Good Afternoon All,
I have a table devoted to time spent on certain projects. I am trying to make a query to show the total time spent on each project (the data is not in time format) and then turn that into a percent for a report. I have tried doing a summary query, but that isn't giving me the data i am looking for...is there an easier way:confused:
I have a query that creates counts of fields based on the data in other fields, basically it tells me that in a table there are two entries with value ABC????? and three of DEF????? , the query works perfectly.
When I create a form to display this data and base the form on the Query I keep getting a message box asking for the ID (key field) from the base table.
If I type * in the box (to denote all values) and press enter I get the results expected.
I am using calculated field as a data type in access 2010.
They are working fine.
However, I added a new field and now the final calc won't work.
I have Subtotal adding loads of fields together. Works fine.
Then I have a VATunit field which is a double integer, so enter 20 and my next field is VATTotal calculates the SubTotal + the VATunit by doing (Subtotal/100)*VATunit. This calculation is fine and gives me the correct amount.
The next field is a Total field. Which adds Subtotal and the VATTotal together. Howver, the Total is the same as Subtotal. It is not adding the VATTotal to it?
I have a product table that includes the name of the product, the quantity ordered, and the unit price. This is a summary table for the whole year showing all of the orders. The Primary Key is [ID] from the [tblOrders] table. I attached a screen shot of my query. I don't know if you can see it. I want to generate a report where each product is listed once, the unit price for that product is listed, the total number of that item that was ordered throughout the year, and finally, the total amount spent for each item during the year.
View 2 Replies View RelatedHi, i could do with a bit of help with the following: I have attached the database so that you can see what I am doing. In my main table I have a couple of fields which rely on being able to compute the values of another table linked by quoteID but am coming up against mental brick wall. any assistance gratefully received.:eek:
View 1 Replies View RelatedI want a Text Box Query on my form to display the Status, Workshop, Time, Enrolled and Limit. The problem is these values come from two different tables and the Enrolled value comes from a single field that contains the different workshops.
What I mean is: In Table[Attendees] a row contains a customer's Number, First Name, Last Name, Workshop and Phone Number. The workshops vary for each customer so one row on the table could have John Doe attending Cover Letter Writing and the next row could have John Smith attending Resume Writing. What I want is to be able to count the different workshops within the Field[Workshop] and total them and then display the total in a Text Box Query. I have a Text Box Query set up displaying Status, Workshop, Time and Limit as these values all come from Table[Workshops].
So basically I need to Query to also display a result that is the Total for each workshop from Table[Attendees] and display the total for each workshop in a Query with data from Table[Workshops].
Here is a link to an Example Database [URL] ....
I'm trying to avoid putting things on different reports and the like because the people using this are basically computer illiterate and if they have to click a button (no matter how well labeled) they won't do it and the information might as well not exist.
And if there's a better way to do it, I'm all ears. The only thing is, I have to update these workshops month by month. Since they are dynamic, I want to avoid creating separate tables for each workshop.
I have a table with products and their costs per unit of measure.
some products are costed by weight and others by piece.
table looks something like this:
product
pcs
weight
unit of measure (EA or KGS)
cost
Query should look like this:
product
pcs
weight
Total Cost
Is it possible to write an expression that, depending on the unit of measure uses the pcs or weight field to calculate the total cost ??????
I've tried many things (compact and repair, Nz(,0), sum()) and I can't get it to work.
I entered =[field1]+[field2] but it behaves like if I had entered =[Field1] & [Field2].
Yes instead of adding the numbers it just puts them together.
For example: Field1=3 and Field2=5 instead of field3=8 it shows Field3=35.
Hello, I have 4 input field boxes in a form: "basic hours", "overtime hours", "holiday hours" and "total hours" i would like it so that when the user enters number(s) into the other field(s) the total field will calculate (add togther the other fields). So for example if the user puts "10" in the "basic hours" input field and "5" in the overtime hours" field then the "toal field" will display the number "15". i would like it so that the "total hours" field calculates the total progressively after each number in the other fields is input (ie a running total is displayed). The user will always fill in basic hours but 1 or more of the other fields can be left blank. I think i need to do some VB on the after update procedure for each field entry but not sure what the code is?, any help would be brilliant.
