I would like to tweak my database so that when it opens for the users it will not show the minimize, maxamize, and close buttons at the top. Also, I would need code that will maximize my forms automatically. Let me know if this is not a good idea? I am trying to eliminate someone thinking that the close button will act as a cancel button. I dont want them to save information on accident since access saves automatically! (I already have a close without saving button on every form but people are used to closing document to not save them)
Hi, I am trying to create a database from scratch, however I need multiple users to have access to it. I do this nearly everyday and have no issues on the LAN we use.
This week I have been struggling to create a database on a different LAN. I create the database however I get the message that it is read only when I close it and enter it again. This means that other people are also unable to open it at the same time, and when they managae, they only get read only access.
Could this be a strange unfamilar-to-me LAN set up? Or is there something fundamental that I am not doing when creating this database?
You helped me solve my linking issue with my front-end/back-end database, but I've got another question. Whenever I open up the front-end ( the shortcut to it anyway), I can't open it in edit mode- only edit. Even if I do a fileopen and select the type of open I want, it doesn't work. How do I open it in edit mode so I can link the table?
I created a database in Access and of course password protected the backend version. As a matter of course I backed up the mdb to cd in case of emergency.
Our network has been taken down due to some virus being bought in by a laptop user so I wanted to reinstall the mdb from the cd to my c: drive.
The problem is that the file is saying that it is 'Read Only' which I think is down to the password protection i put on there.
Question: Is there a way I can get round the security?
I have a database running for the last 6 or so years (A97) and have the ctl-shift disable enable code in it to stop people tinkering about with it.
The database was aparently working fine yesterday and today it's decided to be read-only so no-one can update the data.
It's on a server - all permissions ok and not read-only.
I can't get the disable/enable code to work either. So basically, it's locked for any development changes and it's locked for any data changes.
The IT boys are going to take a backup from the tapes of the server and re-install it, so it should be ok, but I've never had this happen before and the database is used daily for the last 6 years with no problems.
Any speculative thoughts?
[edit] I have done a search and couldn't find anything that fitted the situation
I am having problems with ODBC Access data source name. When I want to display some database data in a html table on a webpage there is no problem. But when I send data from a html form to the database I get an OLE DB error. (I am using ADO). I can't remember the message exactly but it was something like
Microsoft OLE DB Provider for ODBC drivers error '80004005' [Microsoft][ODBC Microsoft Access driver] The command must be execute on a query which can be edited. insert.asp, line 50
For some reason my database is read-only. And I don't want that. I tried 1. ODBC administrator deleting and creating a fresh System DSN, checked if there Read-Only wasn't marked on. 2. Deleted my browser cache. 3. Restarted computer several times again 4. Installed MDAC 2.8 again.
btw. I have created the table with MS Access XP and i am using Windows XP. Below is my code.
[code] <FORM ACTION="insert.asp" METHOD="post"> Barcode: <INPUT TYPE="text" NAME="a1" SIZE="15"><BR> Artist: <INPUT TYPE="text" NAME="a2" SIZE="40"><BR> Album: <INPUT TYPE="text" NAME="a3" SIZE="50"><BR> <INPUT TYPE="submit" VALUE="Send"> <INPUT TYPE="reset" VALUE="Clear"><BR> </FORM> <% a1 = request.Form("a1") a2 = request.Form("a2") a3 = request.Form("a3") if ((a1 <> "") and (a2 <> "")) or ((a1 <> "") and (a3 <> "")) then Set db=Server.CreateObject("ADODB.Connection") db.ConnectionTimeout=40 db.Open "DSN=pieter", "admin" sql = "INSERT INTO albums VALUES ('"&a1& "','"&a2& "','" &a3& "')" Set rs = Server.CreateObject("ADODB.Recordset") <----- Here is the error ----> db.execute sql db.close Set db=Nothing end if %> [code]
I have a FE DB that I have been opening and closing at various times without incident. Now all of a sudden it only opens as READ ONLY. I can't find anyone with a BE open that might be causing this. What will cause this? If I save a copy and then replace the original will I lose my data?
Does anybody know if there is a quick way of making a database read-only (so no data input OR design priviledges).
Ive had a request to send somebody a database so they can look at the data but not add/amend etc. The only thing I can think of is adding a security workgroup and assigning read only permissions. But this seems a bit long-winded and I wondered if I was missing something obvious like a 'save as - read only' option.
Each time a person comes into our building, they use a electronic key. The information is recorded into a text file. I would like to extract information as described next
The date from the line marked D. Date is marked in bold
The time from the line marked T. Time is marked in bold
The key number and Location from the line marked M. Key Number & Location is Marked in Bold
I am reasonably familiar with access but I have not had any experience with Text Files . Could someone post a sample db that would give me a starting point. any information would be appreciated.
