Just upgraded to Acccess 2007 and have ownership problem extracting queries from a 2002 db.
When trying to import into a new 2007 or export from the 2002, get "you have no permission" message
Have created a new user tried to change owner of the db, but no permission
File security looks correct in that I am owner of the file with full permissions, but Access doesn't recognize me as the owner
Tried logging in as admin, but it isn't the owner either
This is not critical, just very time consuming, this is a test project, but it would be nice not to have to rewrite about 30-40 queries and equivalent forms
Everytime I close, open, modify, etc, you get my drift,either a linked table or an in database table, Access validation takes minutes before I can continue.
Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).
Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.
I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.
I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?
Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?
Greeting All, I am trying the beta version of Access 2007 and realize that when converting Access 97 to Access 2007, the new db in Access 2007 has an extension of .accdb. I rename the db file name to xxxxx.mdb and the VB app fails to recognize it.
Is there any way to convert the xxxx.accdb (Access 2007 beta) to xxxx.mdb so that I can try my app against the Access 2007 db?????
I am kinda new to 2007 and have at the moment a simple database.
I want three things
A: Use the database on a server.
B: Restrict the use to users etc as i used to be a ble to do in Access 97 i think (do i have to make a MDW if so how ?) 9I tried ACCDE but does not seem to do anything)
C: When users use the datavase not see all the normal access editing stuf..
I am not sure where to post this question. I remember finding a forum just for Microsoft Access 2007 questions, but I couldn't find it again... Indifferent
Anyway, I have created a database, and have been testing it with my application. I have some data in this database. I was wondering if there was a way in Microsoft Access 2007 to create an empty copy of the database for release. In other words, I would like to create a copy of the database with all of the tables and columns, but without the data (rows) that I had entered as part of using my testing database...
Does anyone know if I can do this?
If anyone knows where this Access 2007 forum is, or resources that might answer my question, please let me know, as I would greatly appreciate that.
I'm using Access 2007 which I built a database that runs queries off of tables using ODBC. The database is all done in ms access, I've used no visual basic programing on it. I'm now trying to move a copy of the database to another computer's local drive in the office. When we try to open it on the other computer it gives me an error that says "There was a problem sending the command to the program" and Access hangs, which I then have to run task manager to end the program.
Specs Are: Windows 7 64bit (the db was created on Windows 7 32bit)
I have created a database in Access 2010 and I am not able to open the same database in Access 2007. I have read somewhere that it is possible to open. I get the message, " Unrecognized database format". In Access options, the default file format is, "Access 2007".
I am having a problem where I have a form that I enter data into. Sometimes when I enter the information it will add a record to the table and sometimes it doesn't. It doesn't put the information in the table more times than it does.
I have tried to enter the information outside the form and it still does the same thing.
Do you have any suggestions of what I can do to fix this.
I have on MS Access database.which was working fine untill now but suddenly it started this strange behaviour. When i open it it opens without any error but stays in the frozen state for like 5 mins means i cant do any thing or i cant click anywhere.
and after 5 mins it starts working fine.Does anyone have any clue abt this strange behaviour.
I'm using Access 2007, with what I think is a normal database that I've built up over the past month (maybe 15 tables, <1000 records, 20 queries, 4 or 5 reports and macros). I'm not an experienced Access programmer, so I don't think I'm doing anything fancy with security settings or any other such stuff. (If I have, it's surely by accident, not by intent.)
When I try to back up the db using the simple office button -> manage -> backup method, access generates a date-stamped backup filename and opens a file save dialog for me, but it ALWAYS fails to backup the database. I always get the same error message when I click save, whether I save on my machine, or on a network drive.
"Could not use '<path to the current database dir><backname>.accdb; file already in use."
This same error occurs when I create a new blank database with a single Table1 in it, so I don't think it's my database.
Does anyone have any idea why this might be happening? I scoured the net for help, but nothing. I checked various Access forums, but nothing. So I arrive here after I've done my homework... thanks
I want to hide the top toolbars when my users open my database in Access 2007! i have an autoexec macro to maximise the window which gets rid of the navigation bar on the side but cant work out how to hide the top bar? do i need to write code? if so what code and where would i input it.. any help would be much appreciated...
I am on a deadline today and when I went to open an Access 2007 (I abhor the fact that I am forced to use 2007) database, it will not open. It gives me the error message Unrecognized database format [file path].
I have tried creating a brand new database and importing all objects from old to new but I get the same error message.
employee personal recordemployee job statusleave recordinventory record issue to employeejob performanceinventory control of equipmentforms, queries, tables, login forms.
I work with an Access 2007 database that I split into a front end and back end. The back end holds all of the tables and the front end holds the queries, forms and reports. It is also a multi-user database, in that we have 14 people having access to the same back end. Each of the 14 people have their own front end. I have one main table in the back end listing clients and their individual ID numbers. That table has a One to Many relationship with several other tables, such as Case Notes and Authorizations, to name a couple.
Here's one of my problems: Sometimes data that is entered by a user will disappear.
Example 1: User creates a new record in the Authorizations form. Sometimes it is created by duplicating an existing record, sometimes it is completely new. User then prints a report from that new record, which looks like it has been saved. A couple minutes later, or a couple hours later, or maybe even the next day, user goes back into the database and cannot find the record that was previously created. At that time I look in the back end and cannot find the record either.
