Unexpected Error (40230)

Dec 1, 2005

Ever since I switched from using a Mapped Drive to using the UNC path for my linked tables, i occassionally get Unexpected Error (40230).

I noticed this first when i manually re-linked using the link table manager, it linked the tables, then gave me this error several times, likely reflecting the number of tables i linked, but the links refreshed.

I then noticed this error when i used the acCmdZoom method on a textbox control on a continuous form. It opened the zoom, then gave me the same error several times, likely reflecting the number of records on the form, (i just hit the esc key to scroll through all the errors quickly.)

Any thoughts would be much appreciated,

*** UPDATE, Ok, I just did a Linked Table Manager again, got the error 112 times (or so), which is nowhere near the number of tables linked. After the error occurs once, and you perform that operation again, the error does not happen. Same thing when zooming, the error occurs sever dozens of times, but when i perform the zoom again, it does not repeat the error.

STILL NEED HELP

~Scott

View Replies


ADVERTISEMENT

Unexpected Error From External Database Driver

Jun 14, 2006

I am getting this error message:
"Unexpected Error from External Database Driver" when I try to import some .dbf files into Access. I just did some quick research, and it was suggested that I remove or rename the borland driver. Not sure how I feel about attempting that, plus, where do I get a new borland driver once the old is removed/renamed.

View 1 Replies View Related

General :: Unexpected Syntax Error On Update

Sep 19, 2012

I have a website which uses a series oif ASP/VBscript scripts to access and update an Access database. It has run for years on a shared commercial service.I also have a replica of the wesbite on my home pc for development and testing running under XP Pro and IIS. All works fine.

Recently I have had to switch my home setup to my laptop (also XP Pro and IIS). The scripts all appear to work ok except when I try to UPDATE certain tables.

Some give "Syntax error in UPDATE statement."
Some give "Data type mismatch in criteria expression."
Some work without error

Yet the identical script and table on the main site and my home PC work fine and have done for years.

View 14 Replies View Related

"Name" Error In Unexpected Places

Dec 28, 2006

I have a basic form that shows employee information. A few of the fields are calculated or lookup fields. Starting with the first record I can go thru all of them just fine (I don't see any errors in the fields). If I look at my 2nd record twice then my combined name field (first name + last name) shows "#Name?". This error does not occur with my 1st record, just the 2nd one. Also, if I go to the end of my records to where a new record is going to be entered then I get extra errors in my 1st record.

It's kind of hard to explain exactly what's happening without pictures. I'll post some if you think it will help.

In any case, I don't see how a calculated field can work the first time thru but not the second time thru.

View 4 Replies View Related

Unexpected State

Jul 13, 2005

Ok, I know you guys have heard about this problem quiet a few times, my search told me that. But my problem has a bit of a twist. The message appeared when I tried to open the database yesterday, so I went to the backups and tried to open them. All the backups for the past month give the same message. The problem is with the FE only, the BE is working fine. The backups are connected to the same workgroup as the FE and BE. Has anyone seen this before and know what might of happened?

View 8 Replies View Related

Unexpected Behaviour In Sub Form

Dec 24, 2004

Why does my sub form which is contained in a Tab, not display unless a certain field is populated with something? It's not a required field. Infact it is one of two identical fields... a relationship and a lookup to another table. It doesn't matter if the second one if filled in or not. Just this one. The record is in the database, I choose from a drop down in the header... and the subform then requeries and displays the information. However, unless this 1 field is filled in.. the subform remains blank. It is getting on my nerves!!

View 1 Replies View Related

Unexpected Row Inserted In A Code Table

Jun 22, 2005

I have the following tables, tblAudit and tblCriteria. The first records companies and period of audit, the second contains the criteria against which they will be audited. The audit period determines which criteria apply.
Results are recorded in a third table, tblAuditResults.

Relationships
tblAudit 1:M tblAuditResults M:1 tblCriteria

My problem is when I try to add a new result by selecting a criteria via a combo box a new row is inserted in the criteria table as well as in the result table. Inserting a row in the criteria table is wrong.

I have attached the database for you to look at.

Thanks for any advice you can offer.
Fearless

View 3 Replies View Related

Reports :: Unexpected Field Format

Mar 21, 2015

A report field data is sourced from a query which displays its values as a string eg "George Renee", however in the reports it displays data as a number eg 42. It is true that the query field obtains its data from a table which gets its data through lookup Wizard. I really want the report to display string type.

View 1 Replies View Related

Complex Query/form Results Unexpected

May 16, 2006

I've got a query pulling data from a view I created that gives all the data I need. The query gets it's criteria from a form with 10 combo boxes, a radio box with 3 options and 2 date fields for the timeframe to run the report in.