I have an access database and some asp-code on my computer which only works one way? I can read from it, but not write?
...and when I put the asp-code and the database on anohter server it works fine. ..what setting do I have to do, to make it work on my computer?
I have another asp-site with a mySQL-database on my compter which works fine...but it doesn't work with my access-database...hmm...I can only read from it.
I have a MS Access 2000 database application stored on a Novell Network server and being shared more than 20 users. However, occasionally, different users, who want to open it in the morning have the error message The database 'Name' is read-only. Therefore, those users can NOT run any action or procedure queries/reports. To resolve, we have to disconnect all the current users, who previously open the database, then everybody can open WITHOUT the "read-only" error!!??
Please advise any permanent solution to avoid the "read-only" issue without disconnect all the users who already open the database?
I'm sure it's not random, but it doesn't seem to follow any sort of rules. My database has become "Read Only" 3 times now causing all workers using the database to stop work until IT can fix the issue. All IT does is kick everyone out of the folder that my db is in and suddenly it is no longer read only.
Been using XP all this time, just got a new computer with Windows 7. Still using old Access 2000, not my call to update as this is the decision of the guy who owns the database.
Anyways, I opened Access for the first time, just a blank database so I can set up the user account. When I go to Tools > Security > User and Group Accounts and try to assign a password to Admin, I get the error message that it cannot update because the database is read only.
Where did this come from? I have never seen this message before, and the person who owns the database has a couple computers with Windows 7 that I have set this up on and did not run into this issue.
I realize that there can be some compatibility issues with Windows 7 and Access 2000 but it has worked on other Windows 7 computers, and not using the virtual XP mode.
I have read only access to a database maintained by a vendor. I am using an append query to search for new records in that database every time my database opens through a macro. This adds any new records to my table. I then add additional information to each record in my table. This is newly acquired information, not calculated, and it is different for each record.
My question is can I keep my table up to date with the vendor table without running the append query macro at open every time as my database may remain open for extended periods of time during updating of records.
I have a simple database that is on a desktop that I have a shared folder and have not had issues till now. What would cause it so say, "This database has been opened read-only." Nothing has changed. Only thing my co-worker did was reboot the machine a few days ago.
I have created a database with multiple user and I have stored it on a file server. The remote users have been given read write permission on the server. However when the person opens the database it is read only. I have not to my knowledge made the file read only as I am able to work off the same file from the server. I made sure that no one was using the database when It was opened but it still comes up as read only. She is able to access the database and work in it but she is not able to modify anything and she does have permission within the database to do so.
I have 2 tables and from them I do a query called "Query_Dates". There, I created 4 calculated fields which compares fields of the two tables previously mentioned.
What I am trying to do is everytime the calculated fields are equal to "Diff", gets the value from the second table (ADHOC) and and puts it in the 1st table (Master_Table). In total there are 4 fields I would change depending on other 4 fields called (CheckRR, CheckQual, CheckProd, CheckCap).
The problem is that it gives me an error 3027, object is read-only.
Below, you can find the code.
Private Sub Comando27_Click() Dim rst As DAO.Recordset Dim rsd As DAO.Recordset Dim supplierName As String Set rsd = Application.CurrentDb.OpenRecordset("Query_Dates", dbOpenDynaset) Set rst = Application.CurrentDb.OpenRecordset("Master_Table" , dbOpenDynaset)
I am having problems opening my databases. Access automatically opens them in 'Read Only' mode, and I cannot find a way to avoid this - so I can never add data to the original tables ....
I would like to be able to check if a db is open and if it is to prevent the user from proceeding.
I use the Access 2013 Runtime. I can check if a db is open by trying to open Exclusively, using something like
Code: [URL] ....
But if the db is already open Not exclusively and I try to open it exclusively it does not raise an error and it allows the user to open the db in Read Only mode.
I would like to be able to prevent this, because careless and/or inexperienced users may open several instances of the db.
Of course, if the db is already open exclusively it does not allow you to open it exclusively another time.
I started quite simple, just wanted to read to node MsgId. This is the code I use:
Private Sub ReadXML_Click() Dim aDoc As DOMDocument60 Dim aNode As IXMLDOMNode Set aDoc = New MSXML2.DOMDocument60 aDoc.async = False aDoc.Load DLookup("C:Sample.XML")
[Code] ....
Whatever I try: //MsgId or MsgId the results is "No nodes". How to read to XML.
Besides reading one node, the next challenge will be iterating the PmtInf node. There can be 1 in the XML file but also 50.
