Tables :: Resetting Auto-numbering Field In A Linked Table
Sep 21, 2013
I have created quite a substantial and effective database for a small gliding club with all the major data tables being linked. I need to be able to re-index tables periodically so that running totals, which are needed to calculate statement balances, works correctly - all well and good. The only problem is that the process of re-indexing requires the data in the main table to be stored temporarily and the original data deleted. When the temporary data is appended to the main table the auto-numbering just keeps clocking up.how to reset the auto-numbering in a local table.
When they select Event 1 in the form I would like it to generate a unique Identifier within the range that Event 1's fall into. It would be an incremental increase for each Event 1 enterered. The same for the other 9 events.
The Event #'s are a quick and dirty way of knowing what type of event has taken place without reading any of the description. It is a requirement for this and I have no way around the Event #.
Is there a way to reset the auto numbering? I import new data then archive the old data. As I do this weekly my auto numbers are getting high and my users do not care for this aspect
I have 5 copies of a database that 5 users enter data into (including Pre, Post and Follow-Up information). These users send me their database quarterly and I am suppose to merge the data into one database from which to run reports, etc.
The problem comes in with the auto-numbering. Each "Pre" table has an ID that is auto-numbered. This auto-number is also stored when a corresponding "Post" (or follow-up form) is entered so that we can be sure the pre-, post- and follow-up are all linked to the same individual. When I merge the data, they are reassigned ID numbers in the Pre (while the Post still has the original Pre ID number) so now I've lost the link as to one individual's pre, post and follow-up form.
I realize now that the database shouldn't have been built this way, but is there any way to work around this. I've even tried exporting all of the rows for each of the 5 users into Excel and then importing them into Access in a new table (just so I could have the ease of running queries) but I seem to be getting errors doing that as well.
I have 5 copies of a database that 5 users enter data into (including Pre, Post and Follow-Up information). These users send me their database quarterly and I am suppose to merge the data into one database from which to run reports, etc.
The problem comes in with the auto-numbering. Each "Pre" table has an ID that is auto-numbered. This auto-number is also stored when a corresponding "Post" (or follow-up form) is entered so that we can be sure the pre-, post- and follow-up are all linked to the same individual. When I merge the data, they are reassigned ID numbers in the Pre (while the Post still has the original Pre ID number) so now I've lost the link as to one individual's pre, post and follow-up form.
I realize now that the database shouldn't have been built this way, but is there any way to work around this. I've even tried exporting all of the rows for each of the 5 users into Excel and then importing them into Access in a new table (just so I could have the ease of running queries) but I seem to be getting errors doing that as well.
I understand right off the bat if you're reaction is "don't duplicate data!!" -- mine would be too (don't fret, I know my normalization).
I've linked a table in my db to my Global Address Book in Outlook 2007 and, upon entering an employee number as a new record, would like to verify that the number entered is listed in the GAL and then pull in the associated name and location info.
The key is that I don't want this info to rely on the GAL going forward. For example, if an employee leaves or is no longer listed in the GAL, I don't want to lose the employee info (past data is needed for audit purposes). Note: I will be creating a report later to show if there are discrepancies between the GAL and my table, but that's another story...
So, what would be the best auto-fill options in Access 2007?
The situation is that I have a table named patient and a form named [patient1] where it holds a textboxs named "MFC_Seq_no" and another to hold [date], now, I manged to do a manual auto numbering for "MFC_Seq_no" using the following VB :
Private Sub Form_Current()
If Me.NewRecord Then On Error Resume Next Me!MFC_Seq_no.DefaultValue = Nz(DMax("[MFC_Seq_no]", "Patient"), 0) + 1 End If
Whenever user create new record, the system will automatically store the next number in the new record.
Now, I've be requested to code that system to start again from 1 as value for "MFC_Seq_no" whenever there are changes in date field (i.e. next day in the date field)
Is this doable and how?
Q2. how to duplicate an entire record with a subform, from another table, in it?
I have what is probably a stupid question but I've been struggling with this one for a while. I have an ordering database which has an Orders table (containing Order ID, Date, Supplier etc) and an Order Line table within which I have a combo box for Product name, supplier, price, VAT rate, Line price etc. At the moment, I have the order line table as a subform within the Order form (run from the Orders table). The problem I'm having is the subtotal and total fields. At the moment these are in the Order Line table as I cannot figure out how to get these in the Orders table. In summary, can I make a calculated field in one table that calculates values from another table (linked by Order ID)?
