I have an old db. I would like to see the forms and tables so I can select them and make changes. I know there is a way to access those items on startup but I have forgotten how. When I bring up the db I see a form and I can get into VB for that form but I cannot see any embedded table, forms reports, etc.
View RepliesI have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
View 3 Replies View RelatedI have had to use my first crosstab queries.
I now understand that when opening and saving crosstab queries Access (2010) runs that query to ascertain the column names. Unless you hard-code them. Running the query takes at least 20 minutes.
I have hard-coded where I can, but one report takes arbitrary dates so I can't hard-code them.
I believe that turning off AutoCorrect might make a difference to whether the query runs - but I don't want to turn it off.
I am making a new Record in the design view of a table (creating a new field in the table), and I am assigning it a date type, is there a hotkey that will select the field properties sheet so that I can select the format of the field without having to move my mouse?
View 1 Replies View RelatedI have a form which was locked down (ie Allow additions, allow edit and allow deletions were all set to no) on the Form property. I want to change this to allow edits so in design mode I changed the Allow Edits property to Yes.
I then went to Form view and was able to update fields on the form. When I exited the form it asked me if I wanted to save the changes so I clicked yes.
On going back into the form I can no longer update the fields I could before. Going into design mode I can see that Allow edits on the form property is set to no again.
What is happening here. There is nothing in the on load or other events to set this to no, besides this shouldn't change the form property should it?
I know I can get around it my setting the property in the form itself but why is the property getting reset in the first place.
Access 2010.
I have an application that when in design master shuts down when I attempt to open a certain form. I have traced the problem to a linked field from another table, by creating a new form and ommitting the said field, problem is its a required field!
If I copy the database (Backup) and run it as a replica it does not happen, if I then convert the replica to design master it happens.
Any suggestions please??
Steve
Is there a way to allow edits to the properties of objects/controls only in Design view and not in the Form View?
View 2 Replies View RelatedWhen I click on the design mode of a query object, generally MS Access defaults to the GUI design view... but in this one application, the design view is pulling up queries in SQL mode first...
If I want to set it to the GUI design mode, I have to either hit design again or run the query then hit design to have it pull up in the regular design mode. Is there a setting or something I am missing? Seems that it only does this when the SQL code is reltively involved (i.e. the simpler queries pull up in the normal design view.
Hi.
Other than manually moving fields in a table in design mode, can I get the fields alphabetized?
Russ
I want to extract the integer part of a string data as a single field.
How to apply self-defined function in Query Design Mode?
any hint is appreciated, thank you in advance~
Hi.
I have put much time in designing a form.
After exiting and saving it, I cannot now open it. Only the Page Header shows, and I cannot get into 'Design' mode. I have tried repairing and compacting to no avail.
Any ideas?
Russ
I am going into the Form Design mode
Click in the subform
I then set tab order by selecting the box and moving the field up.
Looks correct and then I click okay.
The subform does not change.
I go back into design mode, click in subform and select tab order and it looks correct????
I have a form/subform that requires some fields from the Switchboard for its criteria. Last week due to no action on my part, it started asking for those values as Parameters instead (Forms!Data!txtInspDate), etc! The new form loads, but of course it is blank with no data. This happens if I load it from a command button or from the navigation sidebar... UNLESS I first load the switchboard in Design Mode, go to VBA window, then reload the Switchboard in Form Mode and press the button. From then on until I close the database, everything works fine!
View 9 Replies View RelatedI just finished a small Access-2013 database (accdb format).
Now I want to make it available to users.
How do I make an 'executable' (meaning that tables, forms, ... cannot be opened in design mode)?
I just imported all of my objects (tables, forms, etc.) into a brand new database file and all of my forms are now full screen instead of the size I set them to in design. What caused this? I can't get them back to their normal size.
I am using Access 2007 but imported files into 2003 .mdb file.
Form View
Design View
How it should look?
I'm working on a login form and *not thinking* I removed access to the submenu. I had already set the form up so that you either login correctly or exit the program. I'm working in code for the form and I know it's possible to reactivate the menu in code, I just don't know how. And I can't switch to design mode. The form is set up to not allow anything to happen until the correct login has been entered, and I either had a typo when I set up my test login or the program is bugged and only says it's incorrect....
View 1 Replies View RelatedCan I for instance while my db is open, open it in design mode from my form via code?
View 3 Replies View RelatedI'm trying to use Access to create a simple list of the TV-Shows I'm watching, with each episode and a Yes/No field to cross out if I've seen the episode or not. It's taking up unnecessary time to cross of each field individually, but I can't seem to find a way to toggle several in one action, is this possible? It seems likely that it would be.
View 8 Replies View Related" Is it possible to toggle the visibility of a picture on a form's detail section for each row based on a query whether a certain condition is met? "
I have a form, which fetches data from a database and populates the content as a number of rows in the detail section.
For each row I want to test if a certain 'yes/no' condition is met on each query and the toggle the visibility on a picture that I have placed in the detail section.
I've tried seveal possible solutions now, like macros and VBA but haven't got it working.