Example 2: User creates a new record in the Case Notes form on Day 1. These are always completely new records. User returns to the database on Day 2 and the new record sometimes does not show up in the form or in the back end table.
I cannot MAKE these things happen and they are sporadic, which makes it hard to diagnose, but why this was happening or if there was a way to retrieve the lost data.
"how to COMPACT the DB by introducing delay of 10 seconds and then close the DB".In the Database, I'm able to accomplish the "Compact" the database using the function below.
Function Compact() SendKeys "%(FMC)", False End Function
As my DB is quite huge, the Compact action takes around 10 seconds to complete.Now, i would like to Close the Database after Compacting the DB. I tried including "DoCmd.Quit" in the function. The commands in the function, closes the DB but the Compact function doesn't seem to have executed as it needs 10 seconds to complete.
Function Compact() SendKeys "%(FMC)", False DoCmd.Quit End Function
how to introduce this delay of 10 seconds and then close the DB.
In my database there are fields of type Date/Time, their default value is set to now(). But the problem is that those fields are automatically filled up by English system date. I want my own country's date format, without changing my system date format. So I decided, whenever database is opened it should ask for a date, so the user will give today's date and that date will be used automatically on those fields.
I have a standard shared Access DB application (i.e. central BE on the network, multiple users running their own copy of the FE on their local machine) Has been in production for a while, no major issues.
New user has been added in recent weeks. My error logger has picked up an error he hit earlier today - doesn't appear to have been fatal (he hasn't come to me with a problem, suggesting he just "OK"d the error prompt and continued on - I need to confirm this with him though...)
Error was 3343 "Unrecognized database format 'C:TempMyDBMyDB.accde'."
Can see it was tripped on a particular form which queries certain data into a subform (so he was obviously able to open the FE and connect to the BE fine; it was several steps down the road where the error has occurred).
Using Access 2007, can I return a value for CurrentProject.FileFormat WITHOUT opening the database?
I'm looking for a way to determine the file version of a given Access database without actually "opening" the database in Access (I don't want it to ever be visible at all or in any way).
So to open a database in Access 2007 "without opening it," I'm using:
Code: Dim db As DAO.Database Set db = DBEngine.Workspaces(0).OpenDatabase("C:Path-ToFile.accdb")
From here, there are at least two different "version" indicators that can be used, as in this example:
Now, if you run this code on an Access 2002/2003 .MDB file, you will get:
Code: 4.0 09.50
If you run this code on an Access 2007 .ACCDB file, you get:
Code: 12.0 09.50
Note two important factors:The db.Properties("Version") seems to be returning the JET version from what I can see in research. This is NOT what I'm after.
The db.Properties("AccessVersion") returns THE SAME VALUE for an '07 ACCDB as it does for an '02-'03 MDB, since Microsoft never updated it, apparently.
Now.... the one way that I have found that ACCURATELY describes the version of a given access database file is to use:
Code: Debug.Print CurrentProject.FileFormat
...as this will always return, for example, 2.0 for an Access 2.0 .MDB file; 10 for an Access 2002/03 .MDB file; and 12 for and Access 2007 .ACCDB file (and there are others; these are AcFileFormat bitmask constants as described in Access support).
BUT, this CurrentProject object doesn't seem to be available (so far as I can see) when using the "open without opening" method described above.
SO, is there any way to return the FileFormat value without opening the database visibly? (Merely basing it in the extension isn't right either.... that would be easy but not accurate as several formats use MDB.
Just as the title describes, I can't seem to find a solution to be able to link the front-end to the back-end tables through the common file dialog when the backend is an accdb file that is password encrypted.
See the example attached. Here it should work just fine per the Article at :
http://support.microsoft.com/kb/181076
I've found it works fine without a password encrypted back-end but not with a password encrypted back-end.
Anyone have any ideas? It would be nice to use this feature in Access as well as automating the relinking.
I have designed a database which I intend to split for multi-users to access from one front end icon on a shared folder at work. I have designed a form bound to cmr record table and on it a subform to another table where cmrs activities will be saved. The form has buttons to and blank controls.
User can create a new activity entry by typing into the blank controls and pressing the save button which saves to the activity table. the edit button extracts a selected records details (selected on the subform) from the activity table and populates the blank field for a user to edit and then hit save to save changes. The delete button deletes a selected record from the activity table. I intend to have multi-users either accessing, viewing and a possibly editing the same customer at the same time. The simultaneous viewing is essential but the simultaneous editing, though not desired is inevitably going to occur.
What I would like to know is:
1. Can you lock an individual record in a table or does the whole table have to be locked. E.g If Colleague 1 is editing Cmr A's record in Table1 can he lock it so Colleague 2 can view and edit Cmr B's record in Table1
2.Can Colleague 1 access/read Cmr A's record in Table1 to retrieve details toe the form controls if Colleague 2 is viewing or editing Cmr A's record in Table1
3. If record lock is possible, how can I initiate it in my example code below.Edit activity record Code
Code: Private Sub Edit_A_Click() 'Get Data to text box control With Me.R_P_Data_P_Subfrm.Form Me.txtrID = !rID Me.txtrID.Tag = !rID Me.txtrefNo = !refNo Me.cmbrpc = !rPC
