I have a Workorder table and a Workorder form. I would like to be able to make a Workorder closed when it is finished so that it is read only. I have a finished date field so maybe by entering a date there could be a way to accomplish this?
I want to "lock" a record in a table so that it is read only and cannot be accessed/edited/deleted. Is it possible to lock a single record in this way on a permanent basis? It's actually the first record in the table.
What's the easist way to set a record in a form to read-only if a check box is ticked? When going from one record to the next, the user needs to facility to change a record only if the tick box is empty.
I believe I may have asked this question before but…
I have a FE/BE database. Is there a way to set the tables as “read only”? I’d like the FE to be read only, but allow users to see all the tables, not just forms etc. However, if they open the BE, they would have full control.
Ok, what i have is a form on which a user has an Option Group for selection on which records are shown (consumable and Non-consumable), also on the form is a combo box which reads from Table Asset Categories. However what i want to do is allow this combo box to read from another table depending on which option is selected in the Option Group. ie change its Table and row source, but i can't figure this out. I thought something in the region of:
If Me.OptionGroup = 0 then recordsource = "Asset Categories" Else RecordSource = "Consumable Categories" End IF
Hey all, I need data in a table to be read only, once its inserted no one will be able to modify with the exception of a admin, how can i go about doing this/.
Ok, what i have is a form on which a user has an Option Group for selection on which records are shown (consumable and Non-consumable), also on the form is a combo box which reads from Table Asset Categories. However what i want to do is allow this combo box to read from another table depending on which option is selected in the Option Group. ie change its Table and row source, but i can't figure this out. I thought something in the region of:
If Me.OptionGroup = 0 then recordsource = "Asset Categories" Else RecordSource = "Consumable Categories" End IF
I have a Workorder form that I want to not allow edits, deletions, and additions when the Workorder is closed. Is there a way to program a button for this that could be password protected in case it needs to be reopened?
Hello! My Small access aplication has a tables appended from dbf database program. I am coping with an issue to set access to this tables as read only.For me its very vital that source dbf application won't be changed from MS Access.Thanks for help!
I have a main computer where my Access Application runs but I also want other computers with the application runnign on it but linked to the backend database on the main computer, however when linking to the tables they are only read only.
How do you link to tables accross the network so you can read and writ e to them?
I want to be able to open a Table as Read Only, so that a user can browse etc., but neither alter nor enter data - I want them to use the Forms for that. How then, using VBA code, do you open a Table as Read Only?
Now I have created the relationships between the tables for the various ID's. My issue is the following:
I will be automating this process, so when the data is imported to the various tables, I need the relevant keys from tbl_1 tbl_2 and tbl_3 to be added to tbl_4 when the new data is brought into the tables.
As to the process of importing the data, I was looking at using PHP to facilitate this. Any ideas, help or direction would be greatly appreciated. I have looked around the net for an idea of how to solve this, but, being so new, I am not exactly sure how to word the question.
Was wondering how i can import data from a file to a table in different fields. The data inside the file is described with the number of characters and space's between. The attached file has the data.
For example in the file attached, the first four characters represent a data like 'ticket number' and maybe the third line 6 to 10 charcaters represent 'name of a passenger'.
Now how do i import these data to a table into respective fields in a table.
I have a table that I imported from another database. I used import Access - Link to the table source by creating a linked table. - then downloaded in my database.
I want to use the linked table to create relationships and forms but do not want to even accidently edit it. The table gets updated in the database on a weekly bases and I am hoping it gets updated automatically in my database as well. does it automatically get updated or do i have to set up something?
Also, I want to protect the data in that particular table and either password protect it or make it read only. Can I do that? If so, how?
I have a brand new database in-the-works that is causing me headaches. For some reason, if I create a query and then exit and re-enter the database, I cannot re-open that query. I get an Error 3112 (cannot be read; no read permission on <name>) and to contact the administrator or creater of the database.
