I have three different databases, engineering, properties, and my contacts.
I would like to have one switchboard that I can put on my desktop to access all three databases. Is this possible?
Any help would be greatly appreciated! :)
I am working on a database that will be an addition to an existing one on the company server. However, to make the overall layout not so complex and allow room for other additions in the future, I'd like to keep the databases separate. This will also ensure more efficiency, integrity and troubleshooting overall.
I have the original database with the name of "Cell MFG Screen" that contains a switchboard. I am now creating a db to keep track of manufacturing waste (which will also be on the same server when completed). That switchboard is called "Cell Waste Weight". Again, I want to keep these db's separated from one another as well being able to add future dbs. Now, what my plan is to make up a one db that consists of only a switchboard that will be used as the main switchboard to be able to navigate to other dbs that are located on the server.
Does anyone know how this is done?
Thank you in advance for your help,
~Kilch
I'm creating a database that keeps track of printing jobs at a printing company... I started my project by drawing out how I want the databases to be configured.
I was going through a book that was made for access 2000, but I need to create this in access 97 because that's what the company has on their computers. One of the features in Access 2000 thats not in 97 is subdatasheets...
Basically, what I want to do is for each printing job, there can be a bunch of different tasks that need to be completed and billed for. For example, on one printing job, they need to design a logo, and then they need to print it out and send samples across the globe, and then they need to create a pdf, etc. This is going to be different for each job.
What I figured I would do is create a separate table to take care of all of the different tasks that are related to each job. This table would have the primary key of the job from the main table for each individual job, and then they would be related in a one (MAIN entry) to many (tasks) relationship.
Is this correct in how I want to do that? How will I do this inside a form, I want them to enter the information in table that expands as they put more tasks in?
This might be a very simple question, I just want to know if I'm going in the right direction.
Thanks much!
Hello,
I have been reading a lot about splitting databases on this forum. I still have some questions.
1) Will the FE (Front End) still show the tables?
2) Will users still be able to edit the forms, reports, etc.?
3) Will my code be hidden
4) Will all the users have up to date data showing when they open the Database?
5) Can more than one person open and input data in the database at the same time?
I also want to make an MDE copy, do I split first or make the MDE and then split?
The whole point is the following: I want the people (maximum 10) that will be using this database to only be able to do enter and view data. They should be able to generate the reports but not create new reports. I only want ONE person to be able to edit the forms, code, and reports. How would I do this.
Your help is much appreciated
Forgive me if this is in the wrong forum, so MODS, do what you will.
I'll come out and admit it right now, I'm a newbie here and have just started using Access2003. I'm in a city government so I need other users to be able to view and access my database, BUT I don't want them to be able to edit or change things. I want to be the Owner/Administrator of the database and no one else. I want to be the only person that can make changes.
Is this possible in Access 2003? Can other users only open it in Read-Only format but when I open it, it's editable?
Any info would be greatly appreciated. TIA!
--Adam
I am new to Acess, I am trying to merge 2 Access DBs and am not sure of the steps to accomplish this, if it can be accomplished and/or are there any tools to reach the same goal.
View 5 Replies View RelatedHi,
I have an MS Access database on a server which acts as a back end, with about 30 users using the data. They each have a copy of the MS Access front end located on their PC's.
Every time I make a change to the front end, I have to redistribute the new version to each PC.
What I am wanting to do is put a single copy of the front end on the server, and adding a shortcut to this front end on everyone's PC's. This would allow me to make changes to the front end without having to redistribute to all users.
What I was wondering is, if I put a single copy of the Front end on the server and simply shortcut to that front end, will it cause any problems, or are there any issues that I should look out for?
Any help or advice much appreciated!
I have a Form that refers to two Reports, both of which refer to two query's one for each. the whole lot(1 Form, 2 Reports, 2 Querys) is in one mdb file and the actual database is another mdb file. How do I get my objects to get their data from the main Data Base File? the 5 objects are acting as a small report making application.
