Trying To Get A Form TxtBx To Display Function Result
Nov 30, 2004
It's written a Function which takes an Integer as Arg, runs a Select Statement and returns a String.
Such that the Control Source of the Forms reads....
=ConvertCompanyNumbers([12]) = where [12] is the Name of the field. Not My choice to have numbers as Fields.. but there it is.
Anyway.. I'm getting an #Name? error... also tried [Ctl12] but again same error.
I know the function works, as I can use something like =ConvertCompanyNumbers(12) and it displays the appropriate result.
What is up with this?
View Replies
ADVERTISEMENT
May 1, 2008
I would like to allow users create a query and then display the result in a new table. Just like the regular way in Access.
I know how to do it using DAO. However, I am working on a ADP, and want to use ADO for this. I cannot find a solution in ADO. So frustrated!
Any help is appreciated!
View 5 Replies
View Related
Nov 18, 2014
I'm trying to use the job number field, which is my primary key in my table, to auto assign the new job number on my Forms. Currently, I have to enter a new job number manually, and it has to be unique because that is the way I have it set. I can't use autonumber because Access does not allow you to select what number you would like to start from, which would not play well with my current job numbers.
Basically I need Access to get the job number from the last record and add 1 to it, or just find the last / highest current job number and add 1 to it.
I created a query (qryFindJob#s) that list all of the Job Numbers, but I'm not sure how to add the query results to my Form to display the Job number + 1. I created a text box, typed a simple expression in the control box to see if I was on the right path (=[qryFindJob#s]) but I keep getting a #Name? error in the txt field.
View 7 Replies
View Related
Jun 15, 2013
Is there an easy way of entering a value in a text box, passing to a query to do a count function and then return the value of count function in to anther text box?
View 5 Replies
View Related
Jul 20, 2005
Here's the form I'm trying to Create:
VEH POS NAME
A21: TC: CPT Somebody
G: SGT Someoneelse
D: PVT Noone
A22: TC: SFC Smith
G: SGT Jones
D: PVT Doe
and so on and so forth.
The VEH and POS are just going to be Labels in a form....no prob. Each Soldier's Squad and Team (for mounted Vehicle and Position) are stored in the Personnel Table. The below query is for vehicle A7 (ACTUAL would be the same as TC above). The query works. I just need to know how to get the result to display in a text box. What I'm planning on doing is creating text boxes for each posistion with these small select queries, so when I update the SQD and Team in the Personnel Table it updates on this form. Or is there an easier way to do this?
Dim strSQL as string
strSQL="SELECT [tblPERSONNEL]![RANK] & " " & [tblPERSONNEL]![LAST_NAME] AS NAME
FROM tblPERSONNEL
WHERE (((tblPERSONNEL.SQD)="A7") AND ((tblPERSONNEL.TEAM)="ACTUAL"))"
View 3 Replies
View Related
Jul 3, 2014
I have the need to display the return of my "Sum Query" to display in a text box.
I need the attached below value (40500) in the "SumofQuery" attachment, which updates every 5 minutes to display on the "StatusBoard" attachment text box.
I have been searching for a good 10 hours on how to do this and still cannot find it.
View 14 Replies
View Related
May 13, 2005
First, I am a beginner with Access. I am a graphics designer that has been assigned to cover for a db programmer that quit!
Here is my problem:
I have a database that we use to hold customer information. There are 22 fields in each record, and we are now well over 3000 records.
Once upon a time, to find a specific customer, we would just go to the bottom of the page, and use the arrow buttons to scroll through them all. This is no longer possible as the size is too big to manually search.
What I would like to do:
Upon Access startup, display a form that has a single input field and a button titled "Search". The input field is titled [UserName], as this field is the unique key identifier for the record. When the user types in the UserName and clicks the SEARCH command button, another form appears to display JUST THAT RECORD in the easy to read form!
If this is really basic, I appologize. I have 20 years experience with commercial illustration and only 7 days experience with Access. I have purchased books, and hit the forums, but I am not a VB programmer, and my skills this area are REAL weak!
My resourse books include the following:
Wiley - Access 2003 Bible [Prague, Irwin & Reardon]
Osbourne - How to do Everything with Access 2002 [Anderson]
O'Reilly - Access Cookbook [Getz, Litwin & Baron]
Thanks in advance for any assistance.
