I am trying to get a "formatted phone" number to appear on a "make table" query. I have revised the input mask properties to format the field to parantheses around the area code and a dash after the first three digits. The query works fine as long as I run a "Select Query" but when I change the query to a "Make Table" query, the new table does not come across with the telephone number in the correct ( )xxx-xxxx format! Using the Input Mask wizard, I've tried both options of storing the data and still get the same results. I do NOT want to have to go into this new table each time and reformat the telephone number as I'm sending the table directly to a switchboard in a different database. Any ideas on how to keep the formatted phone number intact?
Here is a bit on an interesting one. I am currently designing a database and I would like to connect it to an apparantly existing bit of kit available in the uk that connects a pc serial port and the users telephone line. When someone calls, it will send the telephone number of the caller (if available) through to the pc. The database can then use this telephone number to retrieve the callers details, if they are held. Does anyone happen to know what these devices are called? I have looked on google for Caller Line Identifier Hardware etc but no joy. Thanks.
I'm a total newbie in Access....is there a way to format a field in a table for a phone number so that when you put the info in it automatically puts the dashes in between the area code and such?
the phone rings.. the phone is connected to the computer.. the incoming caller's phone number is sent to the database.. and then possibly used in some way..(eg in a query or displayed on the screen in the database)
anyone had any experience in this process or can recommend a phone/cable setup url...
I'm having an issue with the way my number fields are displayed on my form.
I want the number to be dislayed with 2 decimal places. I have formatted the numbers so that they are 'fixed' and specified 2 in the decimal places property but my numbers are rounding themselves down.
I have a problem with a table that has number formats setup as usual - #,##0.00;(#,##0.00) and formatted to 2dp. However when inputting say 1.58 into the table it will round to 2.00 and does not show any decimals except as .00. When I remove the number formatting and set the decimal place to Auto, or 1 the same occurs but no decimal places are showing.
Can anybody explain why this is happening? I have tried searching through the properties, etc. to no avail.
Is there a way to format the day of the month as an ordinal number? For example instead of formatting the day as January 1, I would like to format the day as the 1st, 2nd, 3rd etc. day of the month. I need to do this in order to match the format of a contract that we want to use as a mail merge.
Can anyone help me please. I have a telephone field that has been imported from many different databases and the format is different in some cases and i need to have all of the fields the same as in 00000000000 in other words no spaces or brackets. Some of the numbers are (00000) 000000 or (00000)000000 or 00000000000 or 00000 000000 and finally some are blank I can't seem to get the code correct to achieve what I need.
Need to confirm whether the Default formatting option in the Conditional formatting Dialog won't work in datasheet view of a form. Please note that all conditional criteria are working fine but not the Default Formatting option - only in the Datasheet view (In Single Form view the default formatting is working fine)
XXXXX-X (x are digits), for example - 4 01-1, 4 01-2...
I need find field with text beginning 4 01 and max of last symbol. Last symbol +1, then again convert to text field. For example: for example 4 01-1, 4 01-2,4 01-3 - must find 4 01-3 , then 3+1=4 and 4 01-4 format again to text.
Please, help me with formatting. Thank You in advance.
I have an Access2007/SQL Server 2012 system with 20 users for an insurance company. The company does most of its business via a network of vehicle dealers around the country. If someone comes in to buy a motorcycle, boat, or recreational vehicle at a dealership they need insurance to take it home, and our dealers send the quotes to us.
The dealers, in turn, receive payment from us each month for their efforts. Some are paid a % commission on the premium, some are paid for each quote they send regardless of whether the policy actually sells or not, and some are paid a set amount per sold policy. (Yes, that is relevant information!)
We already have reports that tally the amounts due each dealer based on their payment scheme, but last month our bookkeeper had to write about 650 checks manually because the check writing is not automated. She'd look at the report, and then enter name, address, and amount (in digits and words) into Quick Books and print the checks from there, a horribly tedious process. I've been asked to print the checks from Access. Basically one click would print all 650 checks.
I've opted to use a Make Table query to move the commissioned dealers amounts to a single location, and then to run two append queries to add the records from those paid per quote and those paid per policy. At the end of the day, one table contains all the information necessary to print the checks...except one.
The check number.
I need a way to sequentially number each record in the new table with a user generated starting point, the first check number.
By the way, the check blanks are on standard letter sized paper, three to a page, with tear-off perforations to separate them, in case that information has any relevance.
I think the best way to accomplish this is from the report itself. I've created a blank field on each record for the check number, and what seems most logical is that the sequential number is generated on print and written back to the table, rather than just generating all the numbers at once. That way, should print ever be interrupted, it will be easy to take up where we left off.
Date of Birth (DOB) field etc. in one program are text - how do I make another file with the same data into number fields for Date of Birth field etc? When I copy data to file that has number fields the 09252004 is changed to 9252004. Can I get reports with the correct Date of Birth in them by moving data from text file to number file?
There is data entered monthly in file and formula has been set up for January, February etc as ---quarter: Int(([month]-1)/3)+1. I would like formula for the fiscal year for April to be counted as month 1, May - month 2, June as month 3, July as month 4, August as month 5, Sept as month 6, October as month 7, Nov as month 8, Dec as month 9, Jan as month 10, Feb as month 11 and March as month 12.
I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate() Dim medlemskod medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod") Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000") End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
I have a access table with 32 columns and 42,000 rows of numbers. I need to find the MIN number in the row and if the MIN number has duplicates then I need them all placed into another column by column name. Example: Starting file DEST,ORIGIN1,ORIGIN2,ORIGIN3,ORIGIN4, ETC 05512,3,2,4,2
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate() If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1) DoCmd.RunCommand acCmdSaveRecord End If End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?