Hi,
Need advise on how to display on my report the criteria that i had specified in the parameter query even if the result is nil.
How can this be done??
Thanks!
I would like to display the value of my parameter query into the title of the report.How could I do this on Access 2007?So far I have made another field in the query and called it ParaDate: [JobDate]
Then in the report title I wrote:
=Limousines booked for&" "&[JobDate]
But it's not working.
How to display only the first few records in a subreport but keep the grand total of the report itself. When I limit results in query; it gives me the records but only totals for that set. I thought about putting code in the on format in detail section like:
Code:
If me.control.value >10 then
me.control.visible =false
but doesn't work.
I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.
I am already tried to put id_organizacija in [ ] but that didnt solve problem.
Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija
[Code] ....
This may be a really dumb question, but those are the easiest to answer right? ;)
Anyway, I have a parameter query where the user enters in certain criteria that it wants to look up. If there are no results that pertain to what a user enters in, is there a way that I can put in an error message that tells them that there are no results? Right now it just goes to a blank form/report/table (depending on what they are searching). I'd like something to pop up telling the user that there is no information cooresponding with what they've typed in.
Thanks.
When I query my database I want to return groups of records. The groups differ from one another based on one field (Employee ID) -- So one group with Employee ID# 1 may have 2 records and another group with Employee ID# 2 may have 5 records, etc. My question is: What is the best way to display these groupings and allow the user to scroll or navigate thru the different groups easily?
Any help is appreciated.
Thanks
I have been doing a lot of searching on the forums, and I can't seem to find an answer to my problem.
I have a form that uses a query to create an e-mail. This e-mail lists all of the different tests to perform on a sample of a product. My table set up is as follows:
tblProducts
ProductID
ProductName
tblTests
TestID
TestName
tblSamples
SampleID
ProductID
TestID
The purpose of this is to send out a sample of a specified product and perform 1 to XX tests on it.
Currently, my query is giving these results:
Product Test
Product1 Test1
Product1 Test2
Product2 Test1
Product2 Test2
Product3 Test1
I would like for it to format the data like this:
Product Tests
Product1 Test1, Test2
Product2 Test1, Test2
Product3 Test1
Any suggestions on what I should do?
Thanks in advance!
If there's a post out there that addresses this, please point me in that direction as I've had no luck.
I have my queries listed in a table. On my form I have them listed in my combo box. The user selects the query they want and hits the command button "Run". I would like to show the selected query in a subform on the main form and then give the user the option of selecting another command button to export the query to Excel.
I thought it would be as simple as setting the recordsource of the subform to the query name in my combo box, but that doesn't work.
Current code to run query in separate window:
Command button "Run"
Private Sub Command9_Click()
DoCmd.OpenQuery Me.Combo2.Column(1)
Attempt at getting what I want:
Privat Sub_Command9_Click()
Forms!frmQuerySelection!sfrmQuery.Recordsource = Me.Combo2.Column(1)
or perhaps
sfrmQuery.Recordsource = Me.Combo2
Am I even close?
Thanks
I have created a query with parameters keyed in from unbound textboxes on a form. Does anyone know of a way to display the results (queried) in the sub-form of the same form (main) the textboxes reside? I have the query set up to create a table but when I use that table (or the query itself) in the subform I get the error message:
"The database engine could not lock table "tablename" because it is already in use by another person or process."
This seems appropriate because I am querying for results, but is there any way to get the results of a query into a form, rather than the more common pop up datasheet? I have tried several macros to open and close the tables - queries - copied tables ..re-opened forms....etc, but can't get it to work.
Thanks, for any help, I have spent some time on this one!!!
I have a parameter query that contains information on a list of people and contains 3 checkboxes: alumni, parent, business
In this query, I am trying to use parameters to filter the results based on these three fields i.e.
true, false, true would return all records where either alumni, business or both are true, and parent can be either true or false.
false, true, false would return all records where only parent is true, and the other fields do not matter.
I have a totals query that shows results in a chart. It takes a parameter to limit results, by a combobox in a form.
Parameter in the query includes the OR "*" expression, in case someone wants to get the results unfiltered.
The Combobox in the form, has an AfteUpdate event that opens the chart (form) every time its value changes, by the [DoCmd.OpenForm "ChartForm" , acNormal] expression.
I don't know how to make it open the ChartForm when no parameter is selected in the combobox.
I have a few update queries that will check X number of items, based on what the user inputs.
What I want to do (if possible), is return the number of items selected based on what they type in a message box.
I have set all warnings to false for update queries.
Example:
User runs the "Check Items By Location" query via the form, then receives a message stating "[Total Selected] Items Have Been Selected from [Location]."
Hi, can anyone tell me how to doubleclick on field (on a form) and it opens up a form that shows bounded filtered results. I have a sub form which has details supporting summary numbers. I want my user to doubleclcik on the currency field and the detail supporting that sum total, pops up automatically. Any help please? :confused:
View 2 Replies View RelatedHi,
I have created a form (Form1) based on a table (Table1) and also a Query based on this table (Query1). I calculate a field in the query (Expr1: [column1] + [column2])
Now i have created a text box on Form1 that should display Expr1.
