Time Execution Question
Mar 14, 2005Hi,
how can i create a comand button that open a form at predifined date?
example: if current date=2005/14/12(yyyy-dd-mm) then open form "example"
thnks,
Kopas
ADVERTISEMENT
Query Execution Time
Jan 3, 2006I have a query, it joins a local table to a remote table (Oracle Database Table) which makes it slow(ish).
When I am in design mode and i click the "View Datalist" button, which visually shows me the results, the query executes in about 12 seconds.
When I use the "!" Button to physically Execute the Make-Table Query, it takes hours.
What things should i look for that might cause this problem? Where do I need to optimize.
To me it seems rather odd that the query would execute so fast when i view the data than when it physically executes the data.
Same speed problems when i just run the query as a Selection Query as opposed to the Make-Table Query, so it's not an issue of writing to disk/etc.
Want To Stop Execution!
Feb 12, 2006i have created a new utility DB that has only one form..when it opens I set the startup form "Main" and on the OnOpen event of this form I have some code to open another database and close this one...
this means that whenever i open this database, it opens, opens up the other one and this utility DB closes...and i cannot access it coz it always opens and closes automatically...how can I stop it from executing to be able to edit its VB code?!
Thanks, this is driving me mad !
DTS Execution Via MS Access
May 23, 2007Hi Folks,
I am wondering if it is possible to execute a DTS package via Microsoft Access. I have done a bit of research and cannot seem to really find anything that claims this is possible or how to go about to get it to work. I am running SQL Server 2000 which has quite a few DTS packages ... it would be really neat if I could just create a small interface in Access whereby a form has a few buttons on it that can be clicked and the DTS packages can be executed on the server, this way folks won't need to log on to the server and run the DTS packages via SQL Server Enterprise Manager. What would REALLY be awesome would be if values can be passed between SQL and Access but I think if that is possible it would be quite an animal to achieve (I know it is possible via Visual Basic programming but not really worth all the work to create an independent program just to run a DTS package or pass a value). If anyone can provide me with any information or where to look I would appreciate it.
Thanks,
Joe
Form Execution Bug
Jul 3, 2005Hi everyone,
This is my problem. Almost all the time(90%), I open the main form of my application and a large part of the form is blank(white). If I open it from the Database window it often work well and all the form is visible.
When the bug occur, If I just switch from Access to another application like Internet Explorer and I come agian to Access then all the form is visible.
Is someone ever seen that kind of bug. What that can cause that problem. How can I solve it?
N.B. There is a lot of controls on my form and I guess that bug can be linked with it. Seems like Access is trying to open my form too rapidely.
Unsuccessful Execution Of SQL Statement Within VBA Codes
Jan 1, 2006I have a problem about running SQL statement in VBA code. I will appreciate a looot if you can help me solve the problem ASAP.
I tried to run the following statement in my VBA code to update a table in my database:
DoCmd.RunSQL "UPDATE TBL_GRANTBASEDATA, TBL_QUARTER SET TBL_GRANTBASEDATA.Retire_QTR = TBL_QUARTER!QUARTER WHERE ((([TBL_GRANTBASEDATA]![Retire_Date])<=[TBL_QUARTER]![End_Date] And ([TBL_GRANTBASEDATA]![Retire_Date])>=[TBL_QUARTER]![Start_Date]));"
It turns out that the table will not be updated if I run the above SQL statement with my other VBA codes. (ACCESS doesn't give any error messages even though the database was not updated.) But if I run the SQL statement by itself rather than within the other codes, the database will be updated successfully. (When I set a breakpoint at the above SQL statement and run it manually within the other codes, the database are updated successfully too.)
Apparently, the SQL statement and the other codes don't have any syntax errors. I wonder why ACCESS doesn't execute the SQL statement when the SQL statement is put within the other VBA codes. Is it because the table it tried to manipulate was locked by the other codes?
The following are all the VBA codes including the SQL statement I'm talking about. When I run the following codes together, the database is not modified by the SQL statement (the last sentence). But if I run the last sentence and the other codes separately, the database was modified successfully.