View 7 Replies View RelatedI have a database for police officers to enter their daily activity. For example on arrests, Date:_____ Drugs____DUI___
The officers enter the date and the total number arrested for each charge. I want to print a monthly report. How do I make the report print this information for a specific date range? The way I have it now, it asks for the startdate and enddate, but it still totals every record, not just the date range.
i would like to sum up 5 fields and save (or just show it in the form view is enough really) in a seperate field, i have managed to sum the 5 fields, but it summed up all 5 fields in all records, i'd like to have my form show the sum for the record, not the table.
it would be ideal that it would refresh when one of the 5 fields data changes, i.e from 1000 to 2000. again updating in the form view is what is needed.
I have created a table with four fields. The names are:1stBusOn, 1stBusOff, 2ndBusOn, 2ndBusOff.
I want the time for the first two fields and the time for the second two fields to end up in a field called TotalRideTime.
Also, if only one set of the fields are completed I still want that total time to in up in the the TotalRideTime field.
I need a solution for the following problem:
For example:
............F1 F2 F3
Rec1 ....4 ..2 ..5
Rec2 ....3 ..3 ..1
Rec3 ....1 ..2 ..1
Now, I want to know how many 1s are there in Rec3 the answer is obviously 2 but I want a field(F4, for e.g) that calculates F1+F2+F3 showing all their 1s 2s and 3s.
A solution I found was...... F4=IIf([F1],1,0)+IIf([F2],1,0)+IIf([F3],1,0)
But I have over 50 Fields that contain 1s and 2s and I can't count them all by using this formula as it will be tremendously long and access will reject it.
So I need another formula(or function) that will look up for the 1s across multiple fields and show the total count for each record in a new field.
Tried 'look up' function but achieved nothing ....
I have to create a query in access that will calculate two Date and time fields [Date & Time Left]/ [Date Returned], need to figure out between the two fields. Trying to identify when the rep returned the call and the number of business hours (6:00am - 4:30pm) it takes to return a message in Ms Access 2010.
The only issue is the calculation has to be done by time and so I have to calculate what time they left the message(so the difference between [Date & Time Left] and [Date Returned) [Date & Time Left] and when the rep returned the message which is suppose to be [Date Returned] but the problem with this field is the data entry is in date format (10/9/2014, 00/00/0000) of Date and not Date and Time like the [Date & Time Left] field, so I don't know what to do now. Not sure what to do now not a database that create or have allot of control over.
Any way of setting up a table containing the following date/time fields.
StartDate
StartTime
EndDate
EndTime
Ultimately I will need to be able to subtract these date/times to get a total time between the two. Should I combine the start date and times in one cell or keep them separate.
In either scenerio, how do I subtract the two in a query for a report?
I have two fields on the main form and I need a total count of records between the value of the two and then enter the total in a bound field on the main form
View 1 Replies View RelatedSay I have a table with ID's of people and a column with the hours they need to work on a specific day. I want to make a query where I get the total working hours for every person in that table for a certain date. The problem is that when a specific person in the table has no hours for a certain day he doesn't show up in the query if I choose that day.., is there a way to make sure that I get everybody's names for every day even if they don't have any hours on that day, but instead of not showing it would show a "0" instead?
View 1 Replies View RelatedI know a fair bit about access 2010. I have the following table
------------------------------------------------------------------------------
- product no ----- Branch ID --- POS Description --last sold date --
------------------------------------------------------------------------------
- 123 ------- 1 ----- fly rod ---- 19/01/2014 ----
- 123 ------- 2 ----- fly rod ---- 19/03/2014 ----
- 123 ------- 3 ----- fly rod ---- 19/05/2014 ----
- 123 ------- 4 ----- fly rod ---- 19/06/2014 ----
- 123 ------- 5 ----- fly rod ---- 19/09/2014 ----
- 633 ------- 1 ----- fly reel ---- 11/01/2014 ----
- 633 ------- 2 ----- fly reel ---- 11/03/2014 ----
- 633 ------- 3 ----- fly reel ---- 11/05/2014 ----
- 633 ------- 4 ----- fly reel ---- 11/06/2014 ----
- 633 ------- 5 ----- fly reel ---- 11/09/2014 ----
------------------------------------------------------------------------------
I need it to give me back, one row per product (product no) - the newest date (Date Last Sold)
So i am trying to find out the last time each product sold, regardless of where
Which i can do with MAX date, group by product num
SELECT SMKPLUDetail.[Product No], Last(SMKPLUDetail.[Branch ID]) AS [LastOfBranch ID], Last(SMKPLUDetail.[POS Description]) AS [LastOfPOS Description], Max(SMKPLUDetail.[Date Last Sold]) AS [MaxOfDate Last Sold]
FROM SMKPLUDetail
GROUP BY SMKPLUDetail.[Product No];
------------------------------------------------------------------------------
- product no ----- Branch ID --- POS Description --last sold date --
------------------------------------------------------------------------------
- 123 ------- 5 ----- fly rod ---- 19/09/2014 ----
- 633 ------- 5 ----- fly reel ---- 11/09/2014 ----
------------------------------------------------------------------------------
This is great, but ofcourse (last of is fine for description) as is does not change
But last of, always returns branch 11.. and i infact want the branch which is correct, the branch which the date last sold is from, the current record really
but i do not seem to be able to get it to show me, any other fields from the querry current row.
