Tables :: Datasheet View Of Table Inside Subform Not Showing Sorted Data
May 25, 2015
I have a linked table(tblxyz) having property set as ORDER BY ID DESC, ID is autonumber, so my table view gives me latest record on top.
Now I have a subform , where i am calling this Table.....
[Forms]![MainForm]![Sub_DisplayFm].SourceObject = "Table.tblxyz"
This gives me datasheet view of the table inside subform but its not showing sorted data
Interesting thing is it give sorted data view when my table is not linked and is in same access file.
View Replies
ADVERTISEMENT
Dec 21, 2004
In a table I have three fields 1. City - which is a combo box linked to a query, 2. State - a text box, 3. postal Code - a text box
When i put them on a form I use the info selected in the City box to populate the info in the State and Postcal Code boxes.
The Control source for the city is SELECT tblPostcodes.ID, tblPostcodes.Pcode, tblPostcodes.Locality, tblPostcodes.State FROM tblPostcodes;
Then on the form i put the control source of the state box as =City.column(1) and Postal code as =City.column(3)
This works fine on the form- and the information is retained - but the datasheet view of the table does not record either the State or the Postcode data that was entered. Is this because I put the control source on the form and the table is not recognising it? if this is the case how do enter it from the table?? really confused...
View 2 Replies
View Related
Dec 10, 2012
I have recently been modifying an existing Access 2007 database, everything seems to be working correctly, except that the main table holding most of the data is acting strangely.
If opened in database view, it is completely blank - no column headers, no data. Record count is correct and I can step through/select records, but there's just nothing visible at all.
The data clearly still exists as it can still be viewed in forms / queries / reports.
Only thing I can think of is that I have deleted a bunch of outdated queries & reports and it's possible that one or more of them may be cross-referenced with the table in another query, but still can't see why that should be causing this problem.
View 2 Replies
View Related
Jan 1, 2013
i have a table that holds "course codes" with the corresponding Module title and module codes, and assessment titles and codes that are used in each of the courses, so I have a few records that will go against one course code. I have forms set up with subforms, with the same general details on the top of each as the main details, and each of the subforms giving different information. But, for four of my subforms, I need to pull information from this table with the module title, module codes, assessment title and codes. possible to have these certain columns appear across four subforms, and what is the best way to go about it, I was thinking of using lookups?
View 1 Replies
View Related
Apr 6, 2006
I have a form which is opened with a filter from another form. For some reason it views the form in form view, although it was set up as datasheet view. I even went to the form properties and the default was datasheet and i made it not to allow other views. This still didnt solve it. I want it to be in datasheet view because i want to show multiple records at the same time.
If u kno how i could resolve this please offer ur help
thanks
View 6 Replies
View Related
Jul 19, 2007
See title :)
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
View 4 Replies
View Related
Jul 17, 2006
Hi. I am trying to create subform in datasheet view with one column (total 3)as drop down list. Is this doable? Thanks.
View 3 Replies
View Related
Jan 5, 2006
I have a subform that is in databsheet view. When the user logs in to the db it sets the global variable with the group level they have.
I would like a column to be hidden for a certain group of users and have tried the following.
On the subform opening event i have
if vlevel = "engineer" then
me.Hours.columnhidden = True
Else
me.Hours.columnhidden = False
End If
And i have done the same on the Main Form open event identifying the subform by Form!Subform![Hours].columnhidden = True
But neither worked.
Can any suggest something.
View 4 Replies
View Related
Jul 25, 2006
Can anyone tell me how to manipulate a single cell in a datasheet view, or if it is even possible?
View 3 Replies
View Related
Jul 2, 2007
I have a table called NewTransactions_tbl that I have been using for some time. I am trying to add a new field called CustomerProjectNumber. It's not being displayed when I look at the table view. I've attached an image showing the settings for the field. I am probably missing something obvious.
Any ideas why it is not showing?
I am using Access 2000.
View 7 Replies
View Related
May 30, 2014
What I have is a database setup with multiple tables in which different areas of my DC can input information simultaneously into their respective tables. I then have another database linked to it for myself to have a live view of each updated record. I would like to see all the records of each table in 1 single table (possibly just sorted ascending by time). Each table has the same Field headings but may have different qtys of records. As I will then have it linked to an Excel table to VLOOKUP from it.
I have tried Union coding but always get Syntax Error etc.
View 8 Replies
View Related
Jul 19, 2006
I have a small issue with the before update event, it is triggered for every record of my subform in datasheet view rather than just once when the user leaves the subform.
I have a module which is called from my form and all the subforms. It tells the user that changes have been made to the record and gives them the option to undo. This is to prevent accidental editing when viewing records. This works fine, but sometimes the user must enter a number of records in a subform and so they must answer the message box every time.
