Top X Records Using Calculated Field?
Dec 18, 2012I am looking for a way to query to top 10 or 25 records, and can you do this using a calculated field as the basis for the ranking?
View RepliesI am looking for a way to query to top 10 or 25 records, and can you do this using a calculated field as the basis for the ranking?
View RepliesI have a table for storing vehicles. The table contains the following fields:
VehicleID
Make
Model
Trim
Build Date Begin
Build Date End
Vehicle Name - a concatenation of 'Make' 'Model' 'Trim' 'Build Date Begin' and 'Build Date End'
The 'Vehicle ID' is the primary key, the rest of the fields can't be indexed with no duplicates. Is there a way of preventing one from saving a duplicate VehicleName on the table since it is a calculated field.
I have a table (tblStats). The user enters his current weight in a field named Wt. There are 2 other fields in the table named WkLoss and TTDLoss. These two fields are intended to be calculated. What I am trying to do is when the user enters his current weekly weight figure into the Wt field, I want the field WkLoss to get the user's weight from the previous record and place the difference in the field WkLoss. Also I would like to keep a total to date in the TTDLoss field.
So far this has been my attempt.
Code:Public Sub setWeight()Dim rs As DAO.RecordsetDim Startval As DoubleStartval = 190Set rs = CurrentDb.OpenRecordset("tblStats")'Select records to be updatedSet rs = CurrentDb.OpenRecordset _("SELECT * FROM tblStats ") rs.MoveFirst Do rs.Edit'field to update rs.Fields("WkLoss") = Startval rs.Update rs.MoveNext'increment step value Startval = WkLoss - Wt Loop Until rs.EOF rs.Close Set rs = Nothing End Sub
All I get is the value 190 placed in the first record and all zeros in the subsequent records. Also I don't have a clue as to how to get the Total To Date field to calculate.
Any help would be appreciated
Thanks for your time.
I want to take the sum of all records 'cost' i.e.
record 1 - 2
record 2 - 4
record 3 - 3
I want to take the sum and put it in a calculated field and use it to divide it by a predefined value 'no of responses.'
So I make the field in the query -> Calcfield: (Sum([cost])/[responses])
I am pretty new to this and i don't understand why this won't work? Is it something to do with the row Group by (total.)
I have a calculated field in a query. The field name is TotatPt (this is to calculate the total points students have earned during the term). The expression is as follows:
Code:
TotalPt: [Att1Pt]+[Att2Pt]+[Att3Pt]+[Att4Pt]+[Att5Pt]+[Att6Pt]+[Att7Pt]+[Att8Pt]+[Att9Pt]+[Att10Pt]+[Att11Pt]+[Att12Pt]+[Att13Pt]+[Att14Pt]+[Att15Pt]+[Att16Pt]+[Att17Pt]+[Att18Pt]+[Att19Pt]+[Att20Pt]+[Att21Pt]+[Quiz1Pt]+[Quiz2Pt]+[Quiz3Pt]+[Quiz4Pt]+[Quiz5Pt]+[Quiz6Pt]+[Quiz7Pt]+[Quiz8Pt]+[Quiz9Pt]+[Quiz10Pt]+[MidtermWritPt]+[FinalWritPt]+[Proc1Pt]+[Proc2Pt]+[Proc3Pt]+[Proc4Pt]+[Proc5Pt]+[Proc6Pt]+[Proc7Pt]+[Proc8Pt]+[Proc9Pt]+[Proc10Pt]+[Proc11Pt]+[Proc12Pt]+[Proc13Pt]+[Proc14Pt]+[ProcPracPt]
I think this should be no complicated expression (though a bit long) and should just add the fields together. But what I get is that the calculated field appears as expected for records with an odd primary key (1, 3, 5, 7, ...) and turns out blank for records with an even primary key (2, 4, 6, 8, ...)!
I've attached a screenshot.
My query contains two calculated fields [TaxSavings1] and [TaxSavings2], which are based on some currency and number-type fields in one of my underlying tables.
I just created another field in my query which looks like: [TaxSavings1]+[TaxSavings2]. Instead of adding the two fields, it actually lumps the two numbers together. For example, if [TaxSavings1] =135 and [TaxSavings2]=30.25, it will give me: 13530.25. I need it just to simply add, i.e. answer of 165.25.