Dim rstDataLoad As New ADODB.Recordset
With rstDataLoad
Set .ActiveConnection = cnnSHELL
.CursorType = adOpenKeyset
.LockType = adLockOptimistic
.Source = "SELECT TBL_GRANTBASEDATA.* FROM TBL_GRANTBASEDATA;"
.Open
End With
'Calculate Retire_Date
rstDataLoad.MoveFirst
Do While Not rstDataLoad.EOF
Calculation omitted.
rstDataLoad.MoveNext
Loop
rstDataLoad.UpdateBatch
rstDataLoad.Close
Set rstDataLoad = Nothing
DoCmd.RunSQL "UPDATE TBL_GRANTBASEDATA, TBL_QUARTER SET TBL_GRANTBASEDATA.Retire_QTR = TBL_QUARTER!QUARTER WHERE ((([TBL_GRANTBASEDATA]![Retire_Date])<=[TBL_QUARTER]![End_Date] And ([TBL_GRANTBASEDATA]![Retire_Date])>=[TBL_QUARTER]![Start_Date]));"
Wait For Shell Execution To Finish?
Jun 19, 2007I'm using hte Shell() function but this doesn't wait for the executable file to finish so I'm looking for a command line function that would wait until the executable file is finished executing...
I saw this function WaitFor but it is not supported in MS-Access? So, what do I do?
Thanks...
Modules & VBA :: Call Value From A Text Box During SQL Execution
Dec 20, 2014I have this segment of code that adds data to fields FName and FPath in the table Files. It works fine but the syntax is a nightmare with all the double quotes and symbols.
Code:
strSQL = "INSERT INTO Files " _
& " (FName, FPath) " _
& " SELECT """ & strTemp & """" _
& ", """ & strFolder & """;"
CurrentDb.Execute strSQL
I have another field in the table Files called CompletedBy that shows who updated the table (they type their name into a textbox Text1 before clicking a command button to run the code). I would like to add this data to the table during the execution of strSQL. All the records added to the table Files will have that value in the CompletedBy field (say, Bob Jones).I tried the below changes but the code doesnt work.
Code:
strSQL = "INSERT INTO Files " _
& " (FName, FPath, CompletedBy) " _
& " SELECT """ & strTemp & """" _
& ", """ & strFolder & """ & Me.Text1 & """;"
CurrentDb.Execute strSQL
How would I add a value in field CompletedBy, from the textbox Text1, to all records added to table Files when the code is run?
Query Execution And Record Modifying
Dec 8, 2014whenever I run/execute a query in Access it is modifying the first record on the table in which it is calling the data from.For example if the first record might contain the following:
Record A: John Doe, Oct, 2014, Account is Active
And lets say I am running a query to pulling records from Nov 2014.The Month and Year Fields in the above example for Record A gets modified to the query search parameters for Nov.Is there some of of record lock or controls that I need to adjust to prevent this from occurring?
Disable Datasheet From Poping Up After Query Execution
Sep 24, 2007I am trying to take input for my reports based on a query result dynamically for which i dont want to display the Datasheet after the execution of Query ,inturn i am displaying results in Report. Any help on this would be appreciated.
View 14 Replies View RelatedHow To Stop Query Execution At The Form Start
Dec 19, 2005Hi
I am a new user to Access. I created couple of forms using wizard, but when I view them, they show me all the available data by default. I want to stop this, if anyone can help me plz.
RMA
Forms :: How To Force Execution Of A Query When Changing Record
Jul 13, 2014I have the following tables:
Supplier
Supplier# [Other columns]
Material
Supplier# Material# [Other columns]
DeliveryHeader
Delivery# Supplier# [Other columns]
DeliveryDetail
Delivery# Supplier# Material# [Other columns]
I've created a form based on table DeliveryHeader with a subform based on table DeliveryDetail. The two are linked by Delivery# Supplier#.
On the form, Supplier# is a combobox that lists all suppliers from table Supplier.
On the subform, Material# is a combobox that lists only the materials supplied by the supplier selected with form's Supplier#.
The problem is that this second list always shows the materials of the first listed supplier. For instance, when the form is loaded, it shows delivery #1 with all its details on the subform. Suppose supplier loaded to form is #1.
1) If I use subform combobox, it shows correctly supplier's #1 materials. But then, whatever delivery I navigate, it always shows supplier's #1 materials.
2) If I navigate to another delivery without using subform combobox, suppose I stop on a delivery where the supplier is #4, then subform combobox shows correctly supplier's #4 materials. But then, once again, whatever delivery I navigate, it always shows supplier's #4 materials.
I've spread Me.Requery here and there but without any success. What trick must I apply to force the execution of the query of the subform combobox Material# each time I navigate to a new record on the form?
General :: Pop Up Process Running MsgBox And Close Automatically On Execution
Aug 23, 2013I have a form that loads when the database is open, and the form has buttons etc. that leads to queries and reports in the database. (Queries open in a form). Since most queries take a while to load, I was wondering if there is a way to Pop up a message box stating "Please Wait, Query is running..." (or something like that), and once the form opens the MsgBox should close automatically. (The user should not have to hit Ok button.)
Most users of this database would have restricted access such that they would not have navigation pane and toolbar visible - hence I want to make it a touch more interactive when a process is running...also if someone is new to access they might not notice that taskbar status and I don't want them thinking the program is stuck etc..
Modules & VBA :: Excel File Opens And Code Stops Execution
Nov 12, 2014I'me running on Win7, Office 2010, Acc2003 format (.mdb), writing data to Excel 2010 (.xlsx)I have code to create an Excel file, send record set data to it, and then add some formulas and formatting. I was trying to tune up the formulas, when I got a pull back:Access VBA code suddenly stops running, and the file gets displayed in Excel
Code:
'ApXl is Application.Excel
'xlWSh is the Excel WorkSheet
'rst is my DAO.Recorset
[code]...
The same happens when I have ApXl.Visible = True
Time Format - Short Time Displayed As Medium Time
May 23, 2006I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
Time Format - Short Time Displayed As Medium Time
May 23, 2006I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
Reports :: Auto Populate Date And Time Every Time Form Is Updated
Nov 8, 2013I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View RelatedForms :: Add Time Value To Time Data Type SQL Server Field In Access
May 6, 2015how to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies View RelatedReports :: Attendance Database - Show Time In And Time Out For Specific Date
Apr 3, 2014I have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
General :: Formatting Time Conversion - Calculated Elapsed Time
Dec 3, 2013Formatting issue regarding elapsed time calculated using DateDiff().
I understand that you can specify the output value for DateDiff(). In my case I have chosen "n" for minutes. Each result in my query shows the correct calculation in terms of minutes.
[PunchIn] = 11/23/2013 8:11:28 AM
[PunchOut] = 11/23/2013 5:43:30 PM
[ShiftLength] =DateDiff("n", [PunchIn],[PunchOut]) = 572 minutes.
Now when I try to format the result in terms of H:MM (be it in a form or a report) I get varied results. I'll illustrate an example below:
=Format(([ShiftLength]/60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 10.32 Not correct
=Format(([ShiftLength]60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 9.32 This is correct but I need my result to be in the form of a decimal such as my next example
=([ShiftLength]/60) Returns 9.53333333. Getting there but how do I have this result only show two decimal points 9.53?
Forms :: Update Time Portion Of Date / Time Field
Aug 29, 2013I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View RelatedPrevent Double Booking Using One Date And Start Time With End Time
Apr 10, 2015so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View RelatedModules & VBA :: Calculating Elapsed Time Within Time Period
Dec 1, 2013I have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
Calculating Total Time But Excluding Overlapping Time
Aug 22, 2012I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
View 8 Replies View RelatedIgnore Time In Date And Time Field
Mar 6, 2007Hi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
Time Management - Simple Time Clock
Jan 9, 2006Hi all, I havent' been around in a while (toddler, work, getting my BS degree and new baby coming in a week and a half) so I am hopefully not asking a previously posted question.
I'm suspecting my new work isn't accurately paying for the hours worked. I made a quick simple DB where I input my punch times in short time format. There's the typical In, Out for Lunch, In from Lunch, and Out. I've got it correctly adding the times so that it reports the total hours worked per day, though, in order for it to display correctly, that total is in short time as well.
The problem is, when I group a week together, as soon as the sum of the totals reaches 24 or more, it goes back to 0, as it's on the idea that there's only 24 hours in a day.
Hopefully, it's just a formatting issue or is there a function to convert the times (or just the sum) to number of hours?
Thanks and Happy New Year to all.
-Jim