Hi,
I have a text box which contains a formula. When the text box is divided by zero, it appears #ERROR in the text box. I would like it to be invisible when it divided by zero and to be visible when it has a number.
Any ideas?
Thanks,
Le
Just wondering, if this is possible and if so how?
I got query results and would like to divide a figure from the number of results shown..
so if 4 results are shown from the query then i would like to divide 100 by 4, and if 5 results showed then divide it by 5?
How can I avoid a divide by zero error in an MS Access Query?
View 2 Replies View RelatedHi hope someone can help,
What I’m trying to do is work out price per quantity, at the mo I have a database that has products and price so lets take paint for an example.
If I have a 5 litre pot of paint and I’m selling it for £10 I would like a field that tells me the price per litre, so what I’m think I need to do is have a field called ”price” and divide it by a second field called “quantity” and output the sum to a third field called “price per litre” which populates the database.
Sadly I haven’t got a clue how to do this with access and if anyone can help it would be much appreciated.
Thanks
HiIn Excel, I believe you can format a number and automatically divide it by 1,000 without messing up rounding.For example, 10,000.06 after you apply the formatting becomes 10 as in 10k (for some reason accounting people find this easier to look at/work with). However, if you try to sum the value Excel will actually use the decimal figure rather than the number 10.Is there a similar way in Access?
View 2 Replies View RelatedHi all.
I have three subforms on my main form. They all display salary details from different sources, and each subform has 2 calculated fields in the form footer to show the average salary and the number of records on which the average has been calculated.
I then have a field on the main form to calculate the average of the averages which works OK unless one of the subforms has null or zero in it, in which case it returns no information.
Can anyone suggest a way of bypassing this divide by zero error? The code I'm using to calculate the average of averages is as follows:
Me!Text44 = ((Me![Frm1 subform].Form!text4 * Me![Frm1subform].Form!Text6) + (Me![Frm2 subform].Form!text4 * Me![Frm2 subform].Form!Text6) + (Me![Frm3 subform].Form!Text6 * Me![Frm3 subform].Form!Text8)) / (Me![Frm1 subform].Form!Text6 + Me![Frm2 subform].Form!Text6 + Me![Frm3 subform].Form!Text8)
Thanks for any help you can provide...
I am trying to divide each unique value in a column by the total column; so sales by total sales.
View 4 Replies View RelatedI have an alias named [Net Income]
[URL]...
I want to divide it's value by the sum of its values through another alias [%]. How to do it?
%:=[Net Income]/Sum([Net Income]) Not working
getting an error saying:
"You tried to execute a query that does not include the specified expression 'SR_NO' as part of an aggregate function."
I have a database which contains a table called "orders" that has a field called "quantity" in it. I also have a query called "defective parts supplied" which has a field called "defective parts".How would I use a new query called "% failure/defect rate per supplier" to calculate the following:100 * [defective parts]/[quantity].
View 14 Replies View RelatedI have an order table
order nr quantity.
100 110
and a pack table
pack quantity
1 1
1 2
...
1 25
2 1...
I want to make a query that returns this :
order nr pack quantity
100 1 25
100 2 25
100 3 25
100 4 25
100 5 10
I have a list that shows how many books we have for each PO No. (Sorted by PO No.) Like below:
LIST 1:
Code:
PO NoTOTAL BOOKS
PO-0001 12
PO-0002 15
PO-0003 26
Now I would like to distribute/divide these different books to boxes and each box gets maximum 10 books. Like below list:
LIST 2:
Code:
BOX NOBOOKSPO NO
0001 BOOK 1~10 PO-0001
0002 BOOK 11~12 PO-0001
0002 BOOK 1~8 PO-0002
0003 BOOK 9~15 PO-0002
0003 BOOK 1~3 PO-0003
0004 BOOK 4~13 PO-0003
0005 BOOK 14~23 PO-0003
Format is not important in the list2, for example in Box 0002 we have book 11~12 means (book 11 of 12 +book 12 of 12) in po-0001
+ book 1 of 15 until book 8 of 15) in po-0002
books have bookno, for example for po-0001 we have 12 different books it means we have bookno (1 of 12) until (12 of 12) for this po no.
How I can produce automatically list 2 from list 1 by query or coding.
Simple division, I thought! I'm dividing a Sum of hours by Pay Periods to determine the average of missing hours for year-to-date. Most of the division works perfectly, and some doesn't and appears to be related to values of 1 or less than one.The formula: [Sum]/[Pay Periods].Sum relates to total missing hours and pay periods are total pay periods for the year so far.What comes out wrong:
1 (hr) / 12 (pay periods) = 8.33, when it should be .0833
0.5 / 12 = 4.166 when it should be .0416
What is right is everything else, starting with 1.5 hrs
1.5 / 12 = 0.125
What do I need to do to make all of the values divide correctly?
I'm struggling with the correct syntax for this, but ideally what I want to achieve is:
SELECT (SELECT Count(Status) FROM P_T WHERE 'criteria are met') / (SELECT Count(Status) FROM P_T WHERE 'different criteria are met')
They are both fairly simplistic select statements, so I imagine this is not that difficult to achieve, but I'm not sure how to structure the query.
