I am doing a project for school. I would like to make the default value in one field (available or rented) to be "rented" if the value in a field in another table is null. Is there an "easy" way to do this?
View RepliesCan I make the default value of a field be something in another field in another table. I tried to enter into the default value the following but, it does not find the field.
[tablename].[fieldname] I also tried it [fieldname].[tablename].
My access db is used to compile payroll time records bi weekly. The Work Hours table is used to hold two weeks of time records then they are archived to a history table. Each week has its own week ending date. I have been updating the default value of the week ending manually in the table field property in the table's design view. Is there a way to have a macro update this default value?
The current process is, open table in design view, update week ending default value, enter payroll time then change default value again for second week ending, enter payroll time. Report hours to accountant, archive table to history table.
Table1 contain Two fields (3Months) and (6Months)
Table2 contain Two fields (3Months) and (6Months)
the table 2 is the source of a form that will let the user change the numbers. table 1 should change Date1 and Date2 Fields based on the two fields (3months) and (6months) if i want to make a lookup wizard it should be changed manually and if i make a calculated field i can't find other tables in the expression builder
I have have a "master table" with Analyst ID and Analyst fields among other fields needed. Analyst ID is a number and Analyst will be the name of someone that corresponds to that number. I have a separate table that defines who is assigned to that particular ID.
1 Kim
2 Sarah
3 Beth
I have a form for this master table that shows Analyst ID and Analyst. I would like the default value of the Analyst field to be the name that corresponds to the Analyst ID number for the record. I would also like this same field to be a drop down on the form so that my users can change it as necessary. IE. If the record shows Analyst ID =1, the value for Analyst will show "Kim" unless changed to another analyst manually per the drop down.
i have a table called students with the following field:
Name
Surname
Address
Class
I want to create another field in the table called summary where i can create a default for that field to place the [Name] & [Surname] & [address] & [Class].I have now done it in expression prob being it wont let me add a number field or lookup field.
I have a simple project to work on
In a field for date/time, I want to have a default value of No Shipment Date, this text for a date/time field.
I have an existing table that has calculations. When I added a new field with an default value of zero, it did not populate the existing records. Now my tables are not calculating. How can I update the existing records with the new default of zero.
View 2 Replies View RelatedI have downloaded a contact template from the internet ready to go. There are few things I need to get rid off and make changes to.
One of the most improtant thing is making one of the field unique. For some reason, i can get to the design view. I open navigation panel and right click on the table, there is no such thing call design view on the menu.
All, using access 2010. How do I display the default value of a date/time field to just the current year instead of using =date() to get the full date.
View 5 Replies View RelatedIs there a way to make only part of the text in Default Value to be Bold or Italics? That would be cool so I dont half to make boxes throughout my paragraph for only bold text! :cool:
View 2 Replies View RelatedLinked field is shown both in Master and child tables, but not in the default subdatasheets made by when a relationship is made between a Master and Child Table.
View 5 Replies View RelatedHow do I make the windows default navigation work to the following:-Next record that navigates to next, but does not create a new record when at EOF. New record that creates a new record.
I've tried turning off 'Allow additions' for the form, but that turns off the 'New Record' button, so that's not right Perhaps it's me but the default way in which the navigation buttons work is strange. I would have thought the next button would only go next and wouldn't do new.
Is there a way to make the shutter bar be closed on database open?
I already have an autoexec macro to take people to a main menu, but would like to ensure the shutter bar is closed for aesthetics and to keep people away from clicking on something.
I'm having trouble with a Form and getting a text box entry box (Date entry) default to the date entered on the last record, which is linked to a table.
The only way I can get it to work is to type the date into the Text Box's Default property, for example, #11/13/13".
How to get the correct syntax or code into the Default property of the Text Box to make this work? I only want the entry to change versus the previous record/entry if the User changes / enters a new date.
I have what is probably a stupid question but I've been struggling with this one for a while. I have an ordering database which has an Orders table (containing Order ID, Date, Supplier etc) and an Order Line table within which I have a combo box for Product name, supplier, price, VAT rate, Line price etc. At the moment, I have the order line table as a subform within the Order form (run from the Orders table). The problem I'm having is the subtotal and total fields. At the moment these are in the Order Line table as I cannot figure out how to get these in the Orders table. In summary, can I make a calculated field in one table that calculates values from another table (linked by Order ID)?
