Unable To Add Record To A Table
Mar 2, 2007
I have a database that has been working properly for months...however, suddenly I am unable to add records to a number of my tables.
Each of 10 tables are related to a main table with a 1 to 1 relationship - the relationships have not changed.
Can anyone think of any table setting which I may have inadvertantly changed that would prevent additional records from being added?
I am still able to add to the main table and I have added several new tables also with a 1 to 1 relationship with the main table that are all working fine.
Thanks!
View Replies
ADVERTISEMENT
Apr 28, 2015
I have been using my db for 3 years without this particular problem: I am now unable to add records to one of my tables - either through the form or in datasheet view. I have a patient table and a visit table. I put in the patient data using a form and then go to the visit form to add all of the visits for the month. I have never had a problem adding data to any of my tables but now I am unable to add data to the visit table. As much as I didn't want to I brought up last month's back up to enter the patients again. Before I did I checked to see if I could add visits - I could not. So I checked January's back up - same issue. I made no changes to the db before trying to add a visit .
View 10 Replies
View Related
Oct 31, 2005
I have a database set thus
Clients (the main form)
ClientsID (PK)
blah blah
Information and Referral (a check box)
blah blah
blah blah
ClientIR (the form that opens up when I & R is checked)
IR ID (PK)
ClientsID (FK to the above form)
Requests (a lookup referencing to IRCategory)
The code is set up so when the I R box is checked, form will open, and unchecking it will delete the I R record of that Client.
The problem is when the IR Box is already open, the request has been selected, I cannot save it as Access says a record is required in the Clients form. There are only two buttons, one goes on to next requests (one client can have more than one requests), other saves and closes.
The Client form is already coded so it will save the Client's record before opening the IR Form, and either button will save the IR record as well.
I had referential intergrity turned on. Turning it off only gave me weird results (I was able to input records, but Access didn't autofill the ClientID in the IR records, and looking at Clients returns a blank IR record)
What am I doing wrong?
Thanks
View 14 Replies
View Related
Jun 5, 2006
Hello everyone,
Can anyone help?
I have a data entry form via which I want to add records to a table. However, when I've entered data in the last field, the cursor remains there and the system just beeps. I added a command button on the form to go to a new record but when I click on the button i get the following message:-
You can't go to the specified record
You may be at the end of a recordset
Any suggestions??
Thanks
Will
View 10 Replies
View Related
Oct 18, 2015
Created three tables and one linking table, created two queries linked to a form to display the results and have now setup the code to display details. Next step to create a form to add a new record to the database.
Initially I used the form wizard, dragged the fields in and then viewed the form to see if I could add a record.However the new record button at the bottom is greyed out.I checked the Form properties and allow editions, deletions and edits are all set to yes.the source for the form is:
Code:
SELECT [tblGraves].[Plot], [tblGraves].[GraveNo], [tblGraves].[GraveID], [tblDeceased].[Forenames],
[tblDeceased].[Surname], [tblDeceased].[DayOfDeath], [tblDeceased].[MonthOfDeath],
[tblDeceased].[YearOfDeath], [tblDeceased].[DayOfBurial], [tblDeceased].[MonthOfBurial],
[tblDeceased].[YearOfBurial], [tblDeceased].[Age], [tblDeceased].[pp], [tblDeceased].[Notes],
[Code] .....
and it is a dynaset record set type.So I thought ( dangerous I know) use a query, I created the query setup the joins etc etc.I double clicked on the query and all my records were listed, I then selected the new record and the bottom but that is greyed out as well.
View 14 Replies
View Related
Apr 29, 2008
Hey Guys and Gals,
I have a form that has a drop-down box. When the form opens, all the records are shown. Once a name is selected from the drop-down, only the records associated with that name are shown (a filter is created using code). The problem is that once the selection is made, I am unable to edit the records. I try to click in the fields but am unable to.
