Warehouse inventory system in access 2003. I have set up two primary tbls: Equipment and ETO (Equipment transfer order) both have an autofill primary key and the equipmentID is part of the ETO tble. There is a one-to many realationship from the equipment to the ETO. There are other tables (4) in the system but they are used as look-up tables and i'm not concerned about those.
Equipment Table layout: EquipmentID, ModelNumber, SerialNumber, Mfg, ProductName, CurrentLocation, Category. This table is used as the repository for all of the equipment that needs to be tracked and inventoried. It will not change much with except the CurrentLocation changing as the stuff is shipped around (in Store, In Warehouse) and of course when new equipment is being added.
ETO table layout: ETOID, ETONumber, FromStore, ToStore, OriginStore, ETODate, ModelNumber, SerialNumber, MfgID, ProductName, LocationID, CategoryID, EquipmentID. This table will be used (I hope) to basicly track the equipment as it moves from store to store to warehouse and back out again.
Process: Locate a peice of equipment by either SerialNumber or ModelNumber in the Equipment Table, change the location depending on it's status (coming in, going out) then i need to somehow update the ETO table with that ModelNumber, SerialNumber, Mfg, category, etc..But put in the FromStore, Tostore, OriginStore, ETODate, etc..
I have tried both the update query and append query from both tables but I can't get the results i need.
Hello! I am trying to update the current status of an asset, when it was returned or checked out. At the same time, save the changes in a history table to record all the changes in past. I can do individually from different tables and different forms, but I would like to do from one form and one record entry. Is it possible? If so can anybody help? Thanks JVirk
I have three tables: Vehicles; Vehicle Reallocated; and Vehicles Retired. I have a form that runs a query to find all the info in the Vehicles tbl that is not "Retired", not visible in the form. I then have the option to toggle to a Reallocated or Retired form. When i toggle to the reallocated form, i have the like fields in that table (ie Van #, Vin, Make etc) pulling the info from the hidden subform with the vehicle query, so i do not need to fill in repeat data. However, when i add a reallocated date and the new clinic that vehicle is for, i get the record ID for the vehicle reallocated table as expected, but when i save none of the data moved over from the query saves in the record?
How to get all the data on the reallocated form to save?
I have a query that I dump into a table...via Macro. I made changes in the table (User Input in some fields) ..can I requery and not overwrite the inputs? I am new to Access not sure if this is possible?
What is the correct way to save the values in a listbox column to the fields of a table? I can use rec("field1") = Me.list16.ItemData(Varitem)and that records the bound column to field 1 but how can I save the unbound columns to other fields in the table?
Some days ago I made it by using "query", but now I forget it how I make the relation on this situation. Here is my problem.I have 3 Table on mdb file, named Table: A, B, Status.Table Status have One Filed with 1 Data: Dishonor
Table A have three fields
Sl Number: (Auto Number) Status: Lookup wizard-data of (Table-Status)-Default Value is "Honor" Amount:Number
Table B have two Fileds Sl Number: Number Status: Lookup wizard-data of (Table-Status)
After Entering Some data on Table A it's Look like as:
Asl numberstatusamount 1Honor5222 2Honor855 3Honor988 4Honor7777 5Honor777 6Honor9999
[code]...
Now I want to change the Status of SL Number Honor to Dishonor so I fillup data on Table B is as like following
sl numberstatus 5Dishonor
Now how I can get the result as following by using query:sl numberstatusamount 1Honor5222 2Honor855 3Honor988 4Honor7777 5Dishonor777 6Honor9999 7Honor6666 8Honor7777 9Honor666
I am trying to update a record value in a table with a user supplied value.A user logs a test against a serial number (there are multiple tests per serial so the tests are numbered) and logs how many repetitions will be performed in that test. If a failure occurs and they have to abort the test, I want to change the number of repetitions from what was supposed to run, to what was actually run. So the user enters how many tests were actually run and the code is supposed to find the matching serial number and test number in my Test Runs table and replace the Run Scripts value with the user supplied update.
My code runs without error but the record doesn't update. I've changed my table value types from numbers to text without result, I'm thinking there might be a problem with quotation marks? So it's searching for serial "123-321" instead of 123-321?
My code is below:
serial = Forms("Enter Run Failure").Controls("Serial") runNum = Forms("Enter Run Failure").Controls("Run Number") abortNum = Forms("Enter Run Failure").Controls("txtAbort") Dim SQL As String
I have a database with 7 related tables. Now the main table is called STUDENT. I am essentially creating a report card system and have broken down each part of the report into another table. Now to make it easy for teachers I have created a form which they can search for a class and in a datasheet all the students plus their ID numbers come up along with the spaces for them to enter their grades etc.
The problem I have is this. How can I get access to look for any updates from the STUDENT table and apply this to the other tables as it would not do this automatically, even though they are linked one-many I have copied the data from the main STUDENT table into each other table just so theres a reference for a teacher. Is there any magic button or something that I can make to do this so all extra student names and IDs are added to all other tables?
Hi, i am trying to perform a beforeupdate event on a record, but seem to be getting an error.
The undo function works fine but it cannot save, i would be grateful if someone can help as the error is unclear.
Code:
Private Sub Form_BeforeUpdate(Cancel As Integer)
If MsgBox("Are you sure you want save these changes?", vbQuestion + vbYesNo) = vbYes Then DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70 Else 'user clicked no DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70 End If
End Sub
Error that i am getting.....
Run-time error '2115'
The Macro or function set to the beforeUpdate or ValidatationRule propety fot this field is preventing from saving the data in the field.
I have an Employee Records table with 29k records that I originally imported from an HRIS system. Lets call this table ORIGINAL table.Each week I export a new Employee Records table from the HRIS system as it contains the latest updated information. IE - New hires, terminations, rate changes, etc. Lets call this table NEW table. It likely contains new records as well as we hire 100+ people per week.