View 3 Replies View RelatedHi everybody,
Beginner here needs help !
I'm building a make-table query for which if the result is null (no record correspond to the set of criterias), a default message like "there was no activity during the period" would appear in the table (not a message box...I need the message in the output table). The best I could think of is an IIF function but it doesn't seem to work... Is there any way to do this without using VBA?
Thanks in advance !
I'm currently working with a form, which is in datasheet view. I have many rows which are combo boxes (yes/no), and the name is rather long. So each line (each row) spreads on to 2-3 pages to the right.What I would like to do is make the namebar, on top of every column, a little bit higher, so the name would be split into two lines, or three. Allowing me to make the width allot smaller.Here is an example of my problem:http://213.213.137.96/~terminal/columns.jpgSo my question is, can I change the height of the column name? Or is there some trick I can use?regardsFrímann Kjerúlf
View 1 Replies View RelatedI am creating this temporary table on the fly I find I need a default value of zero for the field [GrpCount] . However I can't find the correct code to set this default value? I'm assuming it's an attribute
Code:
Set tbldef = DB.CreateTableDef("tblTempLkp")
With tbldef
.Fields.Append .CreateField("ID", dbLong)
[Code]....
I am using Access 2013 and in table design view. Whenever I add a new 'Number' or 'Currency' field the 'Default Value' property is (by default) always 0.This is fine except when i want to refer to a foreign key or amount which could be unknown. In either of those cases the resulting field will either be invalid (because no foreign key has ID = 0) or inaccurate (because 0 is not the same as Unknown).
I would prefer if the 'Default Value' property for new fields was always nothing, then I can add my own if and when required. I want to change the default setting on a property for new fields, not the value of the field itself.
I'm guessing this isn't actually possible, but at least this post has served to vent my frustrations! What bugs me even more is that i'm sure it wasn't like this in Access '10, is this another "upgrade".
Access 2010. I inherited a database that I need to copy and get it ready for next year's data. There are several places in the various tables where the default value on a field is 2013. I need to change to 2014. Any vba code or macro that I can do this without opening all the tables to change the values?
View 10 Replies View RelatedHello. I am looking for a way to make a field value automatically default to
the value of the immediate prior field. For example, I am in record 11, and
in Field "City" I type "New York." When I create record 12, I want
City to automatically default to "New York." Is there a way to do this?
Thanks
How I might use a value selected by a user on a database opening menu (which remains open), as a default value for records created programmatically in other tables?
I wonder if I need to write a function to repeat the value - but I cannot see how to use a form value outside of the form's own code. Some of my existing code inserts values into tables using SQL converted into VBA and I do not really want to start fiddling with that - I would rather for now use the default value of the table for the field.
My variable which will change depending upon which set of records a user is working on is a string "FullAccession".
When a user creates records in a table called tblGroups, I need the string "FullAccession" to be the default value in the tblGroups.FullAccession field. A unique integer in the tblGroups is "GroupNo". "GroupNo" and "FullAccession" are joined in a unique index for tblGroups. There is a separate PK autonumber.
Is there some way to make subdatashheets default to remove/off?
Thought options/datasheet/ might have a little button that defaults subdatasheets to off but to no avail.
Using Access 2010
I shouldn't normally record calculated figures into my table. I'm willing to buck proper procedure here for ease of use for referencing in reports; also, it's just one data point that will be calculated only once and not changed.Anyhow, I have an IIF statement that calculates a total price based on a table of costs. I set this as the default value and it calculated properly - but once I set my text box to have a control source, it no longer calculates my cost.
I was hoping to set it so it calculated the cost and then write that total cost to my table.should mention that my calculated control is in a subform.
I'm creating a database that keeps a track of questions and scores.
The questions in the database need to be dynamic and are changed frequently.
I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.
I want the question field in my scorecard table to populate with the value in my question table.
I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:
SELECT tblQ1.Q1
FROM tblQ1;
This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?