem solved or how did I get into this mess anyway?
I'd appreciate it.
Thanks.
I have been unable to find a simple way to copy a text entry from a Table Field and paste it to multiple records in Datasheet view.The Toolbar 'Paste' procedure copies to the selected record only and I am unaware of how to select multiple records, as per a spreadsheet procedure.
View 2 Replies View RelatedMoving data from one table to another table. Mainly we are using "Insert into table2 select* from table with where condition".
But in this case data moved one table to another as copy paste.
Is it any way to go data as cut paste...
I have an excel spreadsheet i want to copy and paste into a pre-formatted table, and the excel date format is integer YYYYMMDD or today is 20140825
I can't get the input mask in MS Access 2007 to create that !
A slight flaw in the design requires this change. What is the best way to do it?
View 8 Replies View RelatedI am trying to accomplish this in a macro. I know I was able to do this in older versions of access.I want to get data from a query and paste and append into a table. When I started to design the macro this is far as I got:
Qry Name: GetData
Table Name Storedata
Macro:
1st OpenQuery
Query Name: GetData
View: Datasheet
[code]...
The ? marks I cannot find any options in the macro actions catalog.