I have a Report that has calculated fields in the details section. I want to total those fields in the Report Footer. When I run the report I am prompted to enter the value for the calculated fields and the Totals do not appear. Access must be inspecting the report before it actually runs. And so, since the calculated fields do not exist until the report is run then Access doesnt find them during the inspection and hence prompts for input.
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title Department Header Supervisor Header Group Header Detail Department Footer: Totals Report Footer: Overall Totals for all departments
Here's my question. I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
I have some reports which lay my data out perfectly.For example,Report headerPage headerDetailsPage footerReport footerNow, I'd like to have exactly the same layout on some forms but with various buttons, etc. for manipulating data.The only problem is that when I put something on the form footer, it appears at the bottom of the viewable screen area no matter whether the detail area should overrun or not ?Is this due to form size or something else?Ideally I'd like to have it appear right at the bottom of the form and allow the user to scroll down the form to see the footer.
I have a form with three fields named 'quantity' (numberfield), 'service' (combo box) and 'amount' (calculated field with controlsource =[service].[Column](2)*[quantity].
I try to sum the amount field in the formfooter with =Sum([service].[Column](2)*[quantity]) but I receive an error.
Somehow it does not get the value for [service].[Column](2)
I've got a subform (simple table view) inside a main form, the subform (sfrmRecipes) just has an IngID field (which stores ingredient ID's) and a percentage field
I've added a few calculated fields to this subform, to assist users in making decisions, however each of these fields needs a sum total
So far my percentage field (which is an actual stored field in tblRecipes) is the only one with a functioning sum for some reason the two calculated fields (which are both plain numbers, no text) do not give me a sum total option, i am only able to use the count function on them
Why calculated fields dont sum up and if there is an easy way to get it working (tried creating my own text field in the footer and manually typing SUM(fieldname), but it does not work).
This Works:I have a report with subreports that provide totals to the main report. The main report is grouped to provide the totals by customer. Here is the format:
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are: VehicleReading PreviousReading VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers, = [VehicleReading]-[PreviousReading]
And also a calculated field named Consumption, =[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail. I have tried copying the syntax suggested by the Expression builder:
I have a form that is displayed continuously and there is a text field in it (Text12).In the footer of this form I would like to add a textbox that is the sum of all Text12's on the form.I tried =Sum([Text12]) in the textboxes control source but that is just displaying an error when I run the form.
I have a report with a number of calculated fields, and information that is pulled from the form that calls the report. Pulling the information is done in the Report_Load() event by setting the report.txtBox = Form.txtBox. When I open the report in acPreview all the calculated fields are populated as they should, and when I open the report in acNormal mode (which is what I want) the calculated fields remain blank.
I have calculated fields on my tables and used zero values as default to show totals. But when I view my report, all the zeros appear. Don't want those zeros to appear on the report.
I want to sum the total of all the purchase prices together so I know the total value on order. I keep getting an error: "You tried to execute a query that does not include the specified expression Purchase Order' as part of an aggregate function
I have a problem with a total on my main form (calculated from a subform) not updating immediately. The updated total only displays correctly after I’ve navigated to another record and then back again. I would like the totals to update immediately after I’ve entered the new data. Can anyone help? Here are the specifics…
My main form has a subform which displays a dynaset of records from a query. I’ve set up this subform so that I can enter a new record, which is then written back to the record source for the query. This is accomplished via a combo box from which the user selects a product, and an AfterUpdate event returns the price of that product to the TotalPrice control on the subform. In the footer of this subform is a calculated control (called AdExpenseSubTotal), which calculates the sum of the TotalPrice field from the query. The footer of this form is hidden, and I’ve set up a control on the main (TotalSpent) form which displays the value of the subform control AdExpenseSubTotal. This total seems to update immediately whenever I tab off the relevant field in the subform – so far so good, no problems here.