Any ideas? Thanks
View 5 Replies
View Related
Jan 25, 2007
I have a problem where a user (with what I believe are the proper security settings) cannot save a new record in a form. I have set the securities on the form and the related table and query to allow this user to create new records (Add/Run).
This user is able to access the form and enter the data, but it will not save. I have added a "Save" button to no avail.
When I log on as the administrator, it works fine.
Any Ideas?
Thanks in advance.
View 3 Replies
View Related
Mar 3, 2015
I'm trying to add hidden information to a record and need to know the best way to do it.
I have a visible table that all users enter data into using a form.
I also have a hidden table that contains 2 fields "linked Table ID" and "notes"
I have a box at the top right of my form which is white (I also have a white background so it's impossible to see).
When you click the box it changes a textbox on my form visible property from false to true.
then I plan to use a separate button that the user currently uses to save a record to store ID number and hidden textbox information in the hidden table but I'm sure how to do this.
Finally I will use a hidden query which will display all the fields from both tables using the linked Table ID from the hidden table and ID field from the non hidden table.
So i have 2 questions:
1 how do I save information the user entered into a form created from one table into a different (hidden) table
2. Is this the right approach to this problem?
View 3 Replies
View Related
Jun 4, 2014
I tried to follow the Allen Brown print the current record in the form and its not coming up. I can print all of the records but not the current.
View 3 Replies
View Related
Nov 29, 2013
I am trying to create duplicate records from a main form frmManagers which has a subform frmSubMeasure. I have placed the duplicate button on the main form. It creates a duplicate of the main form data and gives me the option to add new record to the sub. I want the duplicate to be created on the sub form for me to just edit the scores.
I don't know how to pass the sub form data to be duplicated I thought the append query which I used would update the tblSubMeasure table which created the subform frmSubMeasure.
In the sub the append query do update the form with the new MeasureID from the mainform and the form is available to enter new data. I want the subform data to be duplicated as well
In the query I included all the fields from the tblSubMeasure table and this is appended to the same table tblSubMeasure and I place a tag on the MeasureID using "[Forms]![frmManagers].[Tag]"
Code:
Private Sub btnDuplicate_Click()
Dim dbs As DAO.Database, Rst As DAO.Recordset
Dim F As Form
'Return Database variable pointing to current database.
Set dbs = CurrentDb
Set Rst = Me.RecordsetClone
[Code] .....
View 1 Replies
View Related
Oct 14, 2013
Why I cannot print a report using a single record in a form using Access 2007.
I have added the button, I am using the following code:
Private Sub cmdPrintRecord_Click()
Dim strReportName As String
Dim strCriteria As String
strReportName = "Receipt"
strCriteria = "[ID]='" & Me![ID] & "'"
DoCmd.OpenReport strReportName, acViewPreview, , strCriteria
End Sub
However when I click the button nothing happens. I have attached the database ...
I am using the Contacts Entry form, and when I am on a record that someone has paid I want to be able to print from the Receipt report that has a simple formed up letter.
View 8 Replies
View Related
Apr 25, 2005
Trying to update a field in a record in my form after selecting from a comboox.
This an orders form with a record per row for order items. I select the product from a dropdown list which is populated by a dynamic query from the afterupdate event on another combo. When I do the selection access reports the following error:
Runtime error 3331
to make changes to this field, first save the record
Debug takes me to the line :
Me!product_id = DLookup("product_id", "products_table", myvar)
from :
[code]
Private Sub comboProd_description_AfterUpdate()
Dim strFilter As Integer
comboProd_description.Value = comboProd_description.Column(1)
myvar = comboProd_description.Column(0)
Me!product_id = DLookup("product_id", "products_table", myvar)
[end code]
I'm lost as to what to do (no such thing as beginners luck!!). I'm not even sure if the error is from the combo box or from the field that it is trying to update (product_id)
Thx for looking
Kev.
