Toggle Box And Queries

Aug 22, 2006

Hi.
I have never used a toggle button on a form before, and have searched the previous threads, with this one (http://www.access-programmers.co.uk/forums/showthread.php?t=113115&highlight=toggle+button) being the most relevant I think.

I need a toggle button, so that when it is pressed, it runs one query, and when depressed, it runs another. Basically, it is used as a add/Delete button sort of thing....but the add is an append query and the delete is a delete query.

I can't seem to change the code in the above sample, can anyone help?

Many Thanks.

Frank.

View Replies


ADVERTISEMENT

Toggle Form Between Queries

Jun 18, 2015

I have a form that is basically just a matrix/visual of a query. Is there a way to "toggle" between the use of queries/data?

i.e. have a drop down and select query, "SH-LS", "FPH-ENV" or "FPH-Asset" and it will show the corresponding data. The queries are all set up the same, just gathers/calculates different criteria.

View 7 Replies View Related

Forms :: Toggle Button To Add Not Like To Multiple Queries

Apr 8, 2014

I have a form with about 10 subforms on it, all of which have queries as source objects. All of these queries are based off the same table which contains a field for Customer. What I would like to do is have a toggle button on this form that, once pressed, essentially adds a "not like" criteria to each of these subforms' queries EXNot Like "Customer_A"). When depressed, the queries/subforms should exist as is.

My first issue is that when I add a toggle button, the control wizard does not start. It starts up fine for any other control, however. For example, I imagine that on the After Update event of the toggle button I would requery each of the subforms, but I'm not sure how to add the "not like" criteria to each of the underlying queries.

View 1 Replies View Related

Queries :: CheckBox On SubForm Based On Query To Toggle Criteria

Aug 16, 2013

I have a SubForm "assignments" based on a Query, which has criteria to filter dates and also to filter 0 and 1 of the checkbox ...

The question is:

How do I put in that SubForm one or more Checkbox to "enable" and "disable", only the criteria of such query? So, toggle, for example, those jobs that are not completed (Checkbox of the query=0) and those that do ...

View 1 Replies View Related

Filter With Toggle

Oct 25, 2005

Hi !

I have in Form textBox and toggle button.

How could i Filter Form by Value in TextBox? (when toggle button is pressed, Form show records filtered by texbox, when unpressed - shows all records.)

Thank You in advance!

View 2 Replies View Related

Toggle An Option

Jun 21, 2007

Say I have two bubbles (options,buttons, whatever you know them as) I want the system to be set up so that only one of the two can be "true" at a time. Say they are titled Option1, and Option2. What code would I put on them so only one can be "true" at a time. If Option1 was true, and then someone clicked on option2, I want it to cause option 1 to go false.

Any help would be greatly appriciated. THANK!

View 3 Replies View Related

Mass Yes/no Toggle

Jun 13, 2007

Hello,

I'm trying to update this movie database, and I need something to save me time, not to mention my finger.
One field in this db tracks if a movie is colour or black/white. In the old/existing db, that was done with text - "color" and "black & white". I want to replace that with a yes/no field [Color].
But the db has a few thousand entries.
What I would like to do is either change all of the [Color] fields in the new db to yes, and then manually uncheck the ones that are b/w. But I guess it should also be possible to do the whole operation automatically.
Any ideas as to how to accomplish either of these would be appreciated.

Thank you.

View 3 Replies View Related

Toggle Button

Aug 18, 2006

Hi all,
I have a form with two subform on it and two toggle buttons.
Clicking each toggle button will open one of subform, and clicking it again will close that subform. But the problem is that I need to click the toogle button two time to open the sub form.
So, what is the problem??

