I am trying to validate a time entry in a form, where the time is part of a Date/Time field. What I am trying to ensure is that the time entered is in working hours (in this case 0900 - 1700). I want to raise an error message.
Thus: 20/02/2005 08:30:45 is not OK, while 20/02/2005 09:03:45 is.
Can anyone help me on this?
I have a text box whose value is stored in a table. The column which it stores its value is of format "text" and has size "5".
What I want is for the user NOT to enter more than 5 characters!! I don't want a msgbox popping up on the screen, I want is that the user cannot enter more than 5 characters...!!
How do I do it??
I am trying to create an Access database where I can let the employees enter their time-in and time-out, at the end of their shift. I already created this function working, but running into another issue. Everyday, employees need to enter a break. Sometimes they take a break and sometimes they don't, if they work shorter hours. Thus, the break is not a default 30min and has to be enterd by the employee.
Below is the code I have to calculate the total hour:
txtCalcTime has the below code in control source:
=Int([CalcTime]/60) & ":" & Int([CalcTime] Mod 60)
Control source for this form "FrmTimes" property, in which Txtcalctime resides:
QryTimes
"QryTimes" query has the code below:
SELECT TimeID, TimeIn, TimeOut, Brake, DateID, DateDiff("n",[TimeIn],[TimeOut]) AS CalcTime
FROM EmpTimes;
This shows the total number of hours worked. But how can I make it to substract the break time entered by the employee in "txtbreak" on FrmTimes
What I have:
Table named: clients table
Form named: clients data form
The form has the client information. The client sends me a document. I review the document. If the document has the correct info needed, then I have a field named "Incomplete" that is a Yes/No field in the clients table.If the field is clicked, then I want the next date field to appear and then I can fill in the date that it was sent back to them.If the field "incomplete" field is not checked, then I don't want that date field to appear nor do I want to fill it out.
I'm new to access so I thought this would be easier than it is. I have a list of cities in a simple table . I want use this list (or a query of it) to create a validation rule for a field in a second table "City". How, either with VBA or some other method do I use the Cities database to validate entry. These tables are both in the same project.
Any help is appreciated.
I am using Access 2002 database with ASP.NET(VB). I usually try to get something working in the access 2002 GUI 1st and I am having trouble with creating the code to require that a field entry be forced to be another exisiting entry in another table. For Example:
UNIT_TABLE has fields UNIT_ID(key), and UNIT_NAME having values of:
1 Tigers
2 Bears
3 Sparrows
BATTLES_TABLE has fields BATTLES_ID(key), ATTACKER_MAIN, and DEFENDER_MAIN
I want the ATTACKER_MAIN and DEFENDER_MAIN choices to ONLY be members from UNIT_TABLE.UNIT_NAME
I set up a combobox and lookup in BATTLES_TABLE as follows:
SELECT UNIT_TABLE.UNIT_NAME FROM UNIT_TABLE ORDER BY UNIT_TABLE.UNIT_NAME;
this OFFERS the CHOICE of any of the 3 clans (ie Tigers, Bears, Sparrows)
but I cannot not FORCE the USE of these....because the end user can option to enter in anything else.(which is not wanted).
How do I add SQL to the LOOKUP such that... the user can ONLY choose to enter text that EXACTLY matches an Already existing entry in the UNIT_NAME field?
I tried to enter a validation rule:
[ATTACKER_MAIN] In ([UNIT_TABLE.UNIT_NAME])
I get an error that the field 'UNIT_TABLE.UNIT_NAME' does not exist.
Thanks for any help with this validation problem.
HKP_MACK
I have input boxes in access form. I want to limit entry of * in one of the input fields named "Name" anyway If * is found anywhere in anyform of data entry then it should show warning.
View 14 Replies View RelatedI am looking at the public function routine, that validates the password entry. I want to know how i can make a message pop up with the specific error the user has made on entry.
Public Function ValidatePwd(varPassword As Variant) As Boolean
Dim blnValid As Boolean
Dim blnValidCriteria As Boolean
Dim intChar As Integer
blnValid = Len("" & varPassword) >= 4 And Len("" & varPassword) <= 12
[Code] ....
I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"
This rule works when the data type is set to text, but not on Date/Time with short date set as format
How to get a Date/Time type to accept only one from these four values.
I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"
This rule works when the data type is set to text, but not on Date/Time with short date set as format
get a Date/Time type to accept only one from these four values.
I'm trying to refine another of my time entries. To enter a Short time (eg 10:35), I have to type in the four digits AND the semi-colon in the middle.
I would like to be able to enter only the four digits with Access making it into the correct format.
I have achieved a similar effect in Excel using code like
TimeVal = Left(Value, 2) & ":" & Right(Value, 2)
I tried writing something similar in the Before_Update Event, but it was rejected!! Any ideas? - Thanks, Andrew.