Btw I'm using Access 2010
Now I have "tbl_organs" with three columns "organNameLatin" and "organNameArabic" as body organs names in latin and its arabic translation,and "bodySystem" which contains body sestems "digestive, respiratory..." in Latin only, and "frm_visit" as a form for recording visit data, I added unbound combo box "cbo_organ" with raw source "tbl_organs", I addedd two command buttons "cmd_En" and "cmd_Ar" to convert the combo box value from english to arabic, I mean cmd_En for showing combo box with two columns "organNameLatin" and "bodySystem",for cmd_Ar will show "bodySystem" and "organNameArabic" , the value of "cbo_organ" then used with another field for populating a txt box, i used this code for onClick event for "cmd_En" :
Me. cbo_Organ = "select distinct bodySystem, organLatinName" & _
"from tbl_organs " & _
" order by bodySystem;"
And for cmd_Ar :
Me. cbo_Organ = "select distinct bodySystem, organArabicName" & _
"from tbl_organs " & _
" order by bodySystem;"
By pressing cmd_En nothing changes and combo box still showing three columns, also the final result is populating bodySystem in final txt box instead of organ name, I dont know if properties of combo box "cbo_organs" like column count and row source have effect on this or not, and if I should determine row source of combo box from the beginning or not ? NB: bodySystem is in one language only which is Latin, the form is unbound, combo and final txt box are unbound.
I have two subforms in a main form. book_sub and book order subform. there are various subforms which i toggle in book order subform window by changing their properties with command button on main form. here is the code -
Code:
private sub billq_click()
Me.BOOK_SUB.SourceObject = "BILLQ"
Me.BOOK_SUB.LinkMasterFields = "[BOOK ORDER SUBFORM].FORM![ORDER ID]"
Me.BOOK_SUB.LinkChildFields = "[order ID]"
private sub stock_click()
Me.BOOK_SUB.SourceObject = "stock"
Me.BOOK_SUB.LinkMasterFields = "[BOOK ORDER SUBFORM].FORM![BOOKCD]"
Me.BOOK_SUB.LinkChildFields = "[BOOKCODE]"
Now the problem is when i change billq to stock it shows parameter entry window with caption [order id] twice. after clicking ok it does toggle the form to stock. then when i click button for billq again it shows the same thing.
the code works fine except showing parameter entry window twice with every toggle.
I have a sub form in DataSheet view and I would like to lock the design so that the User should not change the layout
Even when I set the property of the Datasheet “Allow Design Changes: Design View Only” users are able to unhide the hidden columns and they can also change the size of the column by dragging the column end line
Does any one know how to lock the design of datasheet ( I am using this sub form datasheet for data entry but do not want users to change the layout)
Thanks
Rahul
I'm going to make up names and values -- I'm interested in the structure.
Table ALPHA:
COLA DAT1 DAT2 DAT3
1 5 7 9
2 4 14 8
Table BETA:
COLA_IND DAT1 DAT2 DATN
1 a b c
Table CHARLIE:
COLA_IND DAT1 DAT2
2 d e
Table DELTA:
COLA_IND DAT1 DAT2
2 f g
Ok, the idea here is that the data in table ALPHA contains data with COLA a key such that selecting 2 would yield the data row "4, 14, 8."
Now, COLA_IND is a "COLA" key for table ALPHA (sorry, I can never remember which side is called the foreign key). So, from tables BETA, CHARLIE and DELTA, I can access any row in ALPHA based on the key "COLA_IND"
Here's the fun part. When I build my query, it wants to use an inner join on the keys from all these tables... In order words:
SELECT blah blah blah INNER JOIN blah ON (ALPHA.COLA=BETA.COLA_IND) AND (ALPHA.COLA=CHARLIE.COLA_IND) AND (ALPHA.COLA=DELTA.COLA_IND)
What I'm looking to do is expand BETA, CHARLIE and DELTA with the information from ALPHA based on the key COLA_IND. I don't think this is doing what I want.
Any comments?
Thanks in advance...
Hey,
I've got this problem and im 95% sure its going to need a query in order to achieve this answer im looking for.
I'm creating a Software Licensing Management db and its all working lovely. However my only problem remains is the graphical representation (text box within one of the forms) of howmany licenses are/aren't(doesnt matter if this number is a +/- number) available.
In order to achieve this answer I dont think you'l need the table structure of any of my tables other than these two:
tblLicenseInformation
License_ID
LicenseDescription
NumOfLicensesPurch
SoftwareOverview_ID
tblHardwareSoftwareLicense
HSL_ID
Hardware_ID
Vender_ID
Software_ID
AppEdition_ID
AppVersion_ID
SoftwareOverview_ID
License_ID
However I would like to add a column to either of these tables named 'Availability' or something similar which will show the licenses available.
I've tried a number of Update/Append queries but all have failed. I want this Available running variable held within the table due to it not changing to much of the current db design as i baisically finished the project and they asked for it! any ideas of how to efficiently achieve this will be much appreciated!
cheers
I'm looking for a keyboard shortcut to expand the columns in "design view" of a query.
What I mean by this is rather than selecting all of the columns and double clicking to see the entire text, I'd like to be able to a shortcut.
The entire process as I see it involves 3 steps so I will need thesolution to the 3rd step.
(1) [ctrl+spacebar] to select initial column
(2) [shift+arrows] to select all of the columns I need
(3) [keyboard shortcut] will expand all of the columns "field" names to the size of the column heading
Alternatively, if you know of a shortcut that will expand the columns without having to select them first I'll take it!!
Hello all,
Has anybody ever encountered this before. I can't seem to get rid of it.
When logging in to my Acc 2003 db I get a message along the lines of...
"Access failed to start correctly last time. Starting access in safe mode will help isolate a startup problem. Do you want to open in Safe Mode?"
When selecting No, it allows me in as normal.
This happens everytime I log in now. Even when choosing Yes then exiting the db.
Anybody know where to start looking for the solution?
Thanks
Kempes