This is the code under On Click event:
Private Sub Toggle0_Click()
If Me.TendComm_Label.Visible = False Then
Me.TendComm_Label.Visible = True
Me.TendComm.Visible = True
Else
Me.TendComm_Label.Visible = False
Me.TendComm.Visible = False
End If
End Sub

Private Sub Toggle1_Click()
If Me.AuthorizedSignature_Label.Visible = False Then
Me.AuthorizedSignature_Label.Visible = True
Me.AuthorizedSignature.Visible = True
Else
Me.AuthorizedSignature_Label.Visible = False
Me.AuthorizedSignature.Visible = False
End If
End Sub

View 8 Replies View Related

Toggle Button

May 12, 2005

how do these work syntactically? there's no wizard for them.

i want to create a button that displays a picture, then when you click it, it shrinks the form and changes the button picture, and when it is clicked again, the form goes back to the original size and picture. thanks

View 3 Replies View Related

Toggle Button Help

Jun 13, 2007

Hi, I'm very new to programming and i have very little knowledge about it. My problem is probably more simple than I may think, but for some reason I haven't been able to find a solution for it.

In MS Office, I'm making a form with a few toggle buttons which are linked to Yes/No fields on a seperate table. What I would like to do with the buttons is in their default state, which is "No", I want for the word "No" to appear on the top of the button. When the button is pressed, I need for the button to display the word "Yes". I know that it's possible to set the caption on the button to "No". Is there a way to have the caption change to display "Yes" with the press of the same button it's on? If so how? Also to have the fields reset to default with a new page on the form.
Please explain it to me as if I'm a 5 year old trying to learn programming.

Thanks in advance.

View 12 Replies View Related

Toggle MultiSelect Property

Mar 10, 2006

Does any one know of a way to toggle a multiselect listbox's property programmatically?
The One In The VBS Help doesn't work!

View 5 Replies View Related

Toggle Help Box Using Text Label?

Nov 23, 2005

hi again,

i am making a form which has a help link on it;

the help link is basically a label using this code:

Private Sub help_Click()
Me.help_pop.Visible = True
End Sub

this makes the help_pop label appear visible (as it's visibility is false)

ok so i have that bit sorted, now i want to be able to click the help link agian to make the help_pop label disappear..

any help appreciated
Rob

View 9 Replies View Related

Toggle Button Assistance

Dec 8, 2005

Hi, I would like to have a toggle button on my form that when clicked it changes the button colour and the button text. The toggle button doesnt have to be bound.

cheers

View 4 Replies View Related

General :: Toggle On / Off New Record Row

Sep 7, 2014

I have got a DB being used in the office, its a big one so obviously it has quite a large number of tables and forms, alotta the forms are either split forms or have related tables inside them (and in a few cases both)

Everything working fine but people in the office are getting confused, as there are many fields in some of these tables I've set default values to make things easier for everyone, however when people look at the info on the DB they sometimes see a new record, with some fields seemingly filled in (default values) and hence assume its a record that exists which caused confusion

I've attempted to explain that a star on the left hand side indicates a new record which doesnt exist, however this just adds to their confusion..... (seriously makes me wanna facepalm), anyways im thinking it might be simpler if there were a way to toggle on or off the new records row (or hide/unhide it)

of cuorse i know this may cause problems, as if im successful some people will go "hey what happened to the star in it?" or simply ignore the last row outta habit, however i figure ill cross that bridge when i come to it.....

View 4 Replies View Related

Multiple Toggle Buttons Working Together

Jul 23, 2007

Hi - I have another problem. I hope you can help me out on this one.

Right now, I have 3 toggle buttons to control the visibility of 3 subforms. However, I only want a single subform to show at any given time. So, if I were to select toggle 1 it should give me subform 1, and afterwards if I select toggle 2 it should give me subform 2 WITHOUT showing me toggle 1.

Is there anyway to get the toggle buttons to work with each other?

Thanks,
:)

View 14 Replies View Related

Very Simple Yet Cant Get It Working...toggle Box Switch

Mar 19, 2008

Hi

Using a toggle box to ask the following question, i have data that contains either OPEN or CLOSED against each record. I tried using the following in the criteria for the specific data to either select all the OPEN records when the box is clicked and i would like to select all records OPEN and CLOSED when it is nto clicked

IIf([Forms]![MEQN_ProdACStn_Picker]![Toggle38]=True,"OPEN","")

This didn't work and a number of other attempts failed as well...

How do i do it in the criteria selection or is it not possible

Cheers

Newbie Jasper

View 7 Replies View Related

Forms :: Toggle Box That Changes Color Font?