I want to take the sum of all records 'cost' i.e.
record 1 - 2
record 2 - 4
record 3 - 3
I want to take the sum and put it in a calculated field and use it to divide it by a predefined value 'no of responses.'
So I make the field in the query -> Calcfield: (Sum([cost])/[responses])
I am pretty new to this and i don't understand why this won't work? Is it something to do with the row Group by (total.)
I am with an educational organisation. Now we need to allocate various fields to students depending upon their merit, where the difference between the average percentages between any two groups cannot be more than 2% and that also implies equal distribution of talent. However, First few have to be given choice of field and also students recommended have to be given choice. The number of fields varies from 2 to 8. . Further the vacancies are also not equal in all fields. E.g. for 100 students to be divided in four fields the vacancies can be 35 for ZZSS, 24 for UYTE, 29 for OIUI and 12 for HGFT.
I need a solution preferably in MS Excel or MS access for the same with nil/ least usage of VBA.
Table examples
Name REg. No. Percentage
Aaa 986544a 89.3%
Bbb 547521j 87.2%
Ddae v44887y 95%
I am running a very simple query that divides profit over turnover to show the margin. I have many queries throughout my database that do this, here is my little formula;
Margin: Round(([profit]/[Turnover])*100,2)
Now, this runs just fine but if I put in a criteria of <10 I get the division by zero error. The reason I am confused is that there are no zeros or error values or even negative values in either of the profit or turnover columns?
Also I have an almost identical query in another database that has a <5 criteria in it and it works a peach.
I have searched but all I am getting is the usual definition of the division by zero error.
I'm fairly new to setting up Access databases. Been learning a lot. Ran into a snag that I'm hoping you can help me with.
I am using a form to display text labels and running statistics for our jail.
The form, "Complete_Worksheet" gets its data from a query, "qryComplete_Worksheet". Fields that make these up are:
ID (key)
Standard (text)
Outcome Measure (text)
Numerator/Denominator (text)
CalcValue (number)
ID, Standard, Outcome Measure, and Numerator/Denominator are queried from a table, "tblComplete_Worksheet". CalcValue comes from another query, "qryDataSelect". My problem is this:
In the final calculated statistic, some records are numerators and some are denominators. I need one more field, which I have been trying to create as a calculated control on my form which will divide each numerator CalcValue value by the denominator CalcValue value following it. Since these values change constantly as new data is entered into another data table, the calculated control needs to also change with them. I have been attempting to do this using the following expression:
=DLookUp("[CalcValue]","Complete_Worksheet", "[ID]="&"[ID]-1"/[ID]=")
I keep getting a #Error message in the control in form view. When I run the expression in the Immediate window, I get a Compile Error:
Expected: line number or label or statement or end of statement
Any suggestions on how to make this work?
I have 4 fields that are unbound on a form. img1 img2 img3 img4..When these are entered they are all combined and autofill another unbound textbox = imagename.. what i would like to do is from this unbound textbox 'imagename' ..i would like to populate a textbox that IS bound called FileName
[Event Procedure]
Private Sub imagename_Click()
Me.imagename = Me.FileName
End Sub
In my form's text box I have noticed that I can;t write paragraphs ie use the TAB key to start a new line. If I use rich text I assume this will be possible. But are there any disadvantages to using rich text?
View 1 Replies View RelatedWe need to move rich text from an Access memo field to a Word text box. So far the best Ive been able to come up with is in the code below. In this code pprs!What is a record set field of a table memo field that is bound to a text box enabled for rich text. The rich text seems to be stored as html as so I can get word to convert it by enclosing it in html tags.
Dim What As Word.Shape
Set What = doc.Shapes.AddTextbox(msoTextOrientationHorizontal , doc.PageSetup.LeftMargin, 225, 534, 0)
Dim sPath As String
sPath = "G:Temp.html"
Open sPath For Output As 1
Print #1, "<HTML>" & pprs!What & " </HTML>"
Close #1
What.TextFrame.TextRange.InsertFile (sPath)
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies View RelatedMy database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
View 5 Replies View RelatedI have a column which contains "text digit text" as "AAA 222 BBB". The numbers of letters or digits can vary.
I need to SELECT the column which contains digits in a specific interval. For Example I have
"DFS 673 JKK"
"A 3454 LJLJ"
"SD 854 JKLJD"
I need to SELECT the column which contains 600 < Digit < 700 the result of the query in this case would be "DFS 673 JKK" because 673 is between 600 and 700.
Thanx for any clue or suggestion...
I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
I am using Access 2007 and 2010. I would like a text box (or label) on a report to autofil using fixed text from a label on a different (closed) form.
View 8 Replies View RelatedI have some vba where I'm importing a text file and splitting it out into a table. For the most part its working just fine.
But I have a line of data that I need to pull out the string right after "Old" - Murphy and right after "New" ZMurphy
Acc# : 111111 This is test data, Person : 22222 Old Murphy New ZMurphy
I'm thinking Instr() could do this but I'm unable to get it to work.
I am using Access 2010...