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
Hi,
1) I am pretty newbie to this access programming, do forgive me if my questions sounds stupid.
2) Basically I create an application in access capturing or production information for my company. now the top management suddenly wanted whats their main concern:- Total Daily/Monthly, Quarterly, Annual Sales (By Model If possible)
3) I start with daily (Lets don't be too overly ambitious).
4) I try to let user select dates from my calender control and reflect daily sales (in Total & By Model break down) insert into my form.
5) Understand someone told me from my previous post in Calender control I can achieve it either through forms or queries, which is a better way. (in terms of flexibility to change for program maintenance/ scalibility) wise ?
PS: Please forgive my ignorance :o:(
Thanks (In advance) & God Bless.
I am a newbie, so please forgive me for such an easy question, but I am stumped. I attached a text file that shows the data I am working with. What I need to do is take each product (labeled Prod) and do a weekly sum on the quantities and compare against a set number to see if the quantity is lower or higher. For instance, I need to take column 12, regardless of value and compare it against set number. If the quantity is less, then I need to add the value of column 12 to column 13 and compare the summed value against set number. Again, if the sum is less than set number, I then need to take the value of column 14 and add it to the summed value of the previous step (sum of 12 & 13), then compare this new sum to set number. This process keeps taking place until I reach a summed value that is greater than set number. Once that happens I need to identify the column that sent me over the set value and hold that data. For instance, if column 33's (out of 52) summed value takes me over the set number, I want to know that it was column 33, so I can run further calculations against that value. The column header's are week numbers and I need to identify order points based on lead times and when I will run out of material. Is this beyond queries? I think so, but if it is, I don't know how to exactly begin the code in VBA either. I think I would use an If then Else stucture with a counter switch set from 1 to 52, unless comparison exits function, but not certain. HELP?????:confused:
View 3 Replies View RelatedI need to be able to restrict users enter a value in the text box (on Form B) called "FTE Assigned" if Dsum of a field called "FTE Allocated" in another form A is less than what is going to be sum of FTE Assigned after the value is entered.
Both these forms are used by users to enter data in the 2 separate tables which are linked together through a join.
Master table - having FTE Allocated values and secondary table having FTE Assigned values.
Basically a message box would do if Dsum (of FTE used) is coming out higher than FTE allocated.
I'm trying to sum up the hours of a sub-form on the main form. I've followed the instructions in Access Help so far. I've created a text box in the footer of the sub form with the following control source:
=Sum([Mon])
which should sum up all the hours in HoursMon fileds.
Then I've created a text box on the main form with the following code in the Control Source
=[frmTshtProj Subform]!SumMon
But it doesn't work. I get a #Name? appear in the box instead of a total. Any ideas?
Thanks in advance
S
I created a form in Access that retrieves data from a table. Inside the form, I am able to access/populate data fields with data from the table. I also have data fields, inside the form, that requires key-in data. I have some how lost the ability send all data field information to a second table and clear existing data fields for new entry.
Questions: What settings, code or buttons can I use to send/store data field information to a new table? What settings, code or buttons can I use to automatically clear all data fields from my form once data has been sent to the new table?
Basically in my order details table i have the following fields
Product
Unit
Size
At the moment i have the Product field with a dropdown that gives me all the products from my ProductT. But once i choose the correct product in the unit field it gives me all the possibilities of every product not just the units associated with that product. ie
ProductT
Grasshopper Box1000 Adult
Grasshopper Box1000 Subadult
Worm 10pz Big
When I select the grasshopper product and move on to the unit field i also get "10pz" option but this is not a product available.
How do i set up validation of the fields Unit and size based on another fields data?
I have a database that will register the emails coming in and what time, also the time, date out and person.
I have a form with the fields to be filled in and a submit button. There are some fields that are automatically filled in and others need manually fill in.
below that part is a sheet (subform in the form of sheet) that should be filled in with the above data. Once it is there, it should empty the fields so they are ready to be filled in again. If I fill new data and press the submit button, it should go to the next available row.