I'm using Access 2010 and am trying to pass a variable in a form field and store it in a table i.e. I have a customer database with various fields: Customer_ID, Customer_Name, Customer_Address etc. After selecting a particular record i.e. Customer_ID = 20 l need to store the record number '20' in a temporary table. I presume that l could then use Dlookup to read the info back at a later stage.
View RepliesI am trying to write to different tables depending on a user selected variable (ie: depending on the year selected, the data would goto the correct table). Am I able to setup my fields in my forms to reference a predefined variable, then from there write the data to the correct table? Any help or suggestions would be greatly appreciated.
View 6 Replies View RelatedThis is the first time that I have done any major work with forms. After I thought I had finished a problem came up. There are several forms that are use to input information into a table. When the form is opened it grabs an automated number for tracking. The problem is, that if the form is opened and then closed it creates a line of data with all null values.
What I would like to do is have the form open, the user fills out the information, and upon pressing the "save" button, the data will save to the table. I think I need to have each text box write to a variable and then save on the click event. Or I could be completely wrong and need to do something else.
i'm guessing this is something I would learn in Forms 101 if i had ever taken that type of course
Thanks
I'm trying to write code which writes text into text boxes on a form depending of certain content of other text boxes. The names of the text boxes are all very similar
F.i. R1, R2, R3 ...... R12 if the content of these boxes are empty then the content of the corresponding text boxes VR1, IR1, VR2, IR2, VR3, IR3.......VR12, IR12 should also be empty.
In fact I am trying to write something like this
DO UNTIL i=12
if me.R(i).value = "" then
me.VR(i).value = ""
me.IR(i).value = ""
endif
LOOP
But this isn't working. The solution below works but isn't a very nice one, writing 12 times the same code
if me.R1.value = "" then
me.VR1.value = ""
me.IR1.value = ""
endif
if me.R2.value = "" then
me.VR2.value = ""
me.IR2.value = ""
endif
I some code that is reading the first 32 lines of a text file and paste the results into 1 text box on individual lines. I would like each line to go into an individual text box.
I have 32 text boxes named txt_1, txt_2, txt_3
I have a variable named ThisLine holding the line of the text file.
I have a variable named textBoxName holding the name of the control.
Need to putting these together to write the line to a text box .
Code:
Sub ReadFile()
Me.txt_newData = ""
Me.txt_OrigData = ""
'again, we need this strange thing to exist so that ...
Dim fso As New FileSystemObject
[Code] .....
I'm quite new to Access and am just working on a little practice database where I keep track of sales of a product.
Basically I have a table keeping track of the different types of products, a table keeping track of customers, a table for orders and one for replenishments of stock. I have a query that calculates the stock of each type of product based on replenishments and sales.
Now I want to make sure that a customer can't order any more than there is in stock. I know you can restrict what's entered into a table with a validation rule but that's only for static restrictions. After searching the internet for an answer I've pretty much learned that I can't really make this restriction directly in the table, correct? But then how can I achieve this? Do I have to restrict the amount through a form somehow?
I am building forms from a large questionnaire and I need to write to 2 tables from one field in the form. How can I do this?
The reason I need to do this is because I have over 255 variables so I needed to create 2 tables. I want to write my case number to both files so I will have a link between the 2 files. Thanks.
I'm running pro bono a linked file database for a wildlife hospital in Australia. I have a Form in which there are several fields for vets to enter data about a wildlife patient. One of these is the Collection Plan (for the patient). This is a memo field from the TBL_Accession. The Collection Plan is written in straight English on the input form, but the data entered into the table is completely reversed, reading "etinuer ot ovra siht pu/p ot ronod". Translation for the line here is "donor to p/up this arvo to reunite".
View 2 Replies View RelatedEmployees submit information into a form which translates the information into a table. The table has been in use for years. By accident some employees were writing to an archived table while others were writing the the active table. This resulted in a field called "WorkID" being duplicated across the two tables.
Bottom line I am trying to write a query finding duplicates across tables but basing the duplicate only on certain columns.
Hi,
I am fairly new to msaccess programming and am trying to build a stock control system for my business.
I am happy with everything I have done so far but there is one thing I cannot figure out.
I have set up so that the user can click a button and remove the relevant number from the stock level. The buttons are for removing 1, 5, 10 or 20 (there are reasons for these numbers). However I would also like the button to take information from the form (which is referenced to a query) and write that information, along with an autogenerated id number and the current date/time to another table. This is for our record keeping, so that we can record what is selling well etc and when the last one was sold.
