The Expression On Click / On Load - Errors

Jun 26, 2006

Hi All,
I have a access code that is working fine on 5 machines. But when i try to run it on my 6th machine, I get all kinds of errors, such as :
"The expression On Click you entered as the event property setting produced the following error: Sub or Function not defined"

Similarly I am getting errors for "On Load" & all other events.

I even checked for the refernces. They are all same on all systems.

Is there some file missing on the 6th PC or ????

Thanks in advance for all your help

Regards,

Jatz

View Replies

The Expression On Click / On Load - Errors

Jun 26, 2006

View 1 Replies View Related

Modules & VBA :: Can Only Click Button Once Per Form Load

Feb 3, 2014

I have created a button that works fine however it will only work one click per form load and i cant seem to figure out why.

Code:
Private Sub BntExpired_Click()
Dim QryAllCourses As recordset
Do Until ExpiryDate > Date Or ExpiryDate = ""
MsgBox ([FirstName].Value + " " + [SecondName].Value + "'s course in " + [CourseName].Value + " has expired")
recordset.MoveNext
Loop
Exit_BntExpired_Click:
Exit Sub
Err_BntExpired_Click:
MsgBox Err.Description
Resume Exit_BntExpired_Click
End Sub

View 8 Replies View Related

General :: How To Load Data From Listbox Double Click Event

Aug 22, 2014

Is it possible to load the data in input from by double clicking on data from list box ?

I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.

User enters the data from input form. (It has been done)

User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)

Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?

View 9 Replies View Related

Modules & VBA :: Word Document Load When User Click Button And Perform Email Merge

Oct 7, 2013

I have a Word 2010 document linked to an Access 2010 data source. When a user clicks a button in Access, the Word document loads and performs a email merge using the below VBA code:

Private Sub Document_Open()
With ActiveDocument.MailMerge
.Destination = wdSendToEmail
.SuppressBlankLines = True

[Code] ....

However, as the .mailsubject part is not in the loop it is only retrieving the first Return Code. I have tried to integrate in the loop to no avail. Also, how do I add static text to the Subject, I need something like "Your Return Code" + "Return Code"..

View 6 Replies View Related

Double Click Expression Error?

Jun 26, 2006

Hello,

I currently have a combo list on a purchase order form that has the following event procedure(s) in it so as to open the inventory window as needed to add/edit inventory.

Not in List:
Private Sub Combo55_NotInList(NewData As String, Response As Integer)
MsgBox "ERROR: ITEM not in list. Double-click this field to add an entry to the list."
Response = acDataErrContinue
End Sub

On Double-Click:
Private Sub Combo55_DblClick(Cancel As Integer)
On Error GoTo Err_Combo55_DblClick
Dim lngCombo55 As Long

If IsNull(Me![Combo55]) Then
Me![Combo55].Text = ""
Else
lngCombo55 = Me![Combo55]
Me![Combo55] = Null
End If
DoCmd.OpenForm "INVENTORYITEMSform", , , , , acDialog, "GotoNew"
Me![Combo55].Requery
If lngCombo55 <> 0 Then Me![Combo55] = lngCombo55

Exit_Combo55_DblClick:
Exit Sub

Err_Combo55_DblClick:
MsgBox Err.Description
Resume Exit_Combo55_DblClick

This works GREAT on other forms I have however, on this particular form it gives me the following error:

ERROR:
You have tried to assign the null value to a variable that is not a variable data type.

I have started from scratch several times....can anyone help? Is there anyway to add a button to the form to open the inventory form and then requery the combo box when closing the inventory form?

Thanks,
Dianne

View 5 Replies View Related

Expression On Click Error Within A Form

Feb 9, 2015

Created a form that requires daily work flow info to be entered. Tested the form accepting random typos like "%, # ! etc... Worked just fine. In production received the following long error:"The expression On Click you entered as the event property setting produced the following error: Expression may not result in the name of macro, user defined function or event procedure".

View 1 Replies View Related

Forms :: Expression On Click - Event Property Setting Produces Error

Nov 24, 2014

Code:

The expression On Click you entered as the event property setting produced the following error: Procedure declaration does not match description of event or procedure having the same name

Now this is the error message that I am constantly getting from any command button I hit on a certain form. Here is the code of the form.

Option Compare Database
Option Explicit
Public inputCSV As String, ORG As String

Private Sub CopyToTableBt_Click()
Debug.Print "Sub Execute calling ImportCSVForConfederation inputCSV="; inputCSV; " ORG="; ORG
ImportCSVForConfederation Me.CSVs, ORG

[Code] ....