View 3 Replies
View Related
Oct 9, 2006
Hi All,
I am trying to display the result of the difference between two boxes in a new unbound text box.
Basically, I have a box called "Initial Downtime" --> display the system downtime
Than another box called "uptime"--> display the time the system cam back up.
I would like a third to display the difference between the two time
Any ideas on how to do this in a form?
Any help will be gratelly appreciated
View 1 Replies
View Related
Jul 12, 2013
the [EFS] and [CB] is one of the team for handling the project but after I execute the query as below , it just show -1, 0 as the picture but they are orginally Yes/No box from the table, how can I display the result as a Yes/No box instead of -1 ,0
--------------------------------------------------------------
SELECT Projects.[Project Name], Projects.[EFS],Projects.[CB]
FROM Projects
WHERE (((Projects.[EFS])=Yes) AND (([Forms]![A]![EFS])=Yes));
UNION SELECT Projects.[Project Name],Projects.[EFS], Projects.[CB]
FROM Projects
WHERE (((Projects.[CB])=Yes) AND (([Forms]![A]![CB])=Yes));
View 1 Replies
View Related
Jan 7, 2007
Hi,
I'm trying to work out a formula in a query.
At the moment it looks like this:
Days on Hold: calcworkdays([on hold date],[off hold date])-1
Now i have a module thingy set up (calcworkdays) which works out working days. What this expression does, when theres an on hold date and an off hold date is work out how many working days something is on hold.
Now, problem is, not always is something on hold, therefore fields are often blank and then i get a result in query that says "#Error", but i want to use the answer to this expression in another formula, but when error is displayed it makes the other query show error too.
What I want is some sort of If statement or similar so that if no results exist to display "0". Can anyone tell me how to add this in?
I'm a total Access Noob, it took me forever to work out this working days thing (damn access for not being as simple as excel!)
I think my problem might lie in the way the function has been written. I think i might have to modify this to show "0", rather than "error"
This is what ive got in the function.
Public Function calcWorkDays(dteStart As Date, dteEnd As Date) As Long
Dim i As Long 'day counter
Dim dteCurDay As Date
'set i = 1 if you want the first date to count as a full day
'or i = 0 if you do not want the first day to count as a full day
i = 0
dteCurDay = dteStart
Do Until dteCurDay >= dteEnd
'check date against holiday table
If 0 = DCount("[HolidayDate]", "tblHolidays", "[HolidayDate] = #" & dteCurDay & "#") Then
'continue checking for weekdays
If Weekday(dteCurDay, vbSunday) <> vbSunday And _
Weekday(dteCurDay, vbSunday) <> vbSaturday Then
i = i + 1
End If
End If
dteCurDay = DateAdd("d", 1, dteCurDay)
Loop
calcWorkDays = i
End Function
Any help would be much appreciated!
Thanks
View 1 Replies
View Related
Jun 22, 2005
I wish to print the result from query in a subform. In my main form, I had a textbox call 'year' which asking user to input a valid year. The query will have to find out all the records that are in that particular year, one year before and one year after. After that, it should display the result in datasheet form. Can anyone out there help me in this matter?
My second question is Can we use crosstab query in the subform?
Thank you.
View 2 Replies
View Related
Dec 28, 2012
I have two forms...frm1 has a text box with an expression in it and I need frm2 to display the result of the expression. I'm using the DLookup expression and it either gives me #Name? or #Error? message in the text box frm2.
=Dlookup("[loan#]","tbl_loan","[Days] =" & Forms![frm1]!Days) <that gives me #Name? message
View 7 Replies
View Related
Jan 29, 2008
Hi there !
I display some buttons on my Form. I should do an SQL request to know how many and what the button should display. It works fine with a RecordSet.
Now I want to move the code that do the stuff to a function. I read that I can't return a pointer to a RecordSet and I should used a variant with a getrows.