How do I do this?
I have gone through the help files and my books, but I think the problem is I don't know where to start looking.
I also want to add a button that will add items to an order table. Again by taking the information from the form and writing it to another table. With this one a message will appear asking for the quantity to be entered. It will also check the order table to see if the item is already there and advise if it is.
Any help gratefully received.
Steve:confused:
I hope this makes sense?
I have a main form with a button that opens a new form. On the new form I have 5 fields. 1 of those fields is the Employee ID which I have the form getting from the main form (IE the Control Source is =Forms!Search_Employee!Employee_ID )and the other fields are bound to my table for the new form. I am unable to get the Employee ID to show in my table, it is not updating or writing the value to that field. Not sure if there is code or how I should or can get this field to write to my table. Any Ideas or be very appreciated. Thanks anyways guys I igured this one out. I was able to set the dafault value to point ot my main form so that my Control Source could point to my table and it worked.
Hi,
I have a check box that gets ticked when 'work complete', it adds the parts/service totals and fills in the 'parts total', 'vat' and 'total' fields.
This works fine but I need it to write the values to the table as well rather than just displaying the values in the fields so reports can be produced etc.
Anyone know the easiest way to do this?
Thanks
Housey
Hi all,
wonder if anyone can assist me with this the SQL Server
security/write (?) issue. The SQL Server Admin has created a table for our Dept. to use and via SQL Server I can get access to it using the username and password she supplied to me. I can also link to this table in Access 2002 via ODBC which is the way I am using to write to SQL server tables. I have developed an Access application to allow one of our staff to be able to write data to the SQL Server table at a click of a button, however when I open the table the 'add new record' button is greyed out, I can not add any data to the table.
I explained this problem to the Admin as well as the way in which we access the table and she is certain that the problem lies in Access but i'm unsure how that can be the case.
Has anyone experienced this problem before ? Is there a fix and if so how is that implemented ?
Should I also post this in the SQL server forum ?
Thanks in advance,
Mitch....
Hi all,
I need to figure out how to have two calculated fields written to the database table instead of just being displayed in the form.
The user selects a number from 1 to 5 in the first field, and a number from 1 to 7 in the second field. The first calculating field multiplies these two numbers and displays the result. The second calculating field determines where the resulting number fits in three ranges of numbers and displays the result as Low, Medium, Or High.
My problem is the calculated results are be displayed in the form but not being written to the table. I cannot create a report to display all the High results, etc.
How do I update the calculation field formula to write the results into the table so I can create queries/reports on the calculated data?
Thanks,
bugleboy62
Can anyone tell me what's wrong with the below statement ? I'm trying to pull the contents from a text box in a form. The text box is supposed write the contents to a field (memo data type) in a table. Thanks ! ! !
strComments = Forms![Payroll History]![Comments].Column(0)
Hi Guys, I don't know Access very well but I know enough to generate a 2 dimensional database. The problem I have is that I have been asked to look at a travel agents database to create some additional letters. The problem is that they use a form which has an underlying data table called customers. When they create a record in the form all fields in the customers table are filled in except those on the form which derive their data by calculating two or more fields i.e Date Due is [Date of Travel]-70 (days), Balance Owing is [Cost]-[Deposit]. None of these derived fields fill in their corresponding fields in the customers data sheet.
I would welcome any ideas please. Thanks in anticipation
PompeyFC
I am trying to write some fields to an access table definition. It is working for the most part except that I want to write some of the fields as dbText and others as dbDate. For some reason it is writing all of them as dbDate and I don't know why.
Code:
additionalColumns = Array("a","b","c","d","e","f")
'add additonal columns to report
For i = LBound(additionalColumns) To UBound(additionalColumns)
MsgBox additionalColumns(i)
If additionalColumns(i).Value = "a" OR "b" Then
Set columnNames = xlsht.Cells(1, additionalColumns(i))
Set FieldName = tb1.CreateField(additionalColumns(i), dbDate, 10)
tb1.Fields.Append FieldName
Else
Set columnNames = xlsht.Cells(1, additionalColumns(i))
Set FieldName = tb1.CreateField(additionalColumns(i), dbText, 150)
tb1.Fields.Append FieldName
End If
Next i
I need to create a table with names of controls on my forms.
I'll use that table to apply user rules.