I changed the names of the buttons, reconstructed the code under those names, went to the modules and changed names, made sure that a sub o function name is not duplicated in the project... But helas the error is still there. It used to work and suddenly does not work.

View 2 Replies View Related

Click Image Hyperlink In Form To Load Image To Form

Jun 16, 2006

Hi guys,

I'm in desperate need of help and want to know if it is possible to load an image on a form once a hyper link is created.

For example, I have a form with a hyper link to an image created, currently, when you click on the hyperlink, it opens the picture in the browser, can you change it so that it loads teh image embedded into the form instead of loading it into a browser?

If so, how?

Thanks

View 1 Replies View Related

Code Triggered From Label On Click Behaves Differently From Command Button On Click

Nov 7, 2006

Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.

DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop

When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.

Can anyone enlighten me as to why this behaviour occurs.

Thanks

Richard

View 4 Replies View Related

Writing An Expression In The Expression Builder

Jun 8, 2005

Good day all

Heres what im trying to do:

in one textfield i have =Count(*)

this returns all the records in my db.

now i want to split it up. i want to count all the records for each month.
my field name is datein_now but its just a normal textfield and not a date field.
example in field: 05/02/02 10:24:31 AM.
also got a datein textfield:05/02/02
i had
Count(*) where datein_now between 05/05/01 and 05/05/31

please help

lee

View 1 Replies View Related

Help With Errors

Jun 9, 2005

When I click a tab (table,queries,reports or module) I receive an error that says (" isn't an index in this table. Look in the indexes collection of the TableDef object to determine the valid index names). Please help.

Thanks,
Kacy

View 3 Replies View Related

Car Event | Few Errors

Jun 1, 2006

Hi all,

i have been sick for quite a while,But back on track now.In the past i was building a car event db and would like to finish it.I have checked it out and there seems to be a few errors that i can't remember anything about.

you must have outlook installed otherwise some missing references come up.also there seems to be a problem with the date on the invoice form,the backup section in utilites.

If someone could have a look and point me in the right direction it would be greatly appreciated.

The file is access 2003 format

View 1 Replies View Related

Database Errors

Jun 20, 2007

I have database which has worked normally, and just made a couple of amendments

I then go to edit a form (which I had not amended) and get an Access has an fatal error etc.

I reopened it. and repaired compiled etc, but absolutely impossible to get into this form. Access crashes every time I try to do something with it. I can't even delete the form.

(This was A97)

There's no problem, I just got my last back up, and imported the changes I had made from the faulty dbs -

I just wondered if anyone else ever got these issues, and what they did about them.

View 2 Replies View Related

Paste Errors

Jan 8, 2008

Hi All,

I've created an Access Database off of an old Fox Pro System. What I need to do is take the data from the tables in the old system and convert them in Access '03. I have roughly 4600 records to transfer.

When I copy the data from the old system and paste it in an Access table, only 300 or so records are pasted. Also, when I check the paste errors, there are less than 100 in there. Where are they going?

Some of the files aren't pasting because there were input errors on some. Others are linked with a department and Acct number and some of those are no longer current, so another reason why some of these records aren't pasting. This is a problem, but should only be around 500-1000 records tops.

I have noticed if I paste less at a time, I get less errors and more are actually copied through, but I don't know exactly how many I should do at a time?

Some questions I have are:

1. How many should I paste at a time?

2. Am I missing something with the paste errors, is there like a setting I can adjust?

3. Is there a better way to convert this old table into a new table?

Any suggestions or comments would be great because I have been stuck on this for a while and I DO NOT want to input these records one by one.

Thank you in advance,

Josh

Here's an email I sent to one of my friends seeing if he had any insight. I might explain my problem a little better here:

Purchasing Department has an old Fox Pro Contract System. I made this same system into Access and it works great. My problem is now converting the tables from the old system into the new system. There are approx. 4200 records. I have tried pasting them all in together and also sections at a time, but everything I do so, I get more or less copied through, and more or less paste errors displaying the ones that hadn’t copied over.

The reason some are not pasting in is because of old user input errors. Another reason is department and account numbers have changed therefore when the copy takes place, if Access doesn’t recognize an Acct number, then it cannot relate it to a department and will not paste in. I’m fine with that though. The problem I’m having is I’m always getting different amounts of errors each time I do this. For example, I did the first 500 records. Had 21 paste errors, all the others pasted fine. I then tried to do less so I copied the first 400 and only received 3 errors, but then I did the next 400 after that and only 200 pasted through and it only displayed 20 or so paste errors. I think there are roughly 400-500 bad records so I’m not understanding why all but those 400-500 paste.