Aug 2, 2013

I created a form that has about 200 fields and all the fields are utilized at a point depending on the work order assigned to us. I wanted to know if it's possible to put like a toggle box or a check box etc. next to the field so if it is checked it would be in a Dark color and the ones not utilized are in a shade of gray. All the fields are coming from the same table. Another thing it's an estimate worksheet so a row would have something like, Labor, QTY, HRs, Overtime, total as columns, so I would want a check box to have control over those but one for each row, EX contractor, locksmith.

View 3 Replies View Related

Forms :: Toggle Button Display?

Aug 12, 2015

Is there a way to show the toggle buttons in an option group as NOT selected when the form first loads up? I've cleared all the default value properties in the table and the form but it always loads as showing one of the buttons pressed/selected. I want the form to load and both buttons in the group look the same.

View 3 Replies View Related

Forms :: Toggle Button With No Background

Nov 16, 2013

I am making a specialty form where it must toggle on or off when the user clicks on a boxed area. Since toggle backgrounds cannot be set to transparent, I need to do it some other way. I thought of either using a button to control a hidden checkbox, or just writing code altogether. The problem is that I don't know what code to use to programmatically change the state each time the box is clicked.

View 14 Replies View Related

How To Create A Datasheet Toggle Button

Feb 3, 2012

I have a contact list db that displays in datasheet view on startup. I also have an alternate form that displays in datasheet mode that i want to be able to toggle to with a click of a button. I would like the button to appear at the top of the default datasheet form, that will allow a user to toggle to the alternate form when they need to.

View 7 Replies View Related

Toggle Button To Control Criteria?

Jul 25, 2013

I have form with a number of of combo boxes that filter a query that populates a list box. It's used to track inventory. I want to add a toggle button that when press will filter my query so that it shows only items with a value > 0 in the quantity field. And when not pressed it won't filter by that field at all.

View 14 Replies View Related

Toggle Button, Focus, Switching Back And Forth

Feb 6, 2006

Here's a little design problem, all of my VB script works fine, it's just a design problem:

Toggle Button (onClick) {
if pressed in, unlock protected field, pass focus to protected field
else (if not pressed in), lock protected field
}

Protected Field (lostFocus){
When Focus is lost, protect field then reset toggle button
}
See, there's no way that I know of for Access to tell what field has focus at any given moment. It lies inert until an event fires off then it responds. You can't wake Access up and tell it to go do something. So, Protected Field has to lock itself when it loses focus.

Here's the problem. If a user unlocks the field but then decides not to make a change and clicks the toggle again to lock the field, first Access fires the script to protect the field (locking it), then it resets the toggle button, then it registers the toggle button click which unlocks the field. See the problem? If the user changes their mind about changing the field and then tries to lock the field, it ends up unlocked. I need something that will work whether the user is good about it or whether the user is in a rush and forgets about it.

View 2 Replies View Related

Toggle Button To Control Field Visibility

Jan 21, 2005

I am one of the guys that the dept. drops 1k to send to the beginner through expert level courses for Access, so I ask patience as I am new to VB coding.

I am working on a database to track patient surgical information. I am using a toggle button to control "patient surgery site" visibility, depending on the number of sites associated with them. They are labeled Site A Site B, Site C

What I want is if a patient only has one site, I press the appropriate toggle (Site_A_Button, Site_C_Button, and Site_C_Button) and only fields pertaining to Site A appear. If they have 2 sites, I can press both of the toggles for A and B, but the C will remain hidden, etc.