Is there any relatively straightforward way to accomplish the warning and undo when the user leaves the subform rather than the individual record in it?
A quick attempt at lost focus and before exit demonstrated that these were not the way to go.
For reference, here is the before update code and the module
Option Compare Database
Option Explicit
Private Sub Form_Before Update(Cancel As Integer)
On Error GoTo Err_Handler
Call Confirm_Change
Exit_Here:
Exit Sub
Err_Handler:
MsgBox Err.Number & " - " & Err.Description
Resume Exit_Here
End Sub
Option Compare Database
Option Explicit
Public Sub Confirm_Change()
On Error GoTo Err_Handler
Dim Msg, Style, Title, Response
Beep
'Define message box
Msg = "You have made changes to this record. " & Chr(13) _
& Chr(13) & "Click 'Yes' to save changes " & Chr(13) _
& Chr(13) & "Click 'No' to undo changes "
Style = vbYesNo + vbExclamation + vbDefaultButton1
Title = "Record changed - Confirm save" '
'Check which button pressed
Response = MsgBox(Msg, Style, Title)
If Response = vbYes Then
MsgBox "Record has been updated with your changes", vbOKOnly, "Record saved"
Else
DoCmd.RunCommand acCmdUndo
End If
Exit_Here:
Exit Sub
Err_Handler:
MsgBox Err.Number & " - " & Err.Description
Resume Exit_Here
End Sub
View 2 Replies
View Related
Oct 31, 2014
I have recently added a subform to a form and wish to display the subform in Datasheet view. Whilst I can get the proper data and headings to display, I cannot figure out how to get the column widths to persist. I can adjust the column widths while in (main) form view right on the subfirm columns themselves but after I save and reload the main & subform form, the widths revert to some sort of default value.
I have also tried adjusting the columns in the subform's associated data table itself as well as adjusting the text box widths when the subform is displayed in Form view but it does not affect the column widths when the subform displays Datasheet view.
What is more annoying is that I have another subform in which I was able to make the Datasheet view column widths persist but I don't seem to be able to properly recall how I did it.
View 2 Replies
View Related
Oct 8, 2006
Hi,
I have a query (SelectedData_Query) , on which a form (SelectedDataQuery_SubForm) in datasheetview is based, which is placed on a form (NAWInvoerForm) where customer adress data is put in. When someone clicks new case button on the NAWInvoer_Form, another form (CaseDateTimeInfo_Form) is opened, data is entered, but when the "CaseDateTimeInfo_Form" form is closed, the data in the subform in datasheetview on the NAWInvoerForm is not yet refreshed. So I tried the following:
Private Sub Form_Close()
'------------------------------------------------------------
' RefreshNAWInvoerForm
'
'------------------------------------------------------------
On Error GoTo RefreshNAWInvoerForm_Err
DoCmd.OpenForm "KlantNAW_InvoerForm", acNormal, "", "", , acNormal
DoCmd.RunCommand acCmdRefresh
RefreshNAWInvoerForm_Exit:
Exit Sub
RefreshNAWInvoerForm_Err:
MsgBox Error$
Resume RefreshNAWInvoerForm_Exit
End Sub
Which works just fine. After the form is closed, the name, adress and cases overview form is reopened and refreshed, thus the case that has just been created is shown nicely in the subform which is based on a query.
But it is starting to become bothersome, sometimes when I close the form in which I create a new case, I don't want to have the other form (NAWInvoerForm) reopening again.
So how can i make it so that when I close the form only the data in the "NAWInvoer_Form" is refreshed, without having to reopen the form again. I mean, in the background, the form is still open anyway. It just shouldn't keep popping up everytime.
It can't be hard, but I can't see it. I'm new at this. I have found some similar topics on this forum, but none which helps me out enough.
It should be something like:
On "thisandthatevent" do a "thisandthatcommand" on "thisandthatsubform" in "thisandthatform"
If I know how the syntax of that is done, it would help me out with some other problems I see coming in the near future. I've looked at, and tried some things based on this link: http://www.mvps.org/access/forms/frm0031.htm
But without success.
Can anyone help?
View 4 Replies
View Related
Oct 21, 2006
Well, I couldn't find this using the search, so here it goes:I have a form in which I enter data to create a new client. Within that form I have a subform in datasheetview which is based on a query which holds/retrieves certain (important) fields from a table that holds case info. So in that one view the client data is displayed on the form and all cases and the most important data from those cases is displayed nicely in one screen.Now, when a client calls I navigate to that client and see all previous and all current cases that are open and/or closed for this customer. So the customer says case this and that number is the case I need to discuss with you. Now, what I would like is to be able to click or double click anywhere on the line that, for instance, says case nr 55, so that the form(s) belonging to case nr 55 pop up and all info concerning that case is displayed and can be edited as needed. My problem is: I'm still a newbie and if it was a simple thing like using the on_click event to open the form that's needed, I would not have to post this question. But that can't be done (as far as I know) since the subform is based on a query which is displayed in dataview.Am I overlooking a very simple solution to this problem or is it really going to be as difficult as I think it's going to be?For clarification of the idea I have included a screenshot of the form in question. I assume there are tons of databases out there which use such a layout or idea as this one. Please, never mind the buttons etc. It is still a work in progress. ;)
View 12 Replies
View Related
May 22, 2014
Is it possible to have a multiselect listbox on a subform with a datasheet view or do I need a combobox in this situation?