I'M the creator and the administrator on this thing - so why can't I get into the darn thing? I haven't added any security features. This has never happened before on any database I've created, so obviously, it's frustrating.
One of the common denominators between them is the URN which is auto-populated as it is an auto number field. My issue is that when I want to add a new record to the payments table using the forms (I can get to the payments form via the register form), I want to be able to identify the record that I am currently viewing within the register and auto populate the URN field with the same number. This is what I have done so far,
Option Compare Database Option Explicit Private Sub AttachPaymentDetails() Call PerformInsert("tblFinancialBudget", "frmFinancialBudget") End Sub
How to fill values in a new record with data from previous record?
I've total 11 columns in a table and values in 3 4 columns are repeating for few rows before it needs to be changed eventually. I want to fill these rows with values from previous record.
I have got problem with ms access report. I want to make a report which is based on
1) first master table 2) first slave table 3) second slave table
I have done some research and decided to do some form with subform. So I have got the view one record from master table and many record from slave tables in one view.
But it turned out that it has become duplicate records. (the relationship are ok - it duplicate master record as many as slave records)
So: 1) how i can do ms access report from multiple tables - one master record with multiple records form slaves tables
Currently I keep getting this error: "You cannot add or change a record because a related record is required in table"..My current tables are this:
Primary Table with persons info:
Primary Key - Auto number generated Name Address Email Phone
I have 4 other tables with use check boxes.
ex:
Table 1 - Geographic locations visited
ID - Auto generated USA CANADA ASIA ECT...
Table 2 - Languages Spoken ID - Auto generated Spanish Chinese English
Table 3 - Skills ID - Auto generated Hunting Dance Singing Weaving
Is this not a genuine one-to-one relationship table? I mean No two people would have had visited the same places and speak the same language no? I tried to create a one to one relationship with the primary key to the auto generated ID of the child tables but I'm sure that is not how you do it. Also when I try to save the check boxes in my form and I close it and come back it doesnt save and is blank again. Is it because my form gets its information from a query that takes all the information from all the tables.
how I can get this to work properly? Am i to make use of a foreign key? I've read a lot about it online and watched youtube videos but I dont see why I need it here in this case. Is there a way to set the IDs in the child tables to be the ones from the primary table? Or do I have to use a foreign key and manually input the primary ID into them?
Or would it be better to have all these child tables in the primary table and have one large table instead? I just didnt do that because one of them has like 20 checkboxes with cities and locations
I want to fill local tables in some application with disconnected recordset. The tables in the front end application having the same table structure as in the back end database. The front end application was linked with the back end password protected database tables. I want no connected linked tables in the front end application. How can I fill the local tables in the front end application with the back-end password protected tables?
I have a master table with about 40 fields. In addition, I created eight child tables with read only datasheet views of limited fields from the master table. The child table views are based on certain critera in the master table and are being refreshed by using delete and append queries tied to the On Current property of a form. By double-clicking a specific child record, a form is opened to allow editing of the master record. Also, I am using Referential Integrity and Cascade Update Related Fields to update the child table when a change is made to the master. However, I do not know how to add a record to one or more child tables when a record is added to the master table. The new child record would have to be based on the same critera that the append queries use so it gets added to the correct child table or tables.
I'm trying to get a DB to move records simultaneously using a command button. The records are setup with check boxes for example: one column has a check box for 1 Year Ratio the next column has a check box for 2 Year Ratio and the third column has a check box for 3 Year Ratio.
How can i move the information out from 3 Year Ratio into another table and then move 2 Year Ratio check into 3 Year Ratio check box and 1 Year Ratio check into 2 Year Ratio check box by using a command button.
I have a database for staff to request checks to be cut. I have one table with a group of regularly used payees & addresses. A second table stores data for each individual check request. I need to be able to copy a record from the addresses to the check request. I do not want to add all addresses to the address table, as it is only for commonly used payees. So from the check request table, I am able to lookup a payee, which opens the address form to display the address. I need to be able to copy the displayed address to the open check request form.