View 1 Replies
View Related
Aug 1, 2014
I am trying to match if a user has already started a record using the date and username. I have written the following code but I keep getting a error 94 about null. I know its an issue involving the date part. why this isn't working.
Code:
DLookup("TimeSheetID", "TimeSheet", "EmployeeID=" & Nz(Me.ListEmploy.Value) & " AND TimeSheetDate=#" & Date2 & "#")))
The full code
Code:
Dim Date2 As Date
Date2 = Date
If (Not IsNull(DLookup("TimeSheetID", "TimeSheet", "EmployeeID=" & Nz(Me.ListEmploy.Value) & " AND TimeSheetDate=#" & Date2 & "#"))) Then
lngEmployeeID = DLookup("TimeSheetID", "TimeSheet", "EmployeeID=" & Nz(Me.ListEmploy.Value) & " AND TimeSheetDate=#" & Date2 & "#")
DoCmd.OpenForm "frmTimeSheetMain", , , "TimeSheetID=" & Nz(lngEmployeeID), , , "NoTimeSheetID"
View 5 Replies
View Related
Apr 30, 2014
My database was working fine. Now, if I have to save or edit a record, I get a message Run time error 2107. The value you entered does not meet the validation rule defined for the field or control. I am able to enter and edit new records in the table. I did not change any validation in form. Then it goes to debug mode and highlighted this code (me.recordsource=Listsql - is highlighted)
Private Sub ListSearch_Click()
Dim dBS As Database
Dim Rst As Recordset
Dim Listsql As String
Set dBS = CurrentDb()
Listsql = "Select * from MasterData where employeeid ='" & [Forms]![MASTERFORM]![ListSearch] & "'"
[Code] ....
View 3 Replies
View Related
Aug 22, 2014
I am attaching a picture of what I am talking about as this is going to get confusing...at least it is for me.
I have a Navigation Form that holds 7 tabs that pull reports or data entry forms.
I am trying to get the Preview Selected Record function to pull the UniqueID field from the Data Entry Form and generate a report for printing.
I can search by UniqueID in the data entry form with no problem, it is linked to two subforms with no problem.
Here is the code I have used most successfully:
Code:
DoCmd.OpenReport "rpt1", acViewPreview,, "UniqueID =" & Forms!MainForm!NavigationSubform.Form.UniqueID
This actually works, but every time the print preview is closed, it crashes Access. I have researched this particular issue, and some of the solutions I have read and tried lead to "that method is not allowed or supported" errors or Run-Time 438 errors.
View 9 Replies
View Related
Sep 13, 2007
We are using access 97 and I have a linked table to sql 2000. A couple of weeks ago, our sql server crashed and we had to completely rebuild it / restore all of the data. Ever since then, only one of our linked sql tables in access is acting up. Whenever we go to edit a line (sometimes, not always), we get an error which states the following:
This record has been changed by another user since you started editing it. If you save the record, you will overwrite the changes the other user made. Copying the changes to the clipboard will let you look at the values the other user entered, and then paste your changes back in if you decide to make changes.
Options are Save Record (greyed out), Copy to Clipboard, and Drop Changes.
About all I have tried is re-linking the table...any other ideas?
View 2 Replies
View Related
Apr 7, 2014
I created a table to keep contact information such as address, phone number, and email address of instructors. I also modified the New Instructor Entry form to add an email address, since we usually have this when hired.
The problem arises when no such information exists for an instructor. I have attached a "sample" database with all the important components and "sample" data.
When I choose an instructor in which some contact information exists, the Instructor Contact Entry form performs as expected. On the other hand, if no information for an instructor exists, the information can be entered, even though the Employee Number, Family Name and Given Name fields are blank, contrary to the first case. Not only can the information can be "saved" but no data appears in the table.
How do I have to set this up to get it to work for an instructor not in the table?