View 3 Replies View Related

Suddenly Getting Errors

Jan 15, 2008

We have an access db that has been working fine for ages and now when we click on a New Record button we are getting the following error:-

Run time error 2105 - you can't go to the specified record. erroring out on the line DoCmd.GoToRecord , , acNewRec. We are not aware of anything changing on the PC that the db is sitting on. I have spent the whole day searching the web but have found nothing helpful.

I have compacted and repaired the db, even went to the form/table security to see if all users can edd/add.

Any help greatfully received

View 2 Replies View Related

Help With Paste Errors

Jan 8, 2008

I've created an Access Database off of an old Fox Pro System. What I need to do is take the data from the tables in the old system and convert them in Access '03. I have roughly 4600 records to transfer.

When I copy the data from the old system and paste it in an Access table, only 300 or so records are pasted. Also, when I check the paste errors, there are less than 100 in there. Where are they going?

Some of the files aren't pasting because there were input errors on some. Others are linked with a department and Acct number and some of those are no longer current, so another reason why some of these records aren't pasting. This is a problem, but should only be around 500-1000 records tops.

I have noticed if I paste less at a time, I get less errors and more are actually copied through, but I don't know exactly how many I should do at a time?

Some questions I have are:

1. How many should I paste at a time?

2. Am I missing something with the paste errors, is there like a setting I can adjust?

3. Is there a better way to convert this old table into a new table?

Any suggestions or comments would be great because I have been stuck on this for a while and I DO NOT want to input these records one by one.....

View 1 Replies View Related

Leaving Out Errors

Nov 29, 2005

I do a query to remove "." from a list of my servers. This works great, but for every name on the list without a "." I get an error in the output. Is there any way to remove these errors from the output, so I only see the data that has been properly pruned down?

here is the query i'm running

sort: Left([AgentName],InStr([AgentName],".")-1)

View 2 Replies View Related

Combo Box Errors

Dec 7, 2005

I have an unbound combo box that is sporadically failing with an error message when an entry in its pulldown list is selected. The error message is to the effect: 'The value you entered isn't valid for this field' .

The record source for the combo box is a table/query which is updated by an event triggered by another control on the form. That code also sets the Format property of the combo box to match the native Format of the field from which the combo box is retrieving the data. So data from Yes/No field, a date field, or a currency field, for example, display properly in the revised combo box. When the combo box is populated from a source field that has no special format (the usual case, as with text fields), the code resets the combo box's Format to "".

Again, the combo box has no control source (it is unbound). So, the only culprit for an error message like this that I can think of is this Format property. Yet, when the error occurs, the combo box's Format is properly set to "", which should permit any kind of data, and I try entering any kind of data at all -- all data is rejected with this error message.

Is there any thing else I should look at?

View 3 Replies View Related

GEt Errors When Form Has ' In It...

Feb 15, 2005

Hi,

this is probably an old one but its catching me out. I'm writing a sports club database in ASP.
When users submit their club details in the form to Access, I get errors if it has the characters ' in any of the fields.
I've managed to get around " by replacing it with "". However, this doesn't seem to work with '

I'm new to ASP... anyhow the part of my form which deals with this is:

Form_style = Trim(Replace(Request.Form("style"),"""",""""""))
Form_club_name = Trim(Replace(Request.Form("club_name"),"""",""""""))
Form_name = Trim(Replace(Request.Form("name"),"""",""""""))
Form_website = Trim(Replace(Request.Form("website"),"""",""""""))

I also do a bit more error checking on the email address, for length, @ etc. This bit seems to work ok. However,
Any tips on how to improve the error handling for ' or " before its submitted to access is appreciated.

Thanks

View 2 Replies View Related

Compile Errors

Jul 2, 2006

My Access 2000, created the dummy's way, has been perfectly happy with its query expressions. But when I create a module calling up these queries, I get Compile Error on many perfectly legal expressions such as Left([pfn],1).
I've tried repairng the database but to no avail.
What is going on, please?

Btw, DBicken, it's when I include your text concantenation code (Posting 6/21/06: "A whole lotta text/stitching") but I don't think it's your fault: it's just exposing it. I can't try your suggestion until I solve this problem.

