Tables :: How To Reset Auto Numbering
Oct 22, 2013Is there a way to reset the auto numbering? I import new data then archive the old data. As I do this weekly my auto numbers are getting high and my users do not care for this aspect
View Replies
ADVERTISEMENT
Tables :: Categorical Auto Numbering
Jul 12, 2013I have a Chart of Numbers (range) that corresponds to a specific event
Event 1: 1000000000-1999999999
Event 2: 2000000000-2999999999
.... up to...
Event 9: 9000000000-9999999999
When they select Event 1 in the form I would like it to generate a unique Identifier within the range that Event 1's fall into. It would be an incremental increase for each Event 1 enterered. The same for the other 9 events.
The Event #'s are a quick and dirty way of knowing what type of event has taken place without reading any of the description. It is a requirement for this and I have no way around the Event #.
Tables :: Reset Auto-number Column
May 21, 2013There is a autonumber column in one table Order.Everyday I need delete records in Order and then append records into it.Doing so, autonumber keeps on increasing.Is there any way to reset Autonumber from 0 after deleting records?
View 2 Replies View RelatedTables :: Reset Auto-number Field
Apr 10, 2014I have a table which will be completely emptied and refilled. The table has a field autonumbered it is also the primary key. When the table is refilled I want this field to start from 1. How can I do that. Yes some people will say this subject has been discussed search for it. But here the issue is somewhat different we have an existing field and I do not want to compact the database each time the procedure runs.
View 1 Replies View RelatedTables :: How To Reset Auto-number Field
Dec 9, 2014how to reset autonumber field.
View 6 Replies View RelatedMerging Multiple Tables With Auto-Numbering
Aug 3, 2007I have 5 copies of a database that 5 users enter data into (including Pre, Post and Follow-Up information). These users send me their database quarterly and I am suppose to merge the data into one database from which to run reports, etc.
The problem comes in with the auto-numbering. Each "Pre" table has an ID that is auto-numbered. This auto-number is also stored when a corresponding "Post" (or follow-up form) is entered so that we can be sure the pre-, post- and follow-up are all linked to the same individual. When I merge the data, they are reassigned ID numbers in the Pre (while the Post still has the original Pre ID number) so now I've lost the link as to one individual's pre, post and follow-up form.
I realize now that the database shouldn't have been built this way, but is there any way to work around this. I've even tried exporting all of the rows for each of the 5 users into Excel and then importing them into Access in a new table (just so I could have the ease of running queries) but I seem to be getting errors doing that as well.
Any ideas?
Jen B. :)
Merging Multiple Tables With Auto-Numbering
Aug 3, 2007I have 5 copies of a database that 5 users enter data into (including Pre, Post and Follow-Up information). These users send me their database quarterly and I am suppose to merge the data into one database from which to run reports, etc.
The problem comes in with the auto-numbering. Each "Pre" table has an ID that is auto-numbered. This auto-number is also stored when a corresponding "Post" (or follow-up form) is entered so that we can be sure the pre-, post- and follow-up are all linked to the same individual. When I merge the data, they are reassigned ID numbers in the Pre (while the Post still has the original Pre ID number) so now I've lost the link as to one individual's pre, post and follow-up form.
I realize now that the database shouldn't have been built this way, but is there any way to work around this. I've even tried exporting all of the rows for each of the 5 users into Excel and then importing them into Access in a new table (just so I could have the ease of running queries) but I seem to be getting errors doing that as well.
Any ideas?
Jen B.:)
Tables :: ID Field - Restart Auto Numbering
Mar 1, 2013My ID field is an auto-assigned number. Is there any way to restart the auto-numbering at number 1?
View 14 Replies View RelatedTables :: Resetting Auto-numbering Field In A Linked Table
Sep 21, 2013I have created quite a substantial and effective database for a small gliding club with all the major data tables being linked. I need to be able to re-index tables periodically so that running totals, which are needed to calculate statement balances, works correctly - all well and good. The only problem is that the process of re-indexing requires the data in the main table to be stored temporarily and the original data deleted. When the temporary data is appended to the main table the auto-numbering just keeps clocking up.how to reset the auto-numbering in a local table.
View 3 Replies View RelatedAuto Numbering....