Hi, hope someone has an idea of where to start on this.
Our company offers projects to multiple contractors and we have to enter when we spoke to them and their response. I put a textbox with default of Now(), thinking these would be recorded in real time and it would be no effort at all. But the offers are frequently entered days later, and keying in dozens of specific dates/times in the long format is very irritating for users.
Does anyone know of something similar to the DatePicker or calendar popups that will let you use arrows or comboboxes or something to quickly enter a time? We record date, hour & minute (no seconds) because it updates the contractor's order on the rotation list (i.e., next call is made to the contractor who has been waiting the longest for an offer). No ActiveX please, we're in secured network environment.
Thanks in advance.
Hi I'm a newbie in access, i've read almos all of the threads posted
my problem is that I need to register times
for example
I ask for user number (this is an exlcusive number)
and by the time User clicks on Accept i need acces to record this time
user 19394 time 7:35 am (for example)
can this be done in access??
and another i need acces to display a pop-up message like
"User 19394 Jhon Smith
is this correct?"
can you help me
We have a new contractual requirement to track all time spent on Military contracts and report it to our Prime Contractor annually.
I am trying to put into Access 2010, basically the same functionality that I have built into Excel time sheets for years; that is simple entry of time in military time using 3 or 4 keystrokes depending on the time of day.
I have a table which records an employee's employee number and job that he or she is working on. I have formatted fields to short for Start Time and Stop Time, and I have a Calculated field also formatted short for elapsed time, however I need to have it simplified to where there is no colon separator on key entry in the form to 700 for 0700 hrs military and 1317 for 1:17 PM.
I will be using this database on several computers, but only a couple that will be used for time entry.
The Excel spreadsheets work well, but I have found them cumbersome trying to dump all the information into a Master spreadsheet from several different individual spreadsheets and I am using Access as our ERP so it will save time if I just add a simple form to track time from there putting it in the hands of the Repairmen and save someone from data entry late.
I've got a data entry form bound to one table. The form has four buttons:
- Clear Fields
- Cancel
- Save and exit
- Save and add another (which should save the user input to the subform/table, clear the input fields, and allow the user to add another record)
I can't quite seem to get the "Save and add another" button to work. When I put some information in the input fields and click the button, it saves it to the subform/table perfectly, but when I try to do it again, it just edits the last record (the one just created).
How can I get that button to place the information from the input fields in a new record every time?
The _Click event for the button looks like this:
Code:
If Len(Me.field1 & Me.field2 & Me.field3) > 0 Then
Me.Refresh
btnClear_Click
DoCmd.Save
End If
I have two tables, One table containes customer name, etc., tblcustomers the other table contains the tbltimelog, log of activity start time end time. No issues. I want to generate a form based on the dateofentry for the time record. I am not able to get a summary lets say I spent 20 hours on ABC and 20 hours on CBS. If I spent 3 different days on ABC and 6 different days on CBS it will not add them together it will list it ABC 3 times and CBS 6 times. I have tried the distinct function but it doesn't work because the date is distinct. Is there a way to do this as an SQL or whatever. Thinking I could just create a new table and calculating the totals but that seems to be a waste.
View 3 Replies View RelatedI have a database that makes use of standing orders. That means that if a client has a standing order to receive products during for example 4 time as year (quartely at the end of the month). to automate the new entry by copying an old entry in the database.
Let's say I have a client where we will have to send a product at the end of June, it will look at a field where the next send date is, and when it reaches 2 weeks for that date, to create a new entry in the database based on that entry. This way, it will pop-up in our open cases and we are aware of it and also will be visible in our report.
I am working on creating an access database for tracking physical assets linked to locations. I need to make a combo box list to show items other than the current location of the asset. Basically I need it to refer to last enery of the user and define the new possible entries. so we have a unique relationship between location and asset. The assets and location will always remain fixed and there is never going to be any addition. I am creating a web form so that it can be uploaded into sharepoint.
View 3 Replies View RelatedI have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View Relatedhow to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies View RelatedI have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
Formatting issue regarding elapsed time calculated using DateDiff().
I understand that you can specify the output value for DateDiff(). In my case I have chosen "n" for minutes. Each result in my query shows the correct calculation in terms of minutes.
[PunchIn] = 11/23/2013 8:11:28 AM
[PunchOut] = 11/23/2013 5:43:30 PM
[ShiftLength] =DateDiff("n", [PunchIn],[PunchOut]) = 572 minutes.
Now when I try to format the result in terms of H:MM (be it in a form or a report) I get varied results. I'll illustrate an example below:
=Format(([ShiftLength]/60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 10.32 Not correct
=Format(([ShiftLength]60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 9.32 This is correct but I need my result to be in the form of a decimal such as my next example
=([ShiftLength]/60) Returns 9.53333333. Getting there but how do I have this result only show two decimal points 9.53?
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View Relatedso i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View Related