View 3 Replies
View Related
Jul 25, 2013
I am currently unable to delete any data from my table. When I highlight a row and right-click, the option to delete the record is grayed-out. I have deleted and recreated the table and relationships, saved the database as a new file, and compacted and repaired, but I am still unable to delete anything.
View 1 Replies
View Related
Dec 4, 2007
Hey
I have a procedure that imports excel spreadseet to access table ever today.
today it failed. Forrmat was the same as yesterday.
I did 'copy/paste special/format' from yesterday's file; still today's file wouldn't import.
Tried to copy manually to the table, got the error message about 'field not being in the same format'
Went to table's design view, and changed everything to 'memo', the was able to do copy/paste.
There wer no values with more then 20 characters
I was able to change 'memo' back to text and date/time without loosing any date.
Has anyone ecountered this ? Going changing table, and then chaging it back doesn't sound like the best practice
what can be done ?
can abything be done to excel file ?
View 3 Replies
View Related
Sep 7, 2013
I'm using Access 2007.
I have a button on a form that when clicked, does the following:
I have a table called [Workorder Parts] that has 128 records in it with Fields named WorkOrderPartID (Autonumber), WorkorderID(Number), PartID(Number), Quantity(Number), UnitPrice(Currency), Notes(Memo), KitID(Number).
I want to copy records into another table called [tKitsWorkorderParts] that has the identical structure based upon a value in the field WorkorderID. For testing purposes let's assume that the field contains the value "12". There are 28 records in the table that have the value set to "12"
If I hardcode the value "12" into the following SQL statement, it finds and copies the 28 records correctly.
DoCmd.RunSQL "INSERT INTO [tKitsWorkOrderParts] SELECT * FROM [WorkOrder Parts] WHERE [WorkOrder Parts.WorkOrderID] = 12"
so far so good.....
Now, on the form there is a Text Box called WorkorderID that contains the value "12".
If I change the code to the following, I get all 128 records instead of just the 28 I am expecting:
DoCmd.RunSQL "INSERT INTO [tKitsWorkOrderParts] SELECT * FROM [WorkOrder Parts] WHERE [WorkOrder Parts.WorkOrderID] = WorkorderID"
I have inserted a few MsgBox displays to display the value contained in WorkorderID and it shows "12"...
What am I doing wrong???
View 2 Replies
View Related
Jul 23, 2015
I was updating my records by filling a form and entering the data's into a table but all of a sudden i couldn't add data to form and table..
View 9 Replies
View Related
Aug 14, 2012
I have a Union query that is linked into about 10 different excel spreadsheets on our drive and it pulls back only 3 columns of data (Document Number, Date Registered and Date Implemented). I then have another report which refers to the results of this query and does its own thing from thereon.
Here is a sample of the SQL:
SELECT CINT(RIGHT(RT_01000.[Rev-Trac Number],5)) as [Document Number], RT_01000.[CC_RT Issue Date] as [Date Registered], RT_01000.[Actual Delivery Date] as [Date Implemented] FROM RT_01000;
UNION SELECT CINT(RIGHT(CC_RT_01000.[Rev-Trac Number],5)) as [Document Number], CC_RT_01000.[CC_RT Issue Date] as [Date Registered], CC_RT_01000.[Actual Delivery Date] as [Date Implemented] FROM CC_RT_01000;
My Issue:
As it is above, the query will run, but we end up with duplicate numbers in the "Document Number". It only brings back the final 5 digits from each of these files and ignores the differenciating part of the number, the "CC_RT_" or the "RT_". This causes huge issues in the file which then goes onto use these results afterwards.
My Plan: (failed)
I thought I could simply update the "5" to an "11" to catch anything named "RT_00001" and also "CC_RT_00001" serperately so I can clearly see which is which without any duplicates. However, I recieve the below error when doing so:
"Data type mismatch in criteria expression".
I've been playing with this for hours and unfortunately many many reports reply on these results being correct. It is also not possible to change the names of the RT and CC_RT files that it links into.
