Tabs Control Help
Jan 25, 2005i have one form with 4tabs with name frmMain and one button open form frm1.
if i close frm1 i want open frmMain to 2tab
can i do this?
thanks :p :p :p :p :p
i have one form with 4tabs with name frmMain and one button open form frm1.
if i close frm1 i want open frmMain to 2tab
can i do this?
thanks :p :p :p :p :p
I have on one of my forms a tab control with 5 different tabs on it. Each of the tabs has a different set of fields but all from the same table. I was wondering if it is possible to hide a tab if none of the fields on it have any data in?
So for example tabs 2 and 3 have data on them but tabs 1, 4, and 5 dont. I would want to hide tabs 1, 4 and 5.
Hello,
I would like to hide some of the tabs of my tab control on load, and make
them visible only later via another event.
How do I hide individual tabs vs. the entire tab control?
Thank you.
I have setup a tab control with three tabs. Can I use a command button placed on tab #1 to switch the focus to tab #3? If so, how?
View 1 Replies View RelatedI have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
View 2 Replies View RelatedI'm using a navigation control with 3 tabs. I would like to open a specific tab after the user login. I tried this but it does not work:
NavigationControlName.Tabs.Item("tabNameToOpen").S etFocus
I have tried:
Me.NavigationSubForm.SourceObject = "FormName"
then the form change but the tab selection no!
I' ve created an index (catalog) for the books in the database using a tab control and the code:
Private Sub TabCtl21_Change()
If (193 + Me!TabCtl21.Value) < 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(193 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
'for english characters chr=97
If (193 + Me!TabCtl21.Value) >= 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(194 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
If Me.Recordset.EOF Then
MsgBox ("There are no books for this letter!")
End If
End Sub
It works ok but please take a look at the attached image to see what is happening after clicking two or three times the index letters.
After the tab's caption is "erased", if I pass over the mouse is being corrected.
I tried the repaint and refresh commands but neither worked.
Can anyone help?
I have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form
View 2 Replies View RelatedI'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
View 1 Replies View Relatedhi iam new to this forum this is my first post , i'am trying to design a student database and i have designed it just want to know how to add different tabs to the view and how to add button/pull down menus to that certain tab when i try to add buttons the go ontop every tab and i can't figure out how to rectefy this any help is app , if you dont know what i'am on about let me know and i will email the database to you and you can see what i mean , thanks ccbup4it
View 4 Replies View RelatedHi Gurus - is it possible to have a Tab form within aTab form, i tried it with Access 2000 cannot seem to get it right
arrh
Hi - Could anyone please help me.
I have got a form on which I am using tabs. For some reason, when that form is opened, it is not showing the full number of records from the table. It is only opening in Add mode. If I then start to enter multiple records the navigation buttons at the bottom of the screen will show me how many records I have entered and you can use the navigation buttons to switch between them, however, if I think close the form and re-open it, it goes back to showing no records.
I have tried opening it in Add mode and in Show All mode, but neither is working.
The Cycle property is showing "all records" and the data is definately being stored in teh Source table.
Any help will be gratefully received.
Hi - Could anyone please help me.
I have got a form on which I am using tabs. For some reason, when that form is opened, it is not showing the full number of records from the table. It is only opening in Add mode. If I then start to enter multiple records the navigation buttons at the bottom of the screen will show me how many records I have entered and you can use the navigation buttons to switch between them, however, if I think close the form and re-open it, it goes back to showing no records.
I have tried opening it in Add mode and in Show All mode, but neither is working.
The Cycle property is showing "all records" and the data is definately being stored in teh Source table.
Any help will be gratefully received.
Is there a way to make it so when you open a database the forms, tables, etc do not appear in the taskbar and just appear in the bottem right of access.
So basically, like already but without the taskbar tabs.
Thanks
Let me just start off by saying, I don't have any code to post as it is just an idea I have.
This is a Lease return project for work. We have an excel sheet that is broken up into tabs. Master List, Not Returned and then a tab for every month.
Here is what I would like to do.
If someone checks the box that says the leased computer was not returned, can I grab a certain batch of fields to automatically populate another Tab in this Access 2003 Form?
The second part to this would be if a person unchecks "Not Returned" in the Not Returned Tab, can I get that record automatically removed from that list view?
Similar principle for the Monthly shipping by a certain date. If the user enters in a shipped Date by say March 1, is there any way to populate a another tab into a list view?
Thanks for any advice that you gentlemen and ladies can provide.
i have a database that stores contractors/owners & the 4 types of city permits we will be issuing.
i have created a form w/the wizard which contains all the info that i need the users to enter, however all info will not always be necessary. i would like to create a main tab with general permit information for users to enter (this is always necessary), and then 4 other tabs for which specifics may be entered dependng on which permit we will be issuing (at least 1, but up to 4 of these will be necessary). I would like 5 tabs...1 for main info, and the other 4 for specifics. i tried doing this manually in design view but for some reason i am unable to enter any data. :confused: does anyone know of a quick way to separate the fields that already exist on the form created by the wizard onto separate tabs??? thanx in advance! :)
Why does my form go to the next record when I reach the end of my tab sequence. And who does one get rid of the controls in the tab list. I had controls on there at one time, but now I dont and the control names are still in the list. But my biggest problem is why its going to the next record!
View 1 Replies View Relatedhi
is there a way to display an excel looking sheet into a form which displays different tabs for each query that i want to output
or is it easier to just output the data to excel into different tabs??
thanks
Here's (http://www.lebans.com/tabcolors.htm) a dynamite site with an A97 dowload with code for "colored tabs" which I stumbled onto. I converted the A97 code to A2K and it ran.
Many of you will be able to put this to good use.:)
I would like to create a form with a double layered tab format that has the look and feel of the MS Access Options form under Tools.
What code or technique is required to make this work? For example, how do I make sure when the user selects the front row or back row of tabs that only this form is displayed.
I hope this is clear.
Dwight
Is it possible to set tabs along the right hand margin of a form going vertical instead of the default horizontal from the top of the form?
View 5 Replies View RelatedI have a tab controled form and when it opens in form view the tabs are to high to be seen on the page and you have to use the scroll bars to have access to them.
What in the world am I doing wrong. I cannot get this to open correctly and my form fits just fine on one screen in design view.
Tammy
I have a long form that has a tab control at the bottom of it. You have to scroll down to get to the tab section. After I scroll down, when I click on one of the tabs the form jumps up. It doesn't jump up to the beginning of the form but somewhere near the beginning. I've checked everything that I could think of but nothing helps this situation.
Does anyone have any ideas?
Thanks
Sue
I made a form with 2 tabs. I created controls on it and I saw that some controls belong to both of the tabs. How can I set the controls to belong only to one tab?
Thank you in advance!
I've been sent a form which retrieves company information divided into 4 tabbed sections. Really need to print all this off but can't even print the tab which is showing - it only prints the part of the firm outside the tabbed area (company name and number)
Would be really grateful for an idiot's guide on how to do this! Reluctant to provide a link as it's confidential information.