Hello,
I would like to insert a DCount function in an unbound textbox in a form to count all records in a query. My current code in the textbox is: '=DCount("*","Query1")'. The Query 'Query1' depends on two parameters, which has to be entered before opening the query. The result is '#Error', if 'Query1' is open or not.
Thanks for your help.
Hello,
I am using a Dcount function in an unbound textbox to count the number of records in a query.
I have noticed that it takes some time to process the calculation. Often I need to click in the text box to see the result.
Is there any other way I can do this, perhaps via code? This is what I am writing:
=DCount("[BLN]","SAAdata")
BLN is the field
SAADATA is the query name
Thanks.
HELP PLEASE!!! There are two fields in my form that need the following relationship:
1. When I enter 1000 in my "spec no" field in my form, I need my "Number Field" to enter a "1"
2. When I enter 1000 in my "spec no" field in the next record, I need the "Number Field" for this record to enter "2" but "1" to remain on the first record.
3. If I enter 1001 in my "spec no" field in the next record, I need the "Number Field" to enter "1"
4. Continue this logic for all records without modifying the previous "Number Field" record.
I was told there was a way to accomplish this using DCount or Count function. Maybe there's an easier way??? Any help is greatly appreciated!! TX!
I have a report where I use numerous DCOUNT functions, and it works fine. But now I need another report which has multiple conditions, and I can't seem to find examples anywhere to get my syntax right. For this example, the field 1 ENJOY in table CONGSITEALL needs to pull out the number of entries for the answer Yes, Definitely, and Most of the Time. I have tried putting the quotes, etc into diffeent places but I just can't seem to find the right combination.
=DCount("[1 ENJOY]","CONGSITEALL","[1 ENJOY] IN ('''Yes, Definitely','Most Of The Time'")
In my database when an item is currently being loaned the item's loaned field will have a 1 to indicate this. When the item is returned the value is 0. Only so many items are available and when I use the DCount function it is counting the 0s as 1s.
View 1 Replies View RelatedMy mainform is "CourseDays" and subform is "CoursesSubForm". The "CoursesSubForm" data source is a table "Courses" which contains a field "Subject".
I add a calculated field on the mainform to count the number of records in the subform. This is my code:
=DCount(”[Subject]”,”[CoursesSubForm]”)
An error message results.
DCount function.
Code:
Me.ImprovementNotice5DayCount = DCount("[txtReferralReason]", "qryRTOFileReferralPopupCount", "[ComplianceTargetDate]-[DateNow]<=5")
I am not sure where I have gone wrong.
What I would like Dcount to count are those dates in the ComplianceTargetDate form control that are <=5 to the DateNow form control.
I get a count of 3 when there is only one. I may have the syntax of the Dcount wrong.
I am working with MS Access 2003. I have a form (frmCalendar) with a textbox (tbDay) and a combobox (cmbLineName)
I want to count the number of records based on the criteria from cmbLineName, and show the result in tbDate. Inside the Control Source of tbDate I put in the following:
=DCount("[EncounterID]","tblEncounters","[LineName] = ' " & "Forms![frmCalendar]![cmbLineName] = " ' ")
The problem is that the result in tbDate is always 0; regardless of what is chosen in cmbLineName. I know that the record count should not be 0 for all criteria.
I ahve declared custCount as an integer and id as a string that comes from the user form (id = me.CustID) and trying to count the number of matching records in the recordset (rst) using the following:
custCount = DCount("[customerId]", rst, "[customerId] like '" & id & "'")
I'm getting a type mismatch error on the DCount statement?
I am trying to count the number of records in a subform where the text box (txtFinal) = RPR-RPR & RTN. The subform is called PartNumbers. The table name the subform is bound to is named Completed.
I tried using =DCount("[Part Number]","Completed","[Final] = 'RPR-RPR & RTN'"). That is counting the total number of records in the table, not the total number of records in the subform. How do I get it to count the total number of records in the subform?
I am using the dcount function as the example I display below. The problem is that it returns the correct result (i.e. 59) but the data type is text (59 is on the left side) . I need this to be number.