So I try this :
*here is my function
Function get_nom_operation(ByVal cnn As ADODB.connection) As Variant
Dim requetteSQL As String
Dim rst As New ADODB.Recordset
requetteSQL = "SELECT libelle " _
& "FROM operation;" _
rst.Open requetteSQL, cnn
get_nom_operation = rst.GetRows
End Function
* and here is the code that call the function
Dim res As Variant
Set res = get_nom_operation(conn)
Dim i As Integer
'i = 1
For i = LBound(res) To UBound(res)
Set Obj = Me.Controls.Add("forms.CommandButton.1")
With Obj
.Name = "monButton" & i
.Object.Caption = res(0,i)
.Left = 14
.Top = 25 * i
.Width = 60
.Height = 20
End With
'ajout de l'objet dans la classe
Set Ge = New gere_event
Set Ge.CButton = Obj
Collect.Add Ge
i = i + 1
Next
But it doesn' work, and I don't know why...
The error doesn't show where the code is stoped, but only show the call to display this form.
someone could show me some way to find the solution please ?
Thanks a lot.
View 1 Replies
View Related
Apr 1, 2006
Hi there,
I've read through the forums on saving the results of a calculation into a field is a bad idea. I somewhat understand the reasoning for it. But I don't think such situations arise for everyone.
But I have gone with the suggestion and created an updatequery, which simply goes through and updates the calculated value into a table. Now each time the updatequery is run its asking for permission as to the fact if I'm sure I want it to be run. How do I turn this option off. And should I call this updatequery afterupdate or beforeupdate?
Thanks
View 3 Replies
View Related
Apr 12, 2006
Hi All, I hope someone can help with this, I have 2 tables, 1 main table that holds all my part data ( ie part num, description, etc) and a second table with vendor info. On my Form I have all my fields that display the record. I placed a combo box on my form that I need the user to be able to select a vendor, which is working but I need the form to show the vendors part number in a field. The main table has a manufactures part number, and I have 3 fields that have my 3 vendors part numbers for that part in it. I have the combo box so that it shows the vendor name but how do I get it to look at a certain field for the vendor part number. Im still really new to Access and am clueless any help would be greatly appreciated. I know I have not explained this every well so I am attaching a sample of the DB so you can see that I have Thanks again
Thanks everyone..
View 4 Replies
View Related
Dec 10, 2012
I have a database that I have created for work. On the form I have several dlookups running. A couple of them show up as expected. But most of them are showing up blank. That is until you click on the box, then the result appears. Changing the Locked and Enabled settings does not resolve this.I have the database locked up for normal users. When I access it by holding shift while opening, when I access this form, the dlookups all show the desired results. No clicking on the boxes required.
I've tried refreshing, but that doesn't work. If I write code that loops through all of the textbox controls, setting focus on them and moving throuhg the form, then the results will show up. Basically having VBA click on the boxes for me. Although this works, there is a slight lag and screen flicker as it sets focus to all of these textboxes.
View 4 Replies
View Related
Mar 25, 2013
I have a result for a query made from four different tables for which I would like to refine the result of this query grouping multiple rows into columns.
Attached is a pdf file showing the results being obtained by my query and underneath is how the result would like it be after running the query.
I am currently using Access 2010.
View 5 Replies
View Related
Apr 3, 2014
I am maintaining an Access 2003 application that is running on Windows 7 64Bit Enterprise OS setup.
I have a form in the application that displays a number of records with each record having a unique id and a field called ClockHrs which is stored as a Number (Long Integer) type.
I have a textbox that displays the sum of the ClockHrs field.
The textbox contains no code behind.
The Control source property of the textbox is set to '= SUM([ClockHrs])'
ClockHrs
10
10
30
15
10
15
25
===
115
The textbox displays the result of the sum 115 in scientific notation as 1.15 +02 .
View 3 Replies
View Related
Jun 24, 2014
My question is that can we do multiplication of data of two columns and result is automatically displayed in third columns in datasheet view.? Is it possible ?
View 1 Replies
View Related
Sep 2, 2014
I want VBA code that will perform the following steps. The Table1 has following fields:
ScanDate,NewBatchNo,BatchNo,PolicyNo
1. First of all look into Table1 the scandate<=29082014 and then check if there is No NewBatchNo of the corresponding record then capture its corresponding BatchNo of each record whose scandate<=29082014
2.Then check for the batchno that we have captured in another table Table2 and if its present then return corresponding PolicyNo. Now keep on searching that policy no in Table2 as it could be present 50 times in the table and then return corresponding batch numbers in excel sheet of that Policy No as below:
BatchNo - Policy No - Batch No1 - Batch No2 - Batch No3 ---------------
View 1 Replies
View Related
Oct 17, 2014
I have a form based on query. On form i am retrieving data from another table using DLookup in a unbound text box. So I want to save the result of DLookup function in another field/table on same form.