Aug 2, 2007We have a part numbering system that is currently like this, 11Y22 where 22 increments by one until it gets to 99 where it then goes back to 0, once it goes to 0 the letter increments to Z in this case, now once the last three characters get to Z99, then the 11 gets incremented eg, 11Z99 will become 12A00. Hope that is clear :)
My question is, can this system be implemented into the auto numbering in Access?:confused:
Thanks in advance
RD
Auto Numbering.....again
Aug 3, 2007Is it possible to start auto numbering from a number other than 0? Say 2000 for example.
Thanks in advance
RD
About Auto-Numbering
Feb 2, 2005can I make a field that can auto-number which the format that I want??
As I know that there is two format for auto-number
but I don't like them
I want to number my own format
like
XXX-YYYYMM-ZZZZ
XXX is the category number that would be selected in the form connecting to table
YYYYMM is the date year and month
ZZZZ is another auto numbering
Can I do so
Auto Numbering
Sep 28, 2004How do I get a auto Number to start a 1001?
J
Reseting The Auto Numbering
May 18, 2006If I have taken a program to creat a new program......I have cleared all the tables and what not. When I enter my first record in the auto format number starts at 963....... How do I get this starting back at zero?
thanks
Auto Numbering Problems
Oct 8, 2007Not sure as to whether or not this query shoulsd go here or else where? But here is the problem. I have been asked to repair a database that has lost the autonumbering facility. Apparently this was caused by somebody leaving the database open when the network crashed.
Each team can access the database via forms but now when the team responsible for registring new pieces of work tries to enter a new piece of work the autonumber reverts to one already within the database.
I was told that the only fix to this problem was the DMax function which I am unfortunatley not familar with. Can anyboby explain how to go abouit this and where it should be used.
Resorting Auto Numbering
Apr 8, 2008*I know that this may not be the best way of resolving the problem but this is not the actual problem but my way to simplify of explaining the "problem".
I have a Table with 3 fields.
Field 1 - Auto Number
Field 2 - First Name
Field 3 - Last Name
Initially, the Table was sorted via First Name,
but now, there is a change in requirement to sort by Last Name.
Next requirement is to number (Auto Number) according to the Last Name.
Current Sorted via First Name
Auto Number - First Name - Last Name
1 - Ben - Young
2 - Chuck - Norris
3 - Dennis - Johnson
4 - Ernest - Anderson
If sorted via Last Name
4 - Ernest - Anderson
3 - Dennis - Johnson
2 - Chuck - Norris
1 - Ben - Young
Desired result
to Sorted via Last Name & (Auto Number) via sort.
Auto Number - First Name - Last Name
1 - Ernest - Anderson
2 - Dennis - Johnson
3 - Chuck - Norris
4 - Ben - Young
Is there a way to do renumber / resort the auto number this?
*I have thousands of records....
Auto-numbering Gone Haywire!
Feb 14, 2006Although there are few records in my database, the auto-numbering started at 45. So I deleted all the records so I could start from zero but it still happens. I checked all the properties of that field both in the form and the table itself and I can't find the problem. Any ideas would be most appreciated. :confused:
View 2 Replies View RelatedAuto Numbering Gone Haywire
Mar 14, 2006I was entering records using a form and all was well until suddenly the autonumbering went from 7 to 14! I went into the table and deleted #14 and tried it again - same thing happened.
View 4 Replies View RelatedAuto Numbering A Select Query -
Sep 20, 2005Can this be done ??
I have a query on a timer that basically looks at a linked table every minute and tells me whose in the database. I want to number the rows in a column so I can reference this to a form that has 7 spaces. The number of 'users' could vary from 0 - 23, although this will soon be limited to 7 (hence the 7 spaces) to aid performance and speed. I am then going to reference the number to the unbound space on the form, iif(isnull()) 'ing the blank cells so it isnt an error.
I thought of an append query, but the sequence will always start at the next number, not from 1 each time - or as far as im aware it will - so I cant reference the cell then.
Can any one help please.
General :: Auto Generate NO And Reset It Everyday
Jan 17, 2014I Want to automatic Generate the Numbers (Me.RID) when everytime loading the form.
EXAMPLE "14011701", "14011702", "14011703", "14011704"....
140117 mean "yymmdd" and the last 2 digit mean autorun Number.