I know I could also calculate the value directly via the expression builder, but I would prefer to simply display Expr1 from my query. Which is the syntax I have to use in the Expression Builder?
I tried "= [Query1]![Expr1]" but it does not work.
Thanks for your help
Tigrou
I have a text box, I have pasted this into the control source:
=[qryIndividualFaultVolumes]
then on a button I have this code:
me.qryIndividualFaultVolumes.requery
However, I get a Method or data member not found error when i click the button?
I am trying to allow end-users to only use buttons to navigate and display records in my database (so they don't know access is in the background) I have query that runs when they press a button but after they run it there is no way to get back to the main interface screen i.e. there is not a place to put another button and close the query. I was looking into creating a form to display the query results in datasheet view but it is not appearing the way I want. I inserted a subform and the results got better but I also do not like the way it displays because the user can see the subform, simple solution to get my data to display in the form so a user can view the results similar to datasheet view?
View 3 Replies View RelatedIn my form I have a dropdown box. There are 7 values and based on the value it will run that query in sql server. I would like to have the query open in the form instead of opening up on a different tab. Currently on the command button click there are a bunch of if statements depending on what is selected on the combo box. Each value has a query associated with it because there are 7 different sql server DB's. The code is slightly different with each query.
View 2 Replies View RelatedI have created form and would like to display query results on form (in textbox), which is executed based on combobox change event on the same form.
View 3 Replies View RelatedI have a crosstab query. There is a field for row headings that specifies QUARTER (Q1,Q2, Q3,Q4) and another field for row headings that specifies YEAR(2015,2016,...etc)
I want to be able to have the user input the criteria in to a box and filter the crosstab query to then display the filtered results.
Right now on my column headings I have MONTH.
When I try to reference the form in the criteria, I always get the error
"The Microsoft Database Engine does not recognize ..... as a valid field name or expression"
Does this mean that you can not filter crosstab queries?
In MS Access 97 I have a basic query based on a single table. When I use "Between [Start Date] and [End Date]" as the criteria in a date field it returns incorrect records.
It works correctly on date fields that are not calculated but not on the date field that is calculated. If I type in the actual dates in the criteria (instead of the prompts) it returns the correct records.
Is there a solution to this behaviour? I need the users to be able to input the dates.
Thanks.
P.S. I have tried using the base query as a subquery but I still have the same issue in the second query based on the subquery.
It is possible to create a parameter query in Access that will search for records that match the parameter entered by the user AND contain all other records that have that value plus other text.
For instance you may want Access to return all records that begin with the letter Q.
To do this you need to enter the following expression into the criteria row:
Like [Find records beginning with:] & "*" Or Is Null
The user can enter a Q and the criteria concatenates the wildcard character * to this parameter value, to find all text strings that begin with a Q.
By also using Or Is Null in the criteria the user can enter a blank value into the parameter query to return all records, even if this field is blank.
But how do I search if i want all the records with John anywhere in the field???
I have a form with a subform (FindBuffer_Form) which I built from a Query (FindBuffer_Query) within the query criteria I have the following (Like "*" & [Select the main Batch Number] & "*")in order to search a particular number.
I want to be able to run the Query from a command button on the main form and have the results appear in the subform, If I have the Source object of the subform set to Query.FindBuffer_Query I get prompted twice to answer the Criteria before the form opens, after the form opens the subform is generated as per the search criteria.
Ideally, I want the form to open with no data in the subform run the query from command button and have the result in the subform.
In Access 2007, I put into the table, in a certain field, a certain word field, so I put into design view for that query, in that field, Like "Field" and even though the word field is in that table in that field, it doesn't show it in that particular query?
View 14 Replies View RelatedHello Everybody,
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal
Private Sub Command19_Click()
On Error GoTo Err_Command19_Click
Dim stDocName As String
stDocName = "apNewPres"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Exit_Command19_Click:
Exit Sub
Err_Command19_Click:
MsgBox Err.Description
Resume Exit_Command19_Click
End Sub
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
Thanks for any help
I have a table that has three columns: Nationality, Gender, and Date. First I had the problem of grouping the Nationality column by Gender. That i resolved by creating a crosstab query. Now, I want to put a criteria on Date field so that when the query is run it will ask for the date input and will only show the Nationality and Gender result for specific dates. But when I write something in Criteria field it shows an error saying: "The Microsoft Access database engine does not recognize "[Registration Date]" as a valid field name or expression"..
View 3 Replies View RelatedI use this on most queries where I need to return all results if the form field is left blank. Works like a charm every time...
Like [Forms]![frm_main_menu]![Week] & "*" Or Is Null
except for this time..I need to filter by week number (52 weeks in a year)...problem is if I enter week "1" I also get weeks "10, 11, 12, 13, 14, 15, 16, 17, 18 and 19".