Each toggle controls 3 fields -
For the Site A button - Site_A, Diagnosis_A, A_Blocks_Check
For the Site B button - Site_B, Diagnosis_B, B_Blocks_Check
For the Site C button - Site_C, Diagnosis_C, C_Blocks_Check

The *_Blocks_Check also controls visibility for a respective fourth field - Site_A_Blocks , Site_B_Blocks , Site_C_Blocks

So far, I have A and B working just fine. By default, the toggle for A is set to -1 so it is visible by default. Site B and C are default 0. Both A and B work exactly as I want them to, however, site C does NOT. It has identical coding as B, however, it is visible by default (despite the "default 0") and the Site_C_Blocks visibility (controlled by the Check Box) also does not work properly. Here is the VB-

Private Sub A_Blocks_Check_Click()
If A_Blocks_Check = 0 Then
Site_A_Blocks.Visible = False
End If

If A_Blocks_Check = -1 Then
Site_A_Blocks.Visible = True
End If
End Sub

Private Sub B_Blocks_Check_Click()
If B_Blocks_Check = 0 Then
Site_B_Blocks.Visible = False
End If

If B_Blocks_Check = -1 Then
Site_B_Blocks.Visible = True
End If
End Sub

Private Sub C_Blocks_Check_Click()
If C_Blocks_Check = 0 Then
Site_C_Blocks.Visible = False
End If

If C_Blocks_Check = -1 Then
Site_C_Blocks.Visible = True
End If
End Sub

Private Sub Site_A_Button_Click()
If Site_A_Button = -1 Then
Site_A.Visible = True
End If
If Site_A_Button = -1 Then
Diagnosis_A.Visible = True
End If
If Site_A_Button = -1 Then
A_Blocks_Check.Visible = True
End If

If Site_A_Button = 0 Then
Site_A.Visible = False
End If
If Site_A_Button = 0 Then
Diagnosis_A.Visible = False
End If
If Site_A_Button = 0 Then
A_Blocks_Check.Visible = False
End If

End Sub

Private Sub Site_B_Button_Click()
If Site_B_Button = 0 Then
Site_B.Visible = False
End If
If Site_B_Button = 0 Then
Diagnosis_B.Visible = False
End If
If Site_B_Button = 0 Then
B_Blocks_Check.Visible = False
End If

If Site_B_Button = -1 Then
Site_B.Visible = True
End If
If Site_B_Button = -1 Then
Diagnosis_B.Visible = True
End If
If Site_B_Button = -1 Then
B_Blocks_Check.Visible = True
End If
End Sub

Private Sub Site_C_Button_Click()
If Site_C_Button = 0 Then
Site_C.Visible = False
End If
If Site_C_Button = 0 Then
Diagnosis_C.Visible = False
End If
If Site_C_Button = 0 Then
C_Blocks_Check.Visible = False
End If

If Site_C_Button = -1 Then
Site_C.Visible = True
End If
If Site_C_Button = -1 Then
Diagnosis_C.Visible = True
End If
If Site_C_Button = -1 Then
C_Blocks_Check.Visible = True
End If
End Sub

Now I know this is probably sloppy coding, but it was the only way I could get this to work properly at all, so feel free to critique as well.

I want to actually add additional sites (Site D and Site E), but not until I can figure out why the problem is with just A B and C.

I apologize if this seems a bit confusing, but if anyone could help out, I would be most appreciative!

View 1 Replies View Related

Forms :: Toggle On Form To Query Between Two Criteria?

Aug 21, 2013

I am attempting to create a toggle on a form that would instruct a query which criteria to use.

Specifically they are date criteria. I want to be able to toggle between evaluating on a start basis verse a ship basis.

If the toggle is set to 'Start Date', the query would use the start date as its criteria. If the toggle is set to 'Ship Date" it would use the ship date.

The other complication is that within the query, "Start Date" and "Ship Date" are two separate fields always contained in the query, so how do I write the query so that it only applies criteria to the appropriate field based on the toggle setting?

View 6 Replies View Related

Forms :: Toggle Switch On Header Of Form

Apr 14, 2015

I would like to create a command button on the header of a form. The button should perform a toggle switch: click once to activate the task and click it again returning original state. I can create the command button to perform a task but do not know how to return to original state. The button should have indicator showing which state is in.

View 2 Replies View Related

General :: Frames And Toggle Buttons For Criteria

Jun 17, 2014

I have a frame on a form with 2 toggle buttons in it - i want to be able to toggle the buttons to set criteria for a query which i can load as a report from clicking a button - is it possible to do with IFF? or is there an easier way - is it possible to have the report as a sub-report on the form and it to change when i toggle the buttons?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved