Hi all, I havent' been around in a while (toddler, work, getting my BS degree and new baby coming in a week and a half) so I am hopefully not asking a previously posted question.
I'm suspecting my new work isn't accurately paying for the hours worked. I made a quick simple DB where I input my punch times in short time format. There's the typical In, Out for Lunch, In from Lunch, and Out. I've got it correctly adding the times so that it reports the total hours worked per day, though, in order for it to display correctly, that total is in short time as well.
The problem is, when I group a week together, as soon as the sum of the totals reaches 24 or more, it goes back to 0, as it's on the idea that there's only 24 hours in a day.
Hopefully, it's just a formatting issue or is there a function to convert the times (or just the sum) to number of hours?
Since you can add Calindar in access using activex so that I can select any date and pass that on to a field in a form, is there any way you can add a clock using activex so that I can select any time that I want to put in to a field? any suggestion? Thanks.
I have a complete working timeclock and trying to add the forms within the navigation form. I know I have to go back and re-reference everything and have already done so with the queries. But I cannot get the setfocus to work.
Here is the setup.
NavigationForm (navigation form) frmClockIn (top form) frmClockIn_SUB (bottom form) Open Navigation > Time Clock. Select an EmployeeID from the dropdown Click on clock in. (successful) cboEmployeID goes blank and try selecting the same employeeID to clock out and I get a debug at
Me.frmClockIn_SUB.SetFocus
I think there is a problem with my cboEmployeeID_AfterUpdate() as well.(related?) which used to be Private Sub cboEmployeeID_AfterUpdate() me.refresh End Sub
I have replaced "me.refresh" with "Me.frmClockIn_SUB.Form.Refresh"
(It used to break here, but not after I changed it.)
Not too sure where to set these forms to in the code
I’m adding a new function to our Costumer Relations Management system – Time management. Or maybe “time registration” is a better definition for it. The idea is that our consultants can add their hours into our CRM, either from the “Project”, “Tasks” or “Costumer” part of the CRM. Note: This is a tool to keep track of hours spent on a project, not a planning tool.
I’ve made the input-form for the records (Date, ClockStart, ClockStop, TimeSpent, InvoiceHours, etc.). But now I’m basically without a clue on where to start – I want to make a function almost like the calendar in Outlook, where the consultants can input what they’ve been working on, say between 13:00 and 14:00.
It doesn’t have to be fancy graphically, but functional and give a good overview.
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
I have a linked SQL table with a Date/Time field called DATE. ALL I WANT TO DO is pluck all the records with a single date from that table.
Predictibly, the date field has values like this: 9/11/2006 12:40:46 PM
If in the MS-Access query I use criteria of #9/11/2006# I get other dates also. I have tried variations on Date() or DatePart but those either fail or don't work. Sheesh.
ULTIMATELY, I want to restrict records to a specific date, and then a certain hour of that date, so if you can include this bit of additional logic in your response, that'd be great too. Note: I am trying to structure a query, not write code.
Trying to make a simple clock inside my form. So far I got my clock but it isn't running. It only get's the time when I open the form but I want it to keep track of time.
Searched the forums but couldn't find anything that relates to this problem.
Sorry about this but I have two forms in a split database, one for data entry, one for data editing. The underlying record source is a query pulling data from multiple tables which worked fine until we had to move the backend of the application. Now whenever anyone opens the data entry form (add mode only) there are no fields on the report for them to complete; they are confronted with a blank screen. The data editing one works fine, but this one cannot be put onto general access because only four people out of about 25 are allowed to edit the data.
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
I have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
Formatting issue regarding elapsed time calculated using DateDiff().
I understand that you can specify the output value for DateDiff(). In my case I have chosen "n" for minutes. Each result in my query shows the correct calculation in terms of minutes.
[PunchIn] = 11/23/2013 8:11:28 AM [PunchOut] = 11/23/2013 5:43:30 PM
Now when I try to format the result in terms of H:MM (be it in a form or a report) I get varied results. I'll illustrate an example below:
=Format(([ShiftLength]/60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 10.32 Not correct
=Format(([ShiftLength]60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 9.32 This is correct but I need my result to be in the form of a decimal such as my next example
=([ShiftLength]/60) Returns 9.53333333. Getting there but how do I have this result only show two decimal points 9.53?
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
I have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday EXIT FUNCTION ELSE IF [PunchOut] ISNOT Between Midnight and 0559 hours EXIT FUNCTION ELSE DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
I am trying to create an Access database where I can let the employees enter their time-in and time-out, at the end of their shift. I already created this function working, but running into another issue. Everyday, employees need to enter a break. Sometimes they take a break and sometimes they don't, if they work shorter hours. Thus, the break is not a default 30min and has to be enterd by the employee.
Below is the code I have to calculate the total hour:
txtCalcTime has the below code in control source: =Int([CalcTime]/60) & ":" & Int([CalcTime] Mod 60)
Control source for this form "FrmTimes" property, in which Txtcalctime resides:
QryTimes "QryTimes" query has the code below: SELECT TimeID, TimeIn, TimeOut, Brake, DateID, DateDiff("n",[TimeIn],[TimeOut]) AS CalcTime FROM EmpTimes;
This shows the total number of hours worked. But how can I make it to substract the break time entered by the employee in "txtbreak" on FrmTimes
I have finger print machine and i already connect to it and get all log.then i tray to get data and here is the code that im using
SELECT Format(CHECKINOUT.CHECKTIME,"dd/mm/yyyy") AS CDate, IIf([CHECKINOUT.CHECKTYPE]=I,Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm")) AS StartTime, Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm") AS EndTime, USERINFO.USERID, USERINFO.Name, CHECKINOUT.CHECKTYPE FROM CHECKINOUT INNER JOIN USERINFO ON CHECKINOUT.USERID=USERINFO.USERID WHERE (((Format([CHECKINOUT].[CHECKTIME],"dd/mm/yyyy"))='10/04/2014'));
I need a Select Query to display data on a form. When an order is appended to my table the field named Printed is updated with the time it was appended. When my form opens it needs to display the field Printed and a field I call MinutesFromPrint. This field needs to display the total minutes elapsed from the time in the Printed field to the current time. My expression is not working.
MinutesFromPrint: DateDiff("n",[Printed],Now())
Here are a couple of samples of my results when I run the query at 7:49 A.M.:
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only. ([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null) How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have a link table with a field in GMT time. I want to convert the times to local time in a query. I know that I should use DateAdd, but I am just wondering how to know summer and winter time. On the summer our local time is +2 GMT and on winter +1.
