i have a table that holds "course codes" with the corresponding Module title and module codes, and assessment titles and codes that are used in each of the courses, so I have a few records that will go against one course code. I have forms set up with subforms, with the same general details on the top of each as the main details, and each of the subforms giving different information. But, for four of my subforms, I need to pull information from this table with the module title, module codes, assessment title and codes. possible to have these certain columns appear across four subforms, and what is the best way to go about it, I was thinking of using lookups?
I have recently been modifying an existing Access 2007 database, everything seems to be working correctly, except that the main table holding most of the data is acting strangely.
If opened in database view, it is completely blank - no column headers, no data. Record count is correct and I can step through/select records, but there's just nothing visible at all.
The data clearly still exists as it can still be viewed in forms / queries / reports.
Only thing I can think of is that I have deleted a bunch of outdated queries & reports and it's possible that one or more of them may be cross-referenced with the table in another query, but still can't see why that should be causing this problem.
i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
How can i see the most frequently used data in a field?
For example if i have years put in a field, how can i see what is the most frequently used year and also how many times it's used? It will be a plus if i can see all the years in order.
Also if i have one field and in that field i have more than one name, can i find again which is the most frequently used name?
I have a feedback database with 3 tables, one for complaints, compliments and other. They have the standard common fields such as name, address, date received, nature of enquiry, investigating officer etc etc.A person can have more than one record in the complaints table and that same person could also have 1 one more records in the compliments and others table. What I would like to do is to be able to display the data for that same person that appears in the complaints, compliments and others table in a report using a search facility by either name or address. This will therefore display the number of times that this person has made contact together with dates and the reasons.
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
I have created a database table with 100+ fields with data. I now need to insert an additional 33 fields that will have a static default value between 1 and 33. I have already inserted the Line # field in the table between every 6 fields and gave it a default value. I now would like the existing database to update and reflect the new changes that were made for the new inserted fields.
i have created a Union sql Table View, that i have connected to in access. Its a list from 5 different companines of Supplier accounts. I need to create an autonumber for this table? Not sure if this may be more SQL based than access
SELECT PLSupplierAccountID AS AccountID, SupplierAccountNumber AS AccountNumber, SupplierAccountName AS AccountName, 'RWL' AS Company FROM Roth.dbo.PLSupplierAccount UNION ALL SELECT PLSupplierAccountID AS AccountID, SupplierAccountNumber AS AccountNumber, SupplierAccountName AS AccountName, 'FAH' AS Company FROM FAH.dbo.PLSupplierAccount UNION ALL
I have a table that contains many column but one of the columns is the "Collected Date". the dates entered in this column in in this format: 2013.10.28 however I to upload this table in another software to analyse, I need the date to be in this format: 10/28/2013 I already tried changing the format in the design view but since the format is currently in text it does not allow me to change the format into date!
In a table I have three fields 1. City - which is a combo box linked to a query, 2. State - a text box, 3. postal Code - a text box
When i put them on a form I use the info selected in the City box to populate the info in the State and Postcal Code boxes.
The Control source for the city is SELECT tblPostcodes.ID, tblPostcodes.Pcode, tblPostcodes.Locality, tblPostcodes.State FROM tblPostcodes;
Then on the form i put the control source of the state box as =City.column(1) and Postal code as =City.column(3)
This works fine on the form- and the information is retained - but the datasheet view of the table does not record either the State or the Postcode data that was entered. Is this because I put the control source on the form and the table is not recognising it? if this is the case how do enter it from the table?? really confused...
I have some issue when i save list view data in a access table.In form I have a list box(listtotalcount) and one text box(ID). In form load event I run a query on that list box like: "SELECT count(id) FROM table A" and it gave me the correct result. Now I want to store this data on a different table (table b) and I use this code:
Dim db As DAO.Database Dim rst As DAO.Recordset Set db = CurrentDb Set rst = db.OpenRecordset("table b", dbOpenDynaset)
[code]....
But the problem is when I click the save button it store only id not the list box value.
I have a subform (studentmodules) which should pull data from two tables (hea) and (hea courses). Hea table contains the course code, title, level of study and award, Hea Courses contains the start dates, location, cost and tutor etc for each intake of the course.
When I enter data into the Student modules form I can type in the HEA number, and then have to choose the course title from a very long drop down list (which doesn't seem to work for some reason as values do not stick) and then enter the award and the level of study. I am able to enter the information relating to the course intake, and this automatically updates the information in fields relating to start date, coordinator etc.
How do I get Access to do the same for the HEA information.
First of all, I'm kind of a newbie to all of this, but not entirely, bare this in mind please ;-) Also I'm from the Netherlands and my english might be a bit rusty, so bear with me if you please.... :-)
I'm having a problem for which I cannot seem to find a solution. Below I've outlined the situation:
I have a couple of tables up to now:
CustomerTable CaseDateTimeTable CaseTechInfoTable
CustomerTable has got a primary key: Clientnumber CaseDateTimeTable has primary key: Casenumber CaseTechInfoTable has no primary keys.
CustomerTable only includes (apart from all adress info etc) the clientnumber field which is of importance in this case i think. CaseDateTimeTable includes both Casenumber and clientnumber. CaseTechInfoTable also includes both Casenumber and clientnumber. Only both other tables have Primary keys, and this one doesn't.
I've created a relation between CustomerTable - Clientnumber and CaseDateTimeTable - Clientnumber. Another relation I've made is between CaseDateTimeTable - casenumber and CaseTechInfo - casenumber.
Now, I have made a form in which the name and adress data is fed into the database, in normal form view. Below these textboxes etc. I've created a SubForm in datasheet view in which the existing cases from the at that time selected/displayed customer should be displayed. At the moment only fields from the CaseDateTimeTable can be displayed, but I would also like to display some fields from, for example, CaseTechInfoTable in that same subform.
But how?
When I create a (sub)form via the wizard and for example select: CaseDateTimeTable - clientnumber CaseDateTimeTable - Casenumber CaseTechInfoTable - Problem description
and display these fields in the subform as a datasheet, then the separate cases from each customer are not displayed. I have 5 clients in my test dbase, just about all of them have 2 or 3 cases associated with them. In the example above only the data from two clients is displayed and then only from 1 case each, not the actual amount of cases. So for example:
clientnumber 4 has casenumber 5 and casenumber 6. But only casenumber 5 is displayed. The same happens for clientnumber 2, he has casenumbers 9 and 3 but only casenumber 9 is displayed.
The strange thing is though, that when I create the same (sub)form in datasheet view, but only use fields from the CaseDateTimeTable all cases per client are nicely displayed in the subform.
Why? And how do I solve this problem? I need to solve it so that I can add data from other tables into the subform later on so a nice overview of certain important data can be given per customer per case, even before the case form(s) is/are opened.
I've tried making a query and base a form on that, but for some reason I can't get the query to display all my customers, let alone all cases associated per customer. In the past I have made another (smaller and simpler) database for which I also made a lot of queries. But now? Pff... I'm lost at the moment.
I have a table called NewTransactions_tbl that I have been using for some time. I am trying to add a new field called CustomerProjectNumber. It's not being displayed when I look at the table view. I've attached an image showing the settings for the field. I am probably missing something obvious.
I have got problem with ms access report. I want to make a report which is based on
1) first master table 2) first slave table 3) second slave table
I have done some research and decided to do some form with subform. So I have got the view one record from master table and many record from slave tables in one view.
But it turned out that it has become duplicate records. (the relationship are ok - it duplicate master record as many as slave records)
So: 1) how i can do ms access report from multiple tables - one master record with multiple records form slaves tables
I have a Traits table that has fields TraitKey and Trait and I'm looking for the subform to show one record for each trait so that I can give the employee a score for each trait.
I'm trying to save that score in an EmployeeTraitScores table that has the fields EmpID, Trait, Score.
If I bind the subform to the traits field, the continuous form shows each one properly but then I don't know how to save to the scores to the EmployeeTraitScores table.
If I bind the subform to the EmployeeTraitScores table then it can save a record but I can only get the Dlookup to show the first trait.
When I started building forms to fill my junction tables, the example that I looked at based them all off of queries. That's what I've done for the most part. However, this latest subform that I've made and embedded into a main form is based off of a table. Will that cause problems for me down the road? I'm not so far with it that I can't redo it off of a query, I just don't want to!
Some days ago I made it by using "query", but now I forget it how I make the relation on this situation. Here is my problem.I have 3 Table on mdb file, named Table: A, B, Status.Table Status have One Filed with 1 Data: Dishonor
Table A have three fields
Sl Number: (Auto Number) Status: Lookup wizard-data of (Table-Status)-Default Value is "Honor" Amount:Number
Table B have two Fileds Sl Number: Number Status: Lookup wizard-data of (Table-Status)
After Entering Some data on Table A it's Look like as:
Asl numberstatusamount 1Honor5222 2Honor855 3Honor988 4Honor7777 5Honor777 6Honor9999
[code]...
Now I want to change the Status of SL Number Honor to Dishonor so I fillup data on Table B is as like following
sl numberstatus 5Dishonor
Now how I can get the result as following by using query:sl numberstatusamount 1Honor5222 2Honor855 3Honor988 4Honor7777 5Dishonor777 6Honor9999 7Honor6666 8Honor7777 9Honor666
I have three tables: Vehicles; Vehicle Reallocated; and Vehicles Retired. I have a form that runs a query to find all the info in the Vehicles tbl that is not "Retired", not visible in the form. I then have the option to toggle to a Reallocated or Retired form. When i toggle to the reallocated form, i have the like fields in that table (ie Van #, Vin, Make etc) pulling the info from the hidden subform with the vehicle query, so i do not need to fill in repeat data. However, when i add a reallocated date and the new clinic that vehicle is for, i get the record ID for the vehicle reallocated table as expected, but when i save none of the data moved over from the query saves in the record?
How to get all the data on the reallocated form to save?
I am working from an existing database which is just two table. The main table has a massive amount of redundancy and duplication and needs splitting into, at first glance, 5 tables.
After I have run my various make table queries and added a Primary Key and FK field to the new tables how do I populate the FK with the Parent PK.
I thought I could simply add all the fields from the new table and then create an adhoc join in an update query to populate the PK to the FK. When I do this however I get "You are about to update 0 records"
I have tried the table analyzer but it doesn't give the correct options to split the table the way I need.
I have linked a SQL table to my ms access database. In order to view the SQL table as read-only and still be able to update the access table I have setup a form with a subform. I know it would be a dublication of data but is there a way thru code of copying the data on the subform to my access table. I was hoping I could put a button on the form that would copy this data. My idea is after the copy is done all the information I need will be in my access table. I'm new to this linking idea and am worried I will only have half the information I need if the link breaks etc. Thanks
I want to append/populate all data from one table to subform?
It is possible?
I managed to populate data from one table to another but my relations between form and subform isn't good, because record that is supposed to be filled as the "link master fields" is left blank.