View 5 Replies View Related:confused: Does anyone know if there is any way to link to seperate databases so that any information entered in one will update the same information in the other and visevirsa?
Thanks
My company has a database. I downloaded a copy of it to my desktop to work on it. Can I integrate my changes to the original? (copy/paste,export etc) I hope so.
View 2 Replies View RelatedJust trying to get some more replies...
This post is really aimed at someone that has experience of network databases and the problems they can pose but if you can help at all that would be great!
I work for an insurance company and we have created a database for registering complaints on. The one we currently use is a single .mdb file which can be shared by up to 60 people at any one time. This is creating a lot of problems when the queries and some VBA code are run. I therefore made a server file which is just an mdb file with data tables in and NO forms or queries. This file is stored on a shared drive on the network server. We then created a client file which contains all of the forms and queries and code. This file contains linked tables to the server so when data is entered into the form, it "Sends" it to the server mdb file. The client is installed on each of the local machines c:. The problem with this was that if we made a change to the database, we would need to reinstall the client on every single user pc. This would of took ages. I therefore made an auto-update function that checked the version number on the server and if the server number was greater than the client number, a simple .bat fiile was run which copied the updated client file from the network to the relevant users local disk.
The problem we have now is that our IT department are concered that if we make a change to the client and all the staff log in at 9am for example, it will start doing multiple copying of a file around 8mb in size to around 60 machines. They are only running on a 2meg pipe so this could cause some problems. We are not looking to change the client & server idea but does anyone know if this will have a big impact and infact if the updates for 60 machine is the equivalent or lesser of 60 people sharing the single file i mentioned earlier. If the IT dept are happy with 60 users accessing the same file at the same time, which they currently are, why are they unhappy with it updating these machine using the new method.
Would really apopreciate any thoughts anyone has..
Thanks a lot.
I have a database with two tables, Buyer and Products, with one-to-many relationship. The key of Buyer is an autonumber ID, which is the foreign key to table Products.
The problem is that i have two copies of this database with different records (with ID starting from 1 to each one) and i want to merge the databases into one.
Any ideas how to do this without lose the connection of the records?
Thank you in advance.
Hi,
How do I merge these two datbases? I have downloaded them from Microsoft online templates, here
http://office.microsoft.com/en-gb/templates/TC010178391033.aspx?CategoryID=CT101426031033&av=ZAC000
and here
http://office.microsoft.com/en-gb/templates/TC010185481033.aspx?CategoryID=CT101426031033&av=ZAC000
and I want to have the two databases as one so that there will be a fourth tab on the cintact management database with the order form on? I want to be able to link the two so I can have all the customers details and orders together and print off reports. I really have not dealt with Access before so I really dont have a clue. Any help would be truly appreciated. I am sure it is easy but I just cant work out how to do it.
Thanks very much
Danny :)
Hello-
We are using an Access database for off-site data entry. We therefore have one master database we keep in the office and then a "template" version -which is identical to the master version except no records - we bring to each site, do the data entry and then merge that data back into the Master database.
Can anyone help suggest ways to make the data merging process more efficient. The database has approx 12 tables, so I dont' want to create an append query for each one every time. Is there a way to just "merge" two identical databases??
THANKS
Hi,
I just got Access 2007 and split a database into a front and back end to see what it was like.
Is there any way of joining them back again?
Thanks
David :o
hi all!
i have recently been set a sort of project to do and i have to create a database that is for booking customers into a hair dressing salon, this is not for a real company, it is made up but i have to do it and i don't have a clue how :(
i need a customer form with all their data on, this can be random
a booking form that i can book the customers into different treatments
and this is the hard part i need a staff form and some how i need to know what days they work on so that it will come up on the booking form so that you can search for available days, its really hard and im really stuck, can anyone Please help :confused:
hope i hav'nt confused anyone
Hi all:
Would appreciate any help that anyone can offer. Have a client with an Access2K database that gives the dreaded "...No read permissions on table MSysObjects..." error. I'm trying to just get the data into a new clean mdb but Access blocks me at every turn.