=DCount("[OrderID]", "Orders", "[ShipRegion] = 'CA'")
I've got a lady in San Francisco who has a MicroSoft Access database. She wrote some basic code to pull data from a SQL Server database into her Access database and then generate a bunch of reports.... She uses ODBC to communicate to the SQL Server database. All was working fine until this week and suddenly now when she runs the reporting job she gets a pop-up for each individual report asking her to log in fresh each time...
Has anyone experienced a similar problem or might have any idea how to fix this? Thanks in advance!
I have a form that we've been using for a while now. I want to add a multi-select box to find records on the form.
While this works great on other forms in our database, when I use the wizard on this particular form it doens't give me the "find a record on my form based on my selection option" but gives me...
"Look up values in a table or query"
and
"I will type in the values that I want"
instead. Why is the wizard not giving me the other option?
Also, my auto correct feature isn't working to stop all caps on data entry on one of my forms? How do I troubleshoot that?
Thanks,
Dianne
I 'm having trouble with a DB. One of the forms is a schuduler which the user clicks on a calendar control and a form opens up showing orders schuduled for that date and unschudule order. The user then can assign the order. Just recently whichout any DB changes the user gets kicked out of the db when they scroll down thru the records. This is happening on Multiple workstations and rebooting doesn't help. Tried deleting the record but its not a problem with a specific record scrolling thru other records with the same fields filled in works. The Detect and Repair did not work (believe it or not) The same happens on the query that the form get it data from and I tried to copy the table to make a backup but it kicks me out. I'm thinking the tbl might have to many fields (55) but the DB is only 39 MB.
View 1 Replies View RelatedI am using Access 2000
I have set some fields in a table to required
However it still allows the cell to be blank
But if I type a space into the cell, then the rule kicks in
Any help please
Hello,
I would like to use the FindRecord Method, but something does not work. I would like to find a record which contains the data I entered in an unbound textbox in the form. The action should be started by a command button. As 'Find what'-object I used '=[text61].[text].
Thanks for your help.
I created a database which had to be split to allow multiple people to access it with three 'front-ends' so that different people had different levels of access. Due to security problems this database had to be moved to another location on the network. Now I have used the linked table manager to update all of the frontends so they can locate the data. Previously users would just copy their own version, appropriate to them, and use this to update; now though only one person can open the database at a time with the backend database being opened and hence locked (if that makes sense).
Any suggestions as to why this has happened, or solutions would be appreciated.
mjc65
--------------------------------------------------------------------------------
I maintain the Access databases at the hospital that I work at. Last weekend, our server went down. Computer Services got a new server and reworked the networking permissions. However, Access will no longer allow more than one user to open the database at a time. This is a problem because we always have multiple users that need simultaneous access. The default is still "Open Shared" and I checked to ensure that the databases are not being opened exclusively. However, the message that I do get when a second user tries to open the database is:
The table 'MSysAccessObjects' is already opened exclusively by another user, or it is already open through the user interface and cannot be manipulated programmatically. (Error 3008) -
I understand that this message usually comes up when I try to open a table that is already being edited elsewhere. I have the record locks set to "edited record". However, this is a system file, so I am hesitant to make changes in it unless I know exactly what I am doing. This is a problem that we have never had before but for some reason was created after our server went down. I don't know why something changed or if this table is absolutely necessary. I am unsure where to start to solve the problem.
So basically I need making a function that will count the number of records from another table/query based on a field from the current query.
View 2 Replies View RelatedI have a project at hand and it's been a predecessor of mine and client has asked me to do some work on it and extend functionality - but I have not really delved into Access before and I have had to worked my way through to this final snag :/
The Main Form has one sub form. This sub form allows the user to add multiple order items i.e. qty, stock, description from records within the system - fairly straight forward.At the last column of each row is the sub total of those particular items i.e.
Qty Unit | Item ID | Total
-----------------------
2 | 1234 | 80.00
------------------------
1 | 43526 | 20.00
------------------------
> | |
So the total is a function of =[Qty Unit] * [Unit Price].Then in the Footer of this SubForm is the Sub Total
=SUM([Qty Unit] * [Unit Price])
All fine and well..... However, the additional functionality kicks in.
Lets add the additional customer_id from the Main Form. Each Item bought is dependent on the customer_id i.e. they get special prices depending on who they are.So a New table is made which has the Item ID and SpecialPriceID (of a table to define as a specialPrice) and the Price linked to this Item and Special Price category. So say that there are two groups of users "wholesale" and "nonwholesale" these would be SP_1 and SP_2 and each client is defined either one of these, and each stock item has a Price for each SP_1 and SP_2. Hopefully I've explained myself there.