View 8 Replies
View Related
Feb 4, 2015
I am using the dcount function as the example I display below. The problem is that it returns the correct result (i.e. 59) but the data type is text (59 is on the left side) . I need this to be number.
=DCount("[OrderID]", "Orders", "[ShipRegion] = 'CA'")
View 3 Replies
View Related
Jun 25, 2014
I have saved query object named qrySearchBill. I wan to call this query through vba and display the result in a subform named subQrySearchBills in datasheet view. Here's how I want it to work:
When the main form loads, I want all unfiltered records to be displayed in the subform initially. The user may then decide to filter based on date range, so he enters startdate and enddate parameter values in their respective textboxes in the main form. Then click search button to run the saved query based on the date range parameter taken from the textboxes.
I have this code so far:
SQL of the saved query object:
Code:
PARAMETERS [StartDate] DateTime, [EndDate] DateTime;
SELECT tblInvoice.BillNo, tblCrdCustomer.CstName, tblCrdCustomer.CstAddress, tblCrdCustomer.Island, tblInvoice.Date, Sum(tblInvoice.[TotalPrice]) AS Amount
FROM tblCrdCustomer INNER JOIN tblInvoice ON tblCrdCustomer.IDNo = tblInvoice.NameID
WHERE tblInvoice.Date Between [StartDate] And [EndDate]
GROUP BY tblInvoice.BillNo, tblCrdCustomer.CstName, tblCrdCustomer.CstAddress, tblCrdCustomer.Island, tblInvoice.Date;
vba code to call the query and its parameter:
Private Sub btnSearchBill_Click()
Dim qdf As DAO.QueryDef
Dim rst As DAO.Recordset
Set qdf = CurrentDb.QueryDefs("qrySearchBills")
[Code] ...
This code works fine except that when the main form loads, a prompt window appears to ask for the value of dateStart and dateEnd. I don't want it to prompt because it's suppose to get these values from the main form's textboxes (txtStartDate and txtEndDate respectively), plus it should initially display all the unfiltered records.
View 3 Replies
View Related
Oct 17, 2007
Let me start by saying I am very, very new to Access, but have been assigned a report to create.
I have the following textbox in my report:
=[Location]+(Chr(13) & Chr(10)) & [callnumber]+(Chr(13) & Chr(10)) & [Online Availability]+(Chr(13) & Chr(10)) & [PF Subject]
I'm using this format so that my 4 fields appear in a list and don't leave blank lines if the one of the fields happens to be empty.
The problem is that I need to alter or substitute some text.
First, in the location field, I can have several different entries, but if the entry is 'Circ', I don't want that text to display and I don't want a blank line either.
Secondly, in the online availability field, if there is any value in the field, I want whatever text that is to change to something like 'Online - Yes'. If there is no value in the field, nothing should display.
I think the use of the Iif function should work, but I can't seem to write it correctly. Help!!
View 5 Replies
View Related
Aug 19, 2013
I have loads of projects in a table, they all have a status (eg Red, Green, Amber).
I have a query for each so if you run qry_RagRed, it will show in a sheet all Red projects and obviously have a total in there.
So I have a form which has buttons on it for navigation, what I want is to display various things on there so for example, a field that simply has the number of red projects, or green etc.
All I want it to do is tell me a number based upon number of items in a query.
View 5 Replies
View Related
Jul 1, 2013
I have an access report that there is One column among 9 of them, refuse to give answer.. Its suppose to Sum all the total of each line in the column. See Attachment. This report is group by ID and sort by Shift. The formula is: Sum([Rates]), and the Rate is list in Details Report where the Sum ([Rates]) is located in Id Footer section.
FYI, when I ran this report, it does not know what the Rate is. However, the rate is the formula which listed accordingly in the report details.
View 3 Replies
View Related