Now here’s where it gets tricky. My main form has another subform which is hidden. This subform returns a dynaset of records from another query which has the same record source as the query on the first subform. Like the first subform, this subform also has a hidden calculated control with an aggregate function (Sum), and a calculated control (VendorSpent) on the main form to display its value.
As I said before, when a enter a new record in the first (displayed) subform (via the combo box) and tab off it, the TotalSpent control on the main form updates immediately, but the VendorSpent control doesn’t. Obviously the new record I’ve added doesn’t immediately show up in the query dynaset of the second (hidden) subform from which the VendorSpent control on the main form gets its value. The VendorSpent control only displays the updated total when I navigate to the next record, and then navigate back again.
Is there some Event Procedure I need to add to the AfterUpdate property of the combo box on the first subform which immediately forces the second (hidden) subform to requery? I probably haven’t explained myself very clearly, but I can provide a copy of the file (it’s only 184 Kb) if that helps.
We recently have had a change to our hourly rate that we pay and now the Totals calculation is not adding up the numbers correctly.
In the query that the report is based from:
ExtendedTotal: CCur([Hours]*[Rate])
In the footer of the report: (Provides a Total for each Day)
Sub-Total: "Control Source" is: =Sum(CCur([ExtendedTotal]))
Report Footer: (Provides a Grand Total for the Month) Total: "Control Source" is: =Sum([ExtendedTotal])
Problem comes in with the odd dollar rate time partial hours. For example:
$9.73 x 4.5 hours = $43.785 (Rounds to $43.79) which is fine...
but when you have a whole column of these rounded numbers, the totals are coming out off by pennies which add up to a good bit at the end of the month. I cannot match up the totals with the invoices that are coming in either.
I have a report that prints the report header and footer on seperate pages. The only problem is that the page footer and page header show on the pages with the report. Since the report header and footer show on seperate pages I don't need the page footer to show on these pages. How do you suppress the page header and footer on the pages with the report header and footer? Thanks
I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
I'm using this date format in my report footer. =Format(Date(),"Long Date") & " " & Format(Time(),"Medium Time"). It gives the current date and time on my computer, but causes an error on the other computers in the office. Any ideas why?
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then Me.PageFooter2.Visible = False Else Me.PageFooter2.Visible = True End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
I current have three different reports that are the same except for the footers. That means that each time I have a change to the report, I have to remember to make the change on all three copies. Is there a way to add (1) some custom text such as "Client Copy", "Please Sign and Return", "Our Copy" plus one or two data fields from the report query in the page footer (the data fields would be different for each copy)?Basically, what I would like to do is have just one report, but print three copies of it, with each of the three copies having different footers as described above. Is this possible?
I have a form with attached subform from which I can choose which records to send to a report. All records in the base table have a comment text field for the user to enter additional data (comments). Typically, there are none, but when there is, if it is only a single record sent to the report, the comment is printed in the page footer. However, if there are multiple records being sent to the report and only one record has text in the comment field, unless it's the last record it the subform, it will not print in the report. There isn't enough room in the detail section to include the comment field (like I said, it's typically not used and when it is, they can be lengthy). Is there a way to get the comment field to print in the report page footer when it is not either the only record selected, or the last record?
I've got a problem in my access 2007 database. In my office, I have to print invoice reports on pre-ready papers. So the place of every printed object should be fixed. my problem is that whenever the list of sales icons increases or decreases in Detail section of report, the location of total part in report footer goes up or down. I want this location to be immobile and not changed !
I am in need of assistance with Microsoft Access. In the reporting function of Access I am trying to have a summarization total of indirect time and direct time based off a Auditor Timesheet form developed. On the report I am able to see both the direct time and the indirect time hours seperate per auditor based on the query that is run to seperate direct and indirect hours and each individual auditor stats.
but the problem I am having is trying to summarize on the report the total direct and indirect hours as a whole.
Please let me know if this a simple solution by building an expression in the field for the report or some type of VBA code input which would suffice?