Back to the SubForm. So now the Total needs to calculated differently with needed the external customer_id from the Main Form.
Code:
Function CalculateSpecialPrice(ItemID As String, CustomerID As String, Unit As Integer)
Dim SPSelect As String
SPSelect = "SELECT Price FROM [Items_SpecialPrices] WHERE"
SPSelect = SPSelect & " ItemID = '" & ItemID
SPSelect = SPSelect & "' AND SpecialPriceID = (SELECT SpecialPriceID FROM Customers WHERE customer_id = " & CustomerID & ") "
[code]....
its the sub total I just keep on getting #Error on. I have even watched (using alerts) that the correct return variable is the same as the individual rows. This is the equation I used for the SubTotal within the footer.
=SUM(CalculateSpecialPrice([Item ID], [Form]![FormName]![CustomerID], [Qty Unit]))
#Error
Was wondering if someone could possibly help me with a DCount problem i'm having.
I have a form with a subform, displaying bookings that customer has made. What i want to be able to do, is when a booking is created for a customer in this subform, after the time period chosen is selected, i want a DCount to run, go to a table of regular bookings, count up how many bookings in it have the date of booking, that same as the date just put into the subform, AND the time period of booking the same as just put into the subform. There can only be 1 result at max due to its setup, and from there it should be fine, but i cannot get it to work. The field names are as follow:
Subform:
Date for Booking
Time Period
tblRegularBookings
Date For
Time Period
If this doesn't make any sense i can try and explain better.
Can anyone help me?
Thanks very much in advance
I have only been using access for about 3 weeks now, and its kicking my butt pretty hard.
Im making a query that does all kinds of math junk in it. I want to be able to find the number of occurrences of x in another column in the table.
For a better example, lets say I have a column named "SP" in the "compiled" table, the values of this column range from 1 to 5, in about 200 entries. So there is another column in the compiled table called "SPX", which has the same value range. So if I am looking at the one entry in the table, I want to take its value in the "SPX" column, and see how many times it shows up in the "SP" column.
I have been trying to get dcount to do this, but I cant seem to get it to work... Must have tried a dozen ways now.
Any help would be awesome, thank you.
My main table is called NEWcompiled, I have fields named "faction", "SPeffect", and "Launcher_ID". I am trying to use Dcount in a query to count up how many entries have a value in "faction" and "SPeffect" that are equal, and a value of "yes" in "Launcher_ID".
Currently my code looks like this:
DCount("Faction","NEWcompiled","Faction = '" & [SPEffect] & "'" And "Launcher_ID = yes")
This indeed counts how many entries have equal values for "faction" and "SPeffect", but then it seems to add that to sum of all the entries that have a yes for "Launcher_id".
Any help would be great, thank you for your time.
dear all,
i have the problem when using dcount in my query,anyone can help me?this is the situation.
Table 1:
Num
20080207
20080215
20080218
Table 2:
Begin End
20080206 20080208
20080200 200802116
i want to make the query,and i want to add field "sumactive" using the dcount function refer to Table 1,anyone can help me?i want to count how many record "num" in table 1,between field "begin" and field "end" in table 2
Begin End sumactive
20080206 20080208 1
20080200 20080216 2
thanks
regards
martell
Im trying to count the number of records in a table that contain certain crieria, I think I should be using the DCount function and have looked for help on it, but I dont understand it. im unsure if I should be counting the records on the form or the table.
This is my Criteria, Table Name = Armour_Selection, Field name = ExerciseName, I want it to tell me how many records there are with ExerciseName = ?
Could some help please?
I've looked at numerous threads on this site and still can't get a dcount to work.
I want the database to check if there is a valid reference number entered before opening a form.
There is a table called 'staff' with a 'payroll number' field in it. This table contains all staff.
I then want the user to enter a payroll number and retrieve the corresponding record. However, if there is no match then the user has entered the number incorrectly.
I've done:
int2=dcount("[payroll number]","staff",forms!control,payroll) and then an:
if int2=0 then msgbox
end if
exit sub
However, I either now get a message when the number is correct, or it's exitting the sub every time.
Any corrections please?