But in the next day 140118 I want the last 2 digit auto Reset and start form 01 example "14011801", "14011802", "14011803", "14011804"....
Same also for day 140119, "14011901", "14011902", "14011903", "14011804"....
Below is my incomplete VB code, i dont know how to reset the last 2 digit every day.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Private Sub Form_Load()
Dim RNos As String
RNo = DLookup("[RNos]", "Temp_Table")
Me.RID.SetFocus
Me.RID = Format(Date, "yymmdd") & Format(Val(Right$(RNo, 2) + 1), "00")
DoCmd.SetWarnings False
DoCmd.RunSQL "update Temp set Temp_Table.RNos = '" & Me.RID & "'"
End Sub
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
General :: Auto Number Reset After Import
Apr 18, 2013I have a BE database that we have been using for over a year. I imported data from an external database into this database. Now I've found that my Autonumber has reset to a very low number -- that was imported from my external database. Is there a way to change this autonumber BACK to what it was and increment up? The lowest autonumber in this database is 275944, so I don't have to worry about duplicates in the near future. I would like it reset to 457230, or at least higher than that number.
View 4 Replies View RelatedQueries :: Auto Invoice Numbering With Prefix
Jul 29, 2014How could let me get auto invoice number.... like press Button or combo box??
Here we got some related info: 10 customers, each I'd like to get invoice number with their own prefix, example ICP, CUC and etc...
Then, I would like numbering to be incremental from each customer, mean: CUC001, CUC002, then, ICP001, CUC003 and so on...
When I need to put these invoice number into Data Entry table which like below:
Load Date>>Customer>>Particular>>Quantity>>invoice No
1/Jan/2014>>ICP>>part A>>100>>ICP001
3/Jan/2014>>ICP>>part B>>200>>ICP001
5/Jan/2014>>CUC>>part C>>50>>CUC001
18/Jan/2014>>CUC>>part B>>200>>CUC001
23/Jan/2014>>ICP>>part C>>50>>ICP001
I could not use 'Auto Numbering' for each line, as I need out some lines accumulated for one invoice number 'ICP001'.
My questions:
1. What can I do to let me Automatic generate invoice number which increment from last number?
2. What can I do to let me easy to put those 'invoice number' into my Data Entry table's invoice number field? (p/s: Append Query? Update Query?)
3. What if I need sorting (example to group ONE customer and ONE Particular) for my invoicing number? What I meant is ... let say there is 30 lines customer CUC with particular Part B in a same month, and I wanna get them into same invoice number.
Modules & VBA :: Auto Serial Numbering For Each Quotation
Apr 8, 2014I am using an access program with a form with detail section. I would like to create auto sr.No when i am creating a new quotation. Using Autonumber didn't work because it start numbering from last quotation.
Snap shot is also attached.
How To Reset Count Of Auto Number Fields After Testing
Dec 12, 2012I would like to know, how do i reset the count of my auto number fields after testing? is it also possible to specify which number the auto number should start counting from?
View 3 Replies View RelatedGeneral :: Auto Numbering Records In Continuous Form
Oct 15, 2012If I want to arrange records sequentially in a report I would do the following:
From the Toolbox (Access 1 - 2003) or the Controls group of the Design ribbon (Access 2007 and later), add a text box for displaying the number.
Select the text box, and in the Properties Window, set these properties:
Control Source =1 Running Sum Over Group...
How can I sequentially arrange records on a continuous form?
Manual Auto Numbering Subject To Change In Date Field
May 18, 2006Greetings everubody,
I've a problem and hope to get answers for,
The situation is that I have a table named patient and a form named [patient1] where it holds a textboxs named "MFC_Seq_no" and another to hold [date], now, I manged to do a manual auto numbering for "MFC_Seq_no" using the following VB :
Private Sub Form_Current()
If Me.NewRecord Then
On Error Resume Next
Me!MFC_Seq_no.DefaultValue = Nz(DMax("[MFC_Seq_no]", "Patient"), 0) + 1
End If
Whenever user create new record, the system will automatically store the next number in the new record.
Now, I've be requested to code that system to start again from 1 as value for "MFC_Seq_no" whenever there are changes in date field (i.e. next day in the date field)
Is this doable and how?
Q2. how to duplicate an entire record with a subform, from another table, in it?
Thanks,