Does anyone know how to correct this? Thanks in advance.
:confused:
Hi
I have read a number of these threads now where it says you should not generate new records based on calculated fields. So can some one help with my following problem.
I am creating a customer/contract database where when an order is created, a record set is generated to store dates for invoice periods. I have done this by using the start date of the contract and then adding onto this a value of x days that updates a table giving y records based until the end date of the contract.
Is this the best way to do this or can some one tell me a better way.
Thanks
Table1 contain Two fields (3Months) and (6Months)
Table2 contain Two fields (3Months) and (6Months)
the table 2 is the source of a form that will let the user change the numbers. table 1 should change Date1 and Date2 Fields based on the two fields (3months) and (6months) if i want to make a lookup wizard it should be changed manually and if i make a calculated field i can't find other tables in the expression builder
(Phone usage report) I have 3 queries, Query 1 counts number of calls in for a phone extension. Query 2 Counts the number of calls out (dialed calls). The information is keyed on the phone extension. Query 3 runs the first 2 queries (By date via parameter). Each query is keyed on Extension, I only want to see the number of calls in and out for each extension. Problem, when a phone extension being counted has no calls (In or Out), it leaves the phone extension out of the report. I want to see all the phone extensions info regardless of the count (if it = 0). Does anyone know a way around this? Thanks in advance for your help.;)
View 1 Replies View RelatedI have a query with a Date field for EndDate (the dates for end-of-week, Fridays in our case) and another field for Sales (number of sales, not dollars).I want to add 4 calculated fields that represent weeks and have the Sales appear in the correct column (field) for that date.So I will have columns for 10 July 15, 17 July 15, 24 July 15 and 31 July 15 and I want the Sales for each record to land in the correct date column, based on the EndDate column. (The 4 fields is just for the sake of the example, I will actually be having dozens of these calculated date fields).I tried to do it by setting up the 4 calculated fields like:
10Jul15: Sales
and then adding Criteria like:
EndDate = #10/07/2015#
It doesnt work.
I use access 2010.
I am assuming by the error code, one can not use a calculated field to calculate another field.
I am new to Access and this is likely a very elementary question. I recently created a database to track status of projects including progress and funding. The table contains several fields that record various aspects of funding. These fields are added (very simply) and create a calculated field that is a summation of those fields. The table currently contains approx 60 records. The calculated field functions for 2 or 3 records and will not calculate further. I have tried this in a form as well as a query. The form will change the same number, 2 or 3 records. When the query is run the result shows only the 2 or 3 records. What I am doing that is only reading and modifying those records?
View 3 Replies View RelatedSo I have a report with the following text box controls:
[Surname] & ", " & [Firstname]
=Sum([Quarter1_A]) - Named "Quarter_Total"
=Sum([Quarter1_T]) - Named "Quarter_Target"
=Val([Quarter_Total])/Val([Quarter_Target]) - Named "%Target" (Percent Format)
The report is grouped by the expression '[Surname] & ", " & [Firstname]'.I am trying to sort the records by the %Target text box. I tried entering the expression into the sort function but it still sorts by the grouped expression. I also tried sorting by the name of the text box but got the same results. How can I sort by the desired control?
Hi,
I have a calculated field in a query that concatinates an order number prefix and the part number to give the order number:
OrderNum: [OrderPrefix] & [PartNum]
There are 2 tables:
tblPartsList
PartNum
PartDesc
tblPartsListCategories
OrderPrefix
OrderNumCategory
This works fine except for one of the categories. For the third category there are no entries in the tblPartsList - because they are miscellaneous.
How do I change the calculation so that it works as above where there are corresponding Part numbers in tblPartsList and otherwise gives me the order number and any 2 digits e.g. something like [OrderPrefix]*
Having been trying to do this for ages but having trouble with syntax.
hi. i wanted to kno how to have a field in a table that is calculated from other fields if this is possible. for example i have a order table which has a quantity field and a price field and i want to add a total field that will alutomatically calculate the total (quantity*price) and add it to the field. i know how to do this in a query but don know how to get that field from the query into the table. thanks for any help
View 2 Replies View RelatedI am new to Access so please be gentle.