View 2 Replies
View Related
Oct 16, 2012
I am trying to import a series of records from Excel into a table in Access 2010. The field names in the Excel table match the field names in the Access table. The field formats are the same as well (both set to numbers).
I am receiving an "unparsable record" error for all fields in the Excel file that are being entered into fields in Access that are 'lookup' fields that allow multiple entries.
The Exel fields have been filed in with the 'numbers' that correspond to the correct 'lookup' selections. There is only one item in the excel field -> while access will allow multiple entries for the field, I for the records I'm importing I only need one.
For the fields that are 'lookup' but allow only one value the excel data is being imported and displayed correctly in Access.
Do I need to format the fields that are matching to multiple entry fields differently or in a special way?
View 7 Replies
View Related
Mar 24, 2014
I'm having a problem with a database that i had split. While creating teh database, i had it stored on my personal drive at work, but wanted to move it to the shared drive so the data could be stored there. this is to deal with cross site network connectivity issues that we encountered with another database here at work.
When splitting the database, i split it on my personal drive and then dragged the back end to the common drive. I realized my error, but when attempting to correct it, i somehow have two of the same file, and no back end?
I receive the error on the attached document when attempting to access any of the tables or information in either of the files, the "back end" that i placed on teh drive, and the "front end" that i have on my personal drive.
I also tried to relink the tables through the linked table manager, but receive the same error when attempting that.
Is there a way to recover from this? I had backed up my file by making a copy prior to splitting, but somewhere in this process, this became linked to these and is having the same issue. Is there a way to recover the old "unsplit" version? I cannot copy over all of teh tables, etc. because i get the same error as earlier.
I can attach a copy of my database for reference...
View 5 Replies
View Related
Apr 10, 2012
I am trying to create a form on Infopath 2007 based on a table in access 2007. I want my users to be able to fill in this form and submit it back to me in such a way that it will directly populate the table in the database. I know I can do this. However, I am unable to modify the infopath that access 2007 creates from the table. I want to change the date format. By default it takes up the date as "date and time" and I want it to be the date only.
View 4 Replies
View Related
Sep 17, 2013
I am trying to make a crosstab query to filter my records from my table.
Here is the scenario.
I want to make a query that will return me my Rep ID, Rep Name, his Bonus and his GV-Q (another value) based on every month.
Now I make a crosstab query and here is the syntax.
Code:
TRANSFORM First([TBL Qualification Data India].[Bonus Rank]) AS [FirstOfBonus Rank]
SELECT [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
FROM [TBL Qualification Data India]
GROUP BY [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
PIVOT [TBL Qualification Data India].Period;
This resulted in a column for Rep Number, one column for Rep Name and columns for all the period of Bonus I am going to have., so there are basically 9 columns for this till this month for each month and bonus value shows as values for all these month (period) columns.
Now in this same syntax, I want to have my Rep GV-Q value as well as his bonus to show in the same query, I read and came to know that it's not possible to directly have two values or two column headings in a crosstab query, I must have to make a new crosstab query and then use a normal select query to display records from these two crosstab queries, so I went ahead and made a new similar but with one value field changed crosstab query and here is the syntax for that.
Code:
TRANSFORM First([TBL Qualification Data India].[GV-Q]) AS [FirstOfGV-Q]
SELECT [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
FROM [TBL Qualification Data India]
GROUP BY [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
PIVOT [TBL Qualification Data India].Period;
Now after this how to make a select query to show the data from these two queries.
I can make a normal query based on these two crosstab queries and manually add all fields and then I would have my result but then after every month I have to manually enter these two extra month details from both crosstab queries to my final query and that's not what I want.
Is there any method to do this by gathering data from these two queries into one and achieve the result I want or if there is any other approach to tackle this.
To explain my database and my need for output, I am attaching few pics to make things easier if I made some mistakes in explaining my problem. It's included in attached zip since I am not able to post images or links.
View 5 Replies
View Related