I am creating a database to keep up with the expenses for my art business. I have a table for Vendors with a field (Mileage) for one-way mileage that I enter manually (EX: 11.8 miles). Then I have a calculated field that basically just multiplies the Mileage field times two to get total mileage to and from my house to vendor location. (Total Miles) {The reason I want to do this this way right now is because I didn't keep up with my mileage this year and I am having to look up the distance from my home to each location)
Then I have a "supplies" table where I show the date, the vendor, the item, cost, etc, and I want to add a Total Mileage field based on the calculated Total Miles field in the Vendors table that will automatically populate based on the vendor of each transaction. I just can't remember how to make this work and I know just enough SQL to be dangerous.
We have a database (Access 2007) with several linked tables to an MS-SQL 2008 instance. All the text fields that I have issue with are nvarchar(255) on MS-SQL. The odd thing it will not allow a full 255 characters to be entered into the field. It will fail to save unless the number of characters is about 238 or 239 characters (not sure of the exact number of characters). It shows the field as a text and field size of 255 in Access .
Within my table if Field 1 has an answer of Self (from drop down), then, I would like Fields 6-12 to auto populate; however, if Field 1 does not have an answer of Self, then leave Fields 6-12 blank.
I am not quite sure how to lay this out. I am using Access 2010.
I have a number of tables (I know someone is going to say you don't need a primary field for these tables but I want to use one) that are basically lookup tables for combo boxes. Generally I use an autonumber to identify the ID of each record. There are occasions when all the records need to be changed (i.e. delete all old records) - does anyone know how I can programmatically (or otherwise) reset the autonumber from the last used back to "1" if all records from the table are deleted.
I have a make table query that deletes the old table every time the new one is made. However every time the new table is made it resets the field property for the “Date” field to “Text” rather than “Date/Time”
Does anyone know how I can avoid this problem please?
I’ve tried an update query but Access won’t allow me to perform the sum function that I require the actual query to perform. Any suggestions would be very much appreciated.
- Assets - Shifts - Machine Offline Date - Machine Offline Time - Machine Online Date - Machine Online Time
In the Asset Table I have recorded on each asset the number of shifts it operates for as well as starting / finishing time of those shift. e.g. 2 shift asset will start at 7:00AM finish at 11:00PM or 3 shifts asset will start at 7:00AM finish at 6:59AM
Now I have 82 assets in the factory and 20% of those machines run 3 shifts. Each shift is 8 hrs.
What I have already done is allocate shifts per asset e.g.
when I pick Asset (a) in the Asset combo box, in the shift box it will automatically generate 2 or 3 dependant on what I have set.
If an asset runs for 2 shifts, it would mean that, that asset is operational/running from 0700 - 2300 or 7:00am - 11:PM
also if an asset runs for 3 shifts it would mean that, that asset is operational/running from 0700 - 0700 or 7:00AM - 7:00AM
These are the scenarios that is entered through a "Form"
Scenario A: Machine (a) breaks down at 1700/5:00PM on the 10/7/15 and was back online at 12:30 on 11/7/15, This machine runs for 3 shifts which would mean in the "Breakdown Downtime" the result should be 19.5 hrs
Scenario B: Machine (b) breaks down at 1900/7:00PM on the 10/7/15 and was back online at 10:00AM on 12/7/15, this machine runs for 2 shifts which would mean in the "Breakdown Downtime" the result would be 23 hrs.
I would like to make this an automatic calculation, Is this possible?
Please note I am not after a "Query", I need this calculation in the main Database table named "Tbl_MaintenanceDATA".
I understand this is not the norm and many have suggested against this, however for the purpose of what I need, it needs to be in the main table with all the other data.
I have the following tables: Inquiry (This is the main table I want to populate through the use of a form) Programs
My question refers to two columns in the Inquiry Table Program Group
The program column is populated by a drop down menu that is linked from a programname column in the Programs table.
I I want is the Group column in the Inquiry table to autopopulate based on the selected programname (There is a group column associated in the Programs table) so the form field will be autopopulated.
What I have tried is autopopulating the form (form name is Inquiries) Field called Group by using =[Program].[Column](1) in the source code of the text box. This works well, but it then does not populate the main table.
I need to either - Learn how to populate the main table column called Group based on the form autopopulating or - Learn how to autopopulate the column Group in in the table so the form will autopopulate
We have two back end SQL Server databases accessed by VPN to a remote location using RDP locally. It is common to use MS Access as a report generation tool oftentimes containing linked tables from either or both db's and having Reports/Forms/Queries utilizing joins against tables from both SQL databases. Having to enter User Name and Password twice each time is more than a pain.