Any solution to write the table automatically using VBA code ?
I know how to populate a combobox...
DoCmd.OpenForm YourFormName, acNormal, , , , acHidden
Dim c As Control
For Each c In YourFormName.Controls
[Control-Name].RowSource = [Control-Name].RowSource & c.Name & ";"
Next c
..., but not how to write a table.
I concatenated 2 fields CR_Numbers: = CR_Number & [Sub Number] to display 12.01: from 12 and 1. I am now wanting to lookup the CR_Numbers to edit or add information into other fields.
I want to use a pop up form to edit/add data without having the form add an entire row to the table. How do I reference the Table ID so that it will go to the equivalent row to add the data in?
Main Table = Change Request
Email Table = AORB_Email
Fields in Form!AORB_EMail: Change Request (CR_Numbers), Priority (Pri_Name), Hours (Hour)
I plan on using the Priority and Hours in the email to set some dates and expiration times as well as in the subject of the email. I have figured out the email setup, and if I manually fill in the Priority and Hours fields everything works as it should.
i would like to sum all the column fields in a tables column where an id is the same as the id in that table.
I know you can use the SUM function in the select statement of your query.
But how can i set this sum result into a variable, so i can use it for calculation further on in the program?
I work with Access 2010
I am using Access 2010. How do I prevent the object typed into the textbox on a queryform being written to the table. The result from the name typed into the textbox on my query form correctly produces the result from the query, and my macros then produce the correct report, which I can either print or close due to the controls in the heading of the report. However, when I view the table, the name typed (only) has been inserted into the correct field as a new record in the table. Is there a macro I can add (I assume to an event in the query form) to prevent this happening?
View 8 Replies View RelatedBasically, I originally wanted to create a form which I can input data into Access with by using a button (I was unable to get Access to append the information from the forms to the table, so it didn't work out!). I did not want the fields on the form to be linked to a table, as then a record (and most importantly an auto-number) is created as soon as somebody starts typing. Should somebody stop typing halfway through and quit the form an autonumber will have been generated, which makes the number of "users" seem higher than it actually is. I got around this by changing the field from autonumber to number and then creating a query that selects the maximum value of ID in the table, then adds 1 to it (which is essentially the lowest unique number. I tend to call this newID).
The problem I now have is setting this to be written to the table alongside the data from the form (the rest of the fields on the form are now connected to the table, as I am no longer using an autonumber). I have tried the following: Setting the form to run the expression "[ID] = [qryMaximumUserID]![NewID] " on load. This returns the error "The object doesn't contain the Automation object 'qryMaximumUserID.' Setting the control source of the text box to be dLookup. This fills the textbox with the correct value, but then it doesn't write it to the table! Setting the default value of the field to be 0, then running an update query to update any ID of 0 (criteria "0" to the value of newID "update to: [qryMaximumUserID].[NewID]. "). However this doesn't work as whenever the query is run it asks for a parameter to be entered, rather than just taking the value from the other query. Writing a macro that is run on load to SetValue of item:[ID] to expression: [Forms]![qryMaximumUserID]![NewID]. However this returns an error "Microsoft Access cannot find the referenced form 'qryMaximumUserID' you entered in the expression.
I am periodically importing Excel files into access.Making the data usable requires removing spaces, parsing certain fields, adding datasource field, etc. Currently, I am importing the un-formatted data into a staging table, cleaning it up with a query and then copying the updated staging table to the final table.
View 2 Replies View RelatedHoi,
another question...
know about linked tables. Is it possible to put the referadres of the linked table in another table (tblserver). If this table is changed all the linked tables will refer to the new location.
Is it also possible to run script that examine of there is a connection with database one if not make a connection with database two.
greetings
Koen
I am creating a 2 level report to confirm an order. Main report already created, runs successfully called as subform/subreport under "OrderDetails" form. Linked to master using Order.ID. There are two versions of the confirmation report that have different layouts for different program types.
The hangup comes when I try to add a "Class Dates" subreport. It lists dates of individual classes and Skip dates. I have created the subreport as "srClassDates". When I add it to the main report, it lists the records. However, when I try to link it to the Main report, an error message box appears with the "object variable or With block variable not set".
I have tried rebuilding both the main and subreports, rebuilt the query, have not found anything that changes the result.
Linker has been working successfully on other subforms. Report with groupings works fine, but I need data from 2 tables both linked to order.id.
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?