Have tried compact & Repair
Have tried JetComp
Have tried TransferDatabase via code
No luck, can't get at the data.
Now here's the kicker, the database is the back end to a VB6 application. The application continues to run fine and is happily accessing and updating the database. Any suggestions about alternate ways to get the data into a new clean mdb would be much appreciated.
TIA
John
I have 2 different databases. One for Archives and one for active claims. Both databases have identical tables. I'd like to create a query that will pull information from both databases. I'm pretty sure that I can do this with a union query, but I'm a complete noob with sql.
Can someone give me an example of the sql code to use to pull information from tables on both databases?
Hi all,
Is it possible to create a query that looks over two different databases for information. i.e I have two departments at work that have seperate databases and I need to be able to search for data in both of them on the same query.
Any help would be greatly appreciated.
Hi
what i want is, if i update one database to new database then
i want to compare tables in these two databases if any table is not matched it should be retrieved,so please tel me the solution for this.
Hey all!
Okay, so here's a real puzzle, so put on yur thinking caps!
I have two large databases that are twins of eachother, with only a minor difference in a small corner of one table. Even the forms are exactly the same.
I want to split each one from thier tables, so I have databases strictly for [tables], and strictly [forms, queries and reports]...
Then I would like to get rid of one of the copy cat [forms, queries and reports] db's leaving a single [f,q and rpts] db with the ability of ANY user (not a semi-skilled db dev such as me) to have the option at opening, which db to link to for the tables (without going into the tool bar, since it is not visible to them).
Is there an EASY way for a "non-dev" user to choose which [tables db] on an opening form/switchboard?
Live long....prosper.
Hi
I have an access database which is linked to several tables in other SQL databases. I have made a list box displaying a single field from one of the linked tables. I have the list set to multiselect simple. After I've made a selection and then go to close the form I get this error message.
ODBC - Insert on a linked table 'dbo_Name" failed.
I dont want to change any data in this table. I only want to read and extract it to another table. How can I stop access from wanting to update the table.
OK I've thought about it some more, can I as part of the on click commands for the close button, clear any selections from the list prior to closing the form. That way there are no fields selected to be changed and no error message. If I can any pointers on how?
Can anyone offer any suggestions as to how I would link two databases on two servers.
Scenario:
I have a legal database that captures issues for different member associations.
There is another database that captures issues for the same associations, though there DB will be installed on a different server.
How will I link a form in the Legal database to the form and tables in the other DB?
Thanks
Hi,
I wish to have a database on my server and am trying to get the DSN to point to this. I can get the DSN to point to an ftp or a local file but not to the server. Is this possible to make this point to the server???
my asp is
<%@ Language="vbscript" %>
<%
sponsorURL = Request.querystring("url")
set outpostDB = Server.CreateObject("ADODB.Connection")
outpostDB.Open "outpost"
outpostDB.Close
set outpostDB = Nothing
Response.Redirect sponsorURL
%>
with the dsn and file name being the same, i think it looks alright, so I think it's just the DSN i'm having problems with!!! any ideas???
Thanks,
Megan.
I try to call one database forms and tables into another database without creating tables and forms.
Database where (target) i need to open forms and tables:
insurance.mdb (In the same database I click on TOOLS - REFERENCES and add accountreceivable.mdb as i need all forms and table from that database)
Database from where (source) i need forms and tables
accountreceivable.mdb
I try to call forms and tables from accountreceivable.mdb into insurance.mdb. Do i use the below function in insurance database to open tables and forms from 2nd database. If i do where should i write this function i mean in the module of insurance database or in the module of accountreceivable database. How to i call that function
Function OpenForm(byref vformname as string) as boolean
docmd.open vformname,,,,,acdialog
OpenForm = true
end function
Thank You.
I have a question that involves using access 2003. I have created a database with just tables in it, so that I can work, fix, create more tables if someone is working with the other database that I want to create. The other database will have the queries, forms and reports. I do not know how to link the two databases.
View 2 Replies View Related