I heve started a new table and one of the fields is Date of Birth.
I want to have another field that looks at the data in DOB and calculate the age, I believe that this can be done with funtion datediff, but the layout doesnt look for other fields, it just looks for a date and the Now statement.
Any ideas on how to make this work? does it have to be a querie?
Mant Thanks
I am new to Access so please be gentle.
I heve started a new table and one of the fields is Date of Birth.
I want to have another field that looks at the data in DOB and calculate the age, I believe that this can be done with funtion datediff, but the layout doesnt look for other fields, it just looks for a date and the Now statement.
Any ideas on how to make this work? does it have to be a querie?
Many Thanks
I am new to Access so please be gentle.
I heve started a new table and one of the fields is Date of Birth.
I want to have another field that looks at the data in DOB and calculate the age, I believe that this can be done with funtion datediff, but the layout doesnt look for other fields, it just looks for a date and the Now statement.
Any ideas on how to make this work? does it have to be a querie?
Many Thanks
I have a table with customers, one with products and one transaction table. How can i produce a report, based on a query that will add up the total any one particular customer has spent to date from the transaction table?
View 1 Replies View Relatedhi. i wanted to kno how to have a field in a table that is calculated from other fields if this is possible. for example i have a order table which has a quantity field and a price field and i want to add a total field that will alutomatically calculate the total (quantity*price) and add it to the field. i know how to do this in a query but don know how to get that field from the query into the table. thanks for any help
View 1 Replies View Relatedi have opened a field (which was created in a table) in a form as a calculated fieled
the calculations are ok but only in the for
the same field in the table remainded empty
how can it be set so the table's field will get the clcaulation ?
** here is a sample file
I have this query which selects two fields and calculates it in another field.
But the calculated field has more than 1 expression.Eg
If field A < Field B,Field B + Field C AS X,If field A < Field C,Field A + Field C AS Y.The problem is that when I show this on the Form I want only 1 of the fields to be shown ie either X or Y .if any of the expressions is satisfied then only that field should be shown as a textbox control on the form and not both.How do I do this?? Its really complicated for me..Pls help..
Hello,
Can someone please help with this expression?
I have a table with text field Cust_ID and a
Number field MCounter.
I would like to put in an expression as source in a form
Text field based on the same table to AGGREGATE
all MCounter values for a Given Cust_ID
Something like
Sum(MCounter) where "Cust_ID"=[Cust_ID]
Is this a correct expression?
Many thanks for any help.
This seems a daft question but I have searched the forums and can't find an answer so I hope someone can help me.
I have a table: Register(RegID, Pupil, Activity, Duration, Preparation)
I have a query that I want to calculate the total hours the pupil has spent on activities.
The Duration and Preparation fileds are held as number of minutes so for a 1 hour event the number 60 is held.
I have a query with 4 fields:
Pupil
SumofDuration
SumofPreparation
TotalHours = ([SumofDuration]+[SumofPreparation])60
The problem I have is that TotalHours is calculating as an whole number.
e.g. I have a Record
Pupil = 701
SumofDuration = 270
SumofPreparation = 0
TotalHours = 4
But I want TotalHours = 4.5
I have set the Duration and Preparation field sizes to Decimal and Format to General Number.
I don't know what else to try.
Can anyone tell me why this won't work? It calculates the 2nd argument (reduction_man) but not the first (reduction)
I have tried both of these and still can't get it to work.
=IIf([reduction])>0,([reduction]*[2004volume])/(13-[cutinmonthnmbr]),([reduction_man]*[2004volume])/(13-[cutinmonthnmbr]))
=IIf(IsNull([reduction])=False,([reduction]*[2004volume])/(13-[cutinmonthnmbr]),([reduction_man]*[2004volume])/(13-[cutinmonthnmbr]))
Thanks!
Hello Guys,
I am trying to do the following in a form.
1) (Travel hours + work hours) * dollarperhr to get the "Total" bill to a customer.
2) The results will be put in a field "TotalDollars" that is a part of a table.
Please help.
I tried to put an event (on change) on the "dollarperhr" box so that after entering the values in "travel hours" + "Work hours" * "dollarperhr", the calculation will be done to populate "TotalDollars", but it didn't work.
please help