View 3 Replies View Related

2 '80004005' Errors

Nov 14, 2006

The problem is that when an admin update the database from a web application that I created in .asp, it gave an error message.
The only way to fix this is to restart the IIS services and others that depend on IIS. But this is not practical.
Code:Microsoft OLE DB Provider for ODBC Drivers error '80004005'[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query./FoodMenu/CalendarPopUp.asp, line 62
Here is the code for 'CalendarPopUp.asp'. Its quite long.
Code:<%@ Language = "VBScript"%><%Option Explicitdim NewEvent 'As Booleandim EventDate 'As Datedim EventStartTime 'As Datedim EventEndTime 'As Datedim EventBLD 'As Stringdim EventDescription 'As Stringdim EventDateString 'As String dim EventID 'As Stringdim Conn 'As ADODB.Connectiondim rstPopUp 'As ADODB.Recordsetdim SQL 'As Stringdim BLD 'As Stringfunction SafeQuote(InString)safequote = replace(InString,"'","`")safequote = replace(InString, vbCrLf, "<br>")safequote = replace(InString, " ", " ")end functionfunction SafeDate(DateValue)if isdate(DateValue) thenSafeDate = "#" & DateValue & "#"elseSafeDate = "NULL"end if end function%><%'***** Save Form Data *****if Request.Form("cmdSaveRec") = "Save Event" thenif len(Request.Form("txtDetails")) > 0 thenif Request.Form("NewEvent") = "True" thenSQL = "INSERT INTO tblCalendar ( [Date]"SQL = SQL & ", StartTime"SQL = SQL &", EndTime" SQL = SQL &", BLD"SQL = SQL &", Description ) "SQL = SQL & "VALUES ( "SQL = SQL & SafeDate(Request.Form("txtEventDate")) & ", " SQL = SQL & SafeDate(Request.Form("txtStartTime")) & ", " SQL = SQL & SafeDate(Request.Form("txtEndTime")) & ", " SQL = SQL & "'" & SafeQuote(Request.Form("BLD")) & "', "SQL = SQL & "'" & SafeQuote(Request.Form("txtDetails")) & "' );"'Response.Write sqlConn.Execute SQLelseSQL = "UPDATE tblCalendar SET "SQL = SQL & "[Date] = " & SafeDate(Request.Form("txtEventDate")) & ", "SQL = SQL & "StartTime = " & SafeDate(Request.Form("txtStartTime")) & ", " SQL = SQL & "EndTime = " & SafeDate(Request.Form("txtEndTime")) & ", "SQL = SQL & "BLD = '" & SafeQuote(Request.Form("BLD")) & "', "SQL = SQL & "Description = '" & SafeQuote(Request.Form("txtDetails")) & "' "SQL = SQL & "WHERE ID = " & Request.Form("ID") & ";"'Response.Write sqlConn.Execute SQLend ifelseend ifSet rstPopUp = NothingConn.CloseSet Conn = Nothingend if'***** Process QueryString *****if Request.QueryString("NewEvent") = "True" thenNewEvent = TrueelseNewEvent = Falseend ifEventDate = Cdate(Request.QueryString("Date"))EventDateString = Request.QueryString("Date")if len(Request.QueryString("EventID")) > 0 thenEventID = Request.QueryString("EventID")SQL = "SELECT * FROM tblCalendar WHERE ID = " & EventID & ";"set rstPopUp = Conn.Execute(SQL) if not (rstPopUp.EOF and rstPopUP.BOF) thenrstPopUp.MoveFirstEventDate = rstPopUp("Date")EventDateString = cstr(Month(EventDate)) & "-" & _cstr(Day(EventDate)) & "-" & cstr(Year(EventDate)) EventStartTime = rstPopUp("StartTime")EventEndTime = rstPopUp("EndTime")BLD = rstPopUp("BLD")EventDescription = rstPopUp("Description")elserstPopUp.Close Set rstPopUp = NothingConn.CloseSet Conn = Nothingend ifend if%><html><head><%if NewEvent then%><title>Add New Event</title><%else%><title>Edit Event</title><%end if%></head><body bgcolor=#0066a9 text=black><table border="1" width="481" id="table1"><tr align=center><td align=center width="480"><font color=white>Breakfast 8am-10am    Lunch 11am-2pm    Dinner 6pm-10pm</font></td></tr></table><%if Request.Form("cmdSaveRec") = "Save Event" then%><script for=window event=onload LANGUAGE="VBScript">close()</script><%End If%><table width=480 height=380 border=0><form action=CalendarPopUp.asp name=frmEvent method=post><input type="hidden" name="ID" value="<%=Request.QueryString("EventID")%>"> <tr> <td align=left bgcolor=#0066a9>  </td> <td width=55% bgcolor=silver> <table width=100% height=100% border=1 bordercolordark=Gray bordercolorlight=White> <tr bgcolor=silver bordercolor=Silver> <td align=center valign=middle><input type=hidden name=NewEvent value=<%=NewEvent%>> <table height=100% border=0 cellpadding=1 cellspacing=1> <tr> <td align=center><b>Select a Date:</b><br><input type="text" name=txtEventDate Value="<%=EventDateString%>" size=10> </td></tr><tr></tr><tr> <td align=center><input type="submit" name=cmdSaveRec value="Save Event" size=25> </td></tr> </table> </td> </tr> </table></td><td align=right>  </td> </tr> <tr> <td align=center bgcolor=#0066a9 colspan=3><select size="1" name="BLD"><option selected>choose meal type</option><option>Breakfast</option><option>Lunch</option><option>Dinner</option><%=EventBLD%></select></td> </tr> <tr> <td align=center bgcolor=Silver colspan=3> <table width=100% height=100% border=1 bordercolordark=Gray bordercolorlight=White> <tr bgcolor=silver bordercolor=Silver> <td align=left>   Please Enter a Brief Description of the Event:<center><textarea rows=9 cols=53 name=txtDetails><%=Replace(EventDescription,"<br>", vbCrLf)%></textarea></center> </td> </tr> </table></td> </tr></table></form></center></body></html><%set rstPopUp = Nothingset Conn = Nothing%>

So, I look up in this site and follow it. No luck. I even follow theis link
Code:http://www.webwizguide.info/asp/faq/server_permissions.asp
But it was already configured that way.

Even when I try to add, it gave me a similar error message.
Code:Microsoft OLE DB Provider for ODBC Drivers error '80004005'[Microsoft][ODBC Microsoft Access Driver] Could not delete from specified tables./FoodMenu/include/incAdminDel.asp, line 21
Here is the code for 'incAdminDel.asp' file
Code:dim TmpString 'As Stringdim Item 'As Stringselect case Request.Form("cmdTopic")'***** Community Calendar *****case "Edit Community Calendar"for each Item in Request.Formif left(Request.Form(Item),6) = "Delete" thenSQL = "DELETE * FROM tblCalendar WHERE ID =" & _mid(Request.Form(Item),7) & ";"Conn.Execute SQLend if

Can anyone tell me what I need to look for?

P.S. This is an Online Food Menu which is inside an 'Employee Directory' that is a web application. When a user open up the 'Employee Directory', it load up the page along with an icon to view 'Online Food Menu'. Kind of like having a web application within a web application. Updating the Employee Directory is not a problem. The issue lies on the admin side where s/he try to update the menu, it give 2 of the above errors that I mention.

It is on a Windows 2003 standard edition machine.

View 2 Replies View Related

Parameter Errors

Feb 22, 2007

Hi all

Background
I'm appending data using an append query. I have a known error that I'm trying to work around. sometimes when trying to append, the field names are slightly different and I get a prompt for a parameter value. ideally i'd like all the field names to match up...

So.... I'm trying to error trap this.
what I need is some code that will...

if prompted for a parameter, cancel the parameter and goto query 2 (or error1).

I can't seem to use on error because access isn't treating it as an error...

Any ideas are much appreciated.

Damon

View 7 Replies View Related

Access--Compacting Errors

Aug 11, 2005

Since we have installed the latest Windows critical security updates, upon closing an Access database, the database gets corrupted. Error code is c000020c.

View 4 Replies View Related

Check For Errors In A Macro?

Aug 18, 2005

How can I prevent all remaining Macro actions from executing after getting an error in a vba module (such as an ODBC timeout) in a previous macro step?

I know I can add conditions to each macro step, but don't know how to look for "any error".

Any help is appreciated!! Thanks

View 1 Replies View Related

Conflict Errors When Synchronizing

Feb 14, 2006

We have multiple users using the same database as local copies on each of their PC's. they are entering information in specifically assigned areas and no one is overlapping in their work areas. The users then synchronize to a master database that is on the network to transfer their info.

When synchronizing we are beginning to conflict errors, and the message is hard to decipher. Below is an example:

"Update/Delete conflict: Another replica also updated this record. This record lost the conflict. Either resubmit your update or delete the conflict record."

It then shows two columns. Column 1 has the option to "Keep exisiting data" an dcolumn two has the option to "Override with conflicting data".

Technically, when synchronization happens, data of the user who is synchronizing overrides existing data in the master database in the same record(s). In that spirit, what is the 'existing' and 'conflicting' data referred to in the message?

View 1 Replies View Related