First a user would not have access to the MS Access report FE without first having appropriate and successful login UN/PWD to the remote server. Therefore having to login again when instancing reports/forms/queries against those linked tables/pass through queries is a minor pain. How or what process is used to tell Access to never prompt for User Name and Password? Or is there one? Kind of like telling MS Query tool in Excel to 'Remember Password'...
How to set up my tables as I'm just starting off with setting my database up.
I'm doing a simple database to track the purchase orders (PO) I am managing. Each PO has a PO Number and an Original Value. POs may have multiple amendments which would change the PO value. I would however like to keep the history of the PO original value and all different amendments.
So I created two tables:
tblPO: ID PO Number (Number) PO Original Value (Currency) PO Sum of Amendments (???????????) PO Current Value (Calculated = PO Original - PO Sum of Amendments)
tblPOAmendments: ID PO (Lookup from tblPO) PO Amended Value (Currency) Amendment Date (Date/Time) Amendment Desc (Text)
Now the two, million dollar questions are: 1.) Is this the right table structure to use. 2.) How do I go about calculating the Sum of Amendments field?
How I can create a sequential number in a field that looks like this:
Year-XXX-00
(Example: 15-100-00 -- the next sequential number would be 15-101-00)
I don't want to hard code the year, and the last 2 numbers must be entered manually.
It gets even more exciting --> this number has to be able to be duplicated in a table. Those last 2 numbers is a revision number. We might have a 15-100-00, 15-100-01, 15-100-02, etc.
i have a user permission table.that consists of PermissionPK, UserFK, CompanyFK. I also want the username to be automatically filled in?So when a user ID is filled in on the table, it also fills in what that UserID's Username should be?As i need both the UserId and Username text for code that looks at the Environ username.
I Have a table with 15000 entries. This table lists components we use. This table is used to generate queries/forms. I have been asked to add a hyperlink to this table to link to a drawing of the component. All the drawings are in PDF and in the same folder. I am looking for a way to automatically update the hyperlink fields all at once. The Hyperlink will be in the format of servershareddrawings12345.pdfwhere 12345 is the component name from the table.
But there are a few small problems with the component names. 1. If the component begins with a B- . The drawing name will be all the characters except when there is a second dash in the component. So if the component is B-12345-678 the drawing name will only be B-12345. 2. If The component begins with AB, The drawing will be the first 5 characters regardless of what follows, e.g. AB123. 3. Finally for all other components the full component name will be the drawing name.
Putting the naming to one side, how to go about auto generating the hyperlink. I have posted this in the table section, but maybe this should be in another section like queries or VBA.
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values?
Is there a feature provided by MS Access 2007 can enable such a conversion?
I have with my database. It's holds cost data including purchase made in foreign currencies which need to be converted to GBP using the correct exchange rate so a variety of reporting & stats can be performed.I have a table called Costs within which there are 2 fields
Purchase Currency Exchange Rate
I also have another table called Exchange Rates 13/14 within which there are 2 fields
Currency Exchange Rate
When a value is entered in the Purchase Currency field on the Costs table (this is a look up field linked to Exchange Rates 13/14 so it shows the listed currency in drop down) I need the database to automatically populate the Exchange Rate column in Costs i.e. match the value in the Purchase Currency field to the Currency field in Exchange Rate 13/14 and populate with corresponding Exchange Rate from Exchange Rate 13/14.I have tried the following and none work:
SQL Tried
1. UPDATE Costs SET ExchangeRate = [Exchange Rates 13/14].[Exchange Rate] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
2. UPDATE Costs SET ExchangeRate = [Exchange Rate] FROM [Exchange Rates 13/14] INNER JOIN [Exchange Rates 13/14] ON Costs.[Purchase Currency] = [Exchange Rates 13/14].Currency
3. SELECT [Exchange Rate] FROM [Exchange Rates 13/14] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
I know it is possible to have a drop down for Purchase Currency which shows 2 columns (both Currency and Exchange Rate) you can then use the exchange rate figure for a calculated field. The problem I have is that I am importing data into the costs table from excel. In Excel I can only have 1 value in the Purchase Currency column on the upload template. If I just have Euro in this column the database does not match it to the Euro in the Purchase Currency drop down and also store the correct exchange rate.
Or is the alternative to put this into the calculation of GBP Unit Cost where this somehow matches the Purchase Currency in the Costs table to the Currency field in Exchange Rates 13/14 tables and uses the appropriate exchange rate from Exchange Rates 13/14 to calculate GBP Unit Cost in Costs table.