View 4 Replies
View Related
Dec 16, 2013
I'm having a problem with the syntax of a recordset of a Datasheet inside a subform which is also inside a Main Form.
Main Form - frm_1_0_LMS
Subform - frm_1_4_0_TeamApprovals
Subform(Datasheet) - frm_1_4_1_TeamApprovalsList
Here is my code:
Code:
Dim rs As DAO.Recordset
Set rs = Forms!frm_1_0_LMS.frm_1_4_0_TeamApprovals.frm_1_4_1_TeamApprovalsList.Form.Recordset
If Not (rs.EOF And rs.BOF) Then
Forms!frm_1_4_2_ApproveDeclineUserLeave.Controls("lblFiledDateLeave").Caption = rs!Leave_Date
End If
I am getting this error: Object doesn't support this property or method
View 1 Replies
View Related
Sep 27, 2012
I have a list of 22 soccer players with their weights sorted from heaviest to lightest in numerical order. I want to add further players and have the list reflect their standing each time it changes i.e. Col 1 Player ID, Col2 FirstName, Col 2 SecondName, Col 3 Mass:90 Kgs Col 4 Position In group: 1
A new player registers and is 95Kg.....he becomes #1 and the rest go down etc. Can this be done?
View 6 Replies
View Related
Mar 29, 2005
Hello, all.
I need to use a datasheet view for a subform, but I can't seem to find how to keep users from editing the column widths within the view. Help?
THANKS!
Tom
View 2 Replies
View Related
May 1, 2014
I m having a subform in datasheet view. whn i use a join query as the record source for the sub form, i am not able to add or update any record in the datasheet. Is there anyway to use a linked query as record source of the datasheet with editable property.
View 2 Replies
View Related
Oct 10, 2014
Is there anyway that we can do cascading combobox in the same datasheet view of subform? Basically I'd like to filter "Account Name" based on "Plan#" selected in the same record of subform.
View 3 Replies
View Related
Nov 22, 2014
I have a subform in which I display a table in Datasheet View. The problem is, I cannot figure out how to place the columns in the order (i.e. from left to right) I want.
For some reason, right-clicking on a column header in Form View and selecting Freeze Fields will shift that column to the left but I can find no consistent pattern to it and no other way of shifting a column. Reordering the columns in the table itself seems to have no effect on the order they appear on the subform and moving the controls around in the subform in Design View also seems to have no effect.
View 9 Replies
View Related
Jan 4, 2013
I have a subform in datasheet view and a button on the main form which is used to clear all filters in the subform.
The button's OnClick event calls a procedure on the subform. The procedure in the subform has the following code :
Code:
Me.filter = ""
Me.filterOn = false
Docmd.Save acform, subformName
Debug.Print "Filter : " & Me.filter
Me.requery
I also have debug print outs which shows the current filter on the forms OnLoad and OnClose events.
Everything works fine but somehow when I reopen the main form (with subform) the filter gets reset to the previous one.
I can change filters and that saves ok but if I clear filter it always returns to the previous ones when I reopen the form containing the subform...
For reference the filter string in subform looks like "(qrySubformQuerySource.Fieldname)="xx""
View 5 Replies
View Related
Aug 15, 2013
I have a subform whose design I am trying to change. When I make changes such as moving fields or adding fields the changes appear in form view (and layout view), but not in datasheet view. However, if I delete fields, the changes appear in both form and datasheet view.
This situation results in behavior where I can have the subform open in design view and toggle back and forth between design and datasheet view, and they are different. However, toggling between design and form view shows the changes as having taken effect.
View 7 Replies
View Related
Sep 11, 2012
I have a subform that is in Datasheet view. If I open this subform on it's own, the Date Picker works for the Date field. However, if I open the main form with the subform on it, the date picker doesn't work? Nothing happens when I select a date on the calender.
I am using MS Access 2010.
View 1 Replies
View Related
Jul 10, 2006
I have a client table with a field called location. On a reports form that I have, I want to make a combobox for all of the locations, so it could show all the clients from a particular location and also it would reduce the errors due to someone spelling a place name wrong. I could set the source to the location field in the table, but that would show them all in the order they come out and there would be duplicates.
Any help would be cool. Cheers
Bob
View 1 Replies
View Related