In the ORIGINAL table, I have added fields that are not included in the NEW table. I need to update the records / fields in the ORIGINAL table with the NEW table, but need to keep the ADDED fields.Originally my plan was just to overwrite the ORIGINAL table with the NEW table until I added the additional fields to the ORIGINAL table. I thought that I could export the added fields in the ORIGINAL table, import the NEW table, and run and update query based on the EE ID#.
I have a field in a table that is to be concatenated from two other fields, PolPrefix and PolNum. On a form I got it to show the full field 'PolicyNumber' by making the control source =[PolPrefix] & [PolNum].
But this doesn't update the field PolicyNumber in the respective table, and only shows it on the form. How do I get a concatenated field defined by the user into a table so that I can call that field other places in the database?
I have a table with certain parameters in, and I need to update it in a monthly basis with new costs. Basically, its a list of component costs which change on a monthly basis, and the query/report needs to pull the latest version. But, the old costs need to be kept for legacy/comparison purposes.
Having issues with getting auto update of Yes/No field dependant on todays date.
When users open the form the code runs through and checks all entries and updates the records if either of the dates in two separate fields is less than today. The issue I have is when some users are already using this form a second user cannot open it. Error shows other user information as having the form locked and code halts at highlighted spot below. Is there another way of ensuring this field is updated to Yes or No if the date in the field is less than current date.
Code: Private Sub Form_Open(Cancel As Integer) Dim rst As DAO.Recordset Dim dbs As DAO.Database Set dbs = CurrentDb
I created two tables, let's refer to them as Cars (VW, BMW and Audi) and Colours (White, Black and Grey).
Is it possible to create another table based on these tables - i.e. in the new table the rows will be the Cars and the columns the Colours as such:
White Black Grey
VW
BMW
Audi
And should I enter another Car or Colour in one of the first mentioned tables, then I would like this "new" table to update automatically. For example, if I have a new Car (say, Merc), then I would like the "new" table to update to the following:
Text0 = Textfield for ID Text2 = Textfield for LName Text3 = Textfield for FName
btnRet = Button for retrieve when ID is entered in Text0 btnUpdate = Button for saving the changes made in the textfields.
How can I search the ID from the Table I made? And when it was matched, get the details of that ID unto the designated text fields. It was like retrieving the data from the table with the ID typed in the text field from the form I made.
Then when it was retrieved, I can edit the fields and when I hit the Update button, the edited fields will replaced the original data.
Also after it was updated, a new record will be added in the history table that the ID was edited. Is is possible?
For now, i want to know how to retrieve the data with the ID and edit and save it after and update the table. Does it applies with the codes with the retrieve button and update button?
I wanted to get the autonumber ID before a record was saved to the table. My fields are on a form that is linked to the table. Maybe my solution is not the most elegant but it seems to work.
I messed around and came up with this solution: it creates the next record and captures the autoID then increments it and creates the record we will actually use. Since we know the current autoID we know 100% the next will be the current+1
Code:
' Code by Witchcraftz ' Button event to add new record Private Sub cmdAddRecord_Click() Dim strID As String
I have a form that I need to turn into a table. The table will be updated each day with new information but I dont know what to do to keep the previous days info. I have attached the form ....
I am creating a form that has a bunch of yes/no box for daily task. Is there a way for access to record which user selects yes/no.
For example
yes/no box1 - user 1 completed this task yes/no box2 - user 2 completed this task and so on
So when i look back i can see which user complete which task. I did a bit of research and saw that i can save a user that update a record. But since this is a daily task, each new record will be a new day.
Private Sub Save_Click() If IsNull(cboEmpName) Then MsgBox "Please Select Employee Name" Me.cboEmpName.SetFocus End If If Me.txtNoofDaysWorked.Value = "0" Then MsgBox "Please Enter No of Worked Days"
I have a form with two tables referenced. I am using the form only to update one of the tables. I am using the other table to pull a reference field. When I add my second table using the query builder, it makes it to where I can't edit/add in my form. I assume its because of the SQL insert statement, but I don't see this statement and can't find where it is to edit it. How to have the form only update one of the tables, while just using the second table as a reference for a field?
I have started work on a database to track the many (several hundred per annum) projects my company undertakes. A 'main' table lists projects, their fees, their key dates, their project numbers, etc. I have created another table for tasks. Each task is assigned to a project (via the project number), and may be 'open' or 'closed'. I have separated the tasks table from the projects table as there may be several different tasks for each project. It is also good to keep a record of the tasks.
I want to prepare a report from the projects table that lists projects IF they have any open tasks.
In my mind, this means 'If a task, with the corresponding project number, is open, put a 'Yes' in the 'Tasks open' field of the Projects table.'
Under Current Database, I have "Overlapping Windows" checked. When I open a table, it opens to pretty wide. Then I resize it so that it takes up less space. After resizing, whether I click Save or not, after closing, then reopening the same table, it opens back to its original size (very wide), instead of opening at the smaller size that I resized the table to.
Is it possible to resize a table, and get it to open at that size next time you open that particular table?
I have created single form and 7 different tables. In my form I have a combobox which have different branch names (Table names are as per combobox values). Now what i want to do is whenever I select a branch name from combo box and click on the save command button the particular record should be saved in particular table.
One of my tables has a couple of OLE Object fields. This has embedded Word, Excel, and PDFs. I'd like to know if there is a way to export these to a folder. Ideally, I'd like to save them with the record id and then a dash and then the file.
The fields are Attachment1, Attachment2, and Attachment3
When I view the table for these fields, if it's a word doc all I see is "Microsoft Word Document".