The issue:
over half the columns of data that the radio buttons can limit results by have null values but only two of the columns are excluding records where the values in them are null. As any combination of the combo boxes are null I'm using the following format for my criteria per column
IIf(IsNull([Forms]![Margin Dialog]![InstallerOption]),[Installer_from_Web],[Forms]![Margin Dialog]![InstallerOption])
That is an example of a column that works, the following is a column that is excluding null values no matter what I do
IIf(IsNull([Forms]![Margin Dialog]![AOIOption]),[ProductType],[Forms]![Margin Dialog]![AOIOption])
I am not seeing the error and could use some thoughts.

View 13 Replies View Related

Joins Producing Unexpected Number Of Records

Apr 17, 2008

i have a table with 3740 records in it

i do a query and outer join this table with a query and it produces LESS records = 3733

:confused:

now i always assumed (never assume it makes an "ass" out "u" and "me" !) that the records would be the same as the table you were joining from, obviously i've assumed wrongly, but why?

the query i'm using as my lookup query is grouped and i think that is causing me problems...if i turn it into a table, it works as expected

:confused:

and i check the obvious: no filters or SELECT DISTINCT...

any suggestions/explanations welcome

View 3 Replies View Related

Forms :: Unexpected Data Retrieval In Form

Aug 31, 2014

I have an entry Form which is used to record prospective new members of a society in a Table named 'Foreigners' in a Membership Database using Access 2010. The entry form also records the name of the 'Interest Group' to which the prospective member is initially affiliated.

On entering this Group Name, selected from a drop down list from the Groups Table, The Group ID & Leader Member ID are automatically recorded.

However, I don't wish to record the Leader Member ID, what I wish to record is the Leader's Member Name which is identified by that ID in the related 'Mail List' Table.

In the Properties sheet the relevant source for this field is shown as Leader, but what is displayed is the Leader ID...

View 5 Replies View Related

Queries :: Query With Instr Returns Unexpected Results

Aug 26, 2014

I have Access 2010. If I run this query

Code:
SELECT Reference,
InStr(1,FunctionThatReturnsLongString(), ResponsiblePerson) As MyField
FROM MyTable
WHERE
(Reference ='ShouldBeOut'
OR
Reference = 'ShouldBeIn1'
OR
Reference = 'ShouldBeIn2')

It returns 3 rows, with values in MyField of 0, 23 and 355.

Now I add 1 more where clause to filter on MyField and the query looks like this:

Code:
SELECT Reference,
InStr(1,FunctionThatReturnsLongString(), ResponsiblePerson) As MyField
FROM MyTable
WHERE
(Reference ='ShouldBeOut'
OR
Reference = 'ShouldBeIn1'
OR
Reference = 'ShouldBeIn2')
AND
(
InStr(1,FunctionThatReturnsLongString(), ResponsiblePerson) > 0
)

So, you would think that it should return 2 values (ShouldBeIn1 and 2), but it doesn't. It only return the value where the Instr returns value of 23. The one with the value of 355 also disappears. Why would that be? Surely Instr does not return a byte?

View 10 Replies View Related

Microsoft JET Database Engine Error '80004005' Unspecified Error

Jan 28, 2004

Hi,

Im new to asp and access and have been having this problem for serveral weeks.

Every couple of days, all the asp pages on my site that communicate with the database start having 500 internal errors. i turned off the "Show friendly error messages" and one page gave me this specific error:

Microsoft JET Database Engine error '80004005'

Unspecified error

/admin/submitlogin.asp, line 8

I have tried a million things and have no idea why this is happening. Im not sure what other information i should post in order to see the problem. Any help would be greatly appreciated. Thank you,

Patrick

View 3 Replies View Related

General :: Disk Or Network Error With Error Code 3043

Jul 13, 2012

How I can get rid of Disk or network error with error code 3043? What this error indicates.

View 4 Replies View Related

Simple Error Trapping By Error Code

Dec 6, 2005

hi all

i have the following peice of code ...


Private Sub NextApplication_Click()
On Error GoTo Err_NextApplication_Click
DoCmd.GoToRecord , , acNext

Exit_NextApplication_Click:
Exit Sub

Err_NextApplication_Click:
If Err.Number = 2105 Then
MsgBox "Cannot navigate to the next record. This is the last record."
Else
MsgBox Err.Description
End If

Resume Exit_NextApplication_Click

End Sub


but even when this error occurs nothing is being properly handled the way i specified - any ideas ?

View 3 Replies View Related

Reserved Error (-1517); There Is No Message For This Error.

Mar 31, 2006

Does anybody know what this error message refers to?

"Reserved Error (-1517); there is no message for this error."

It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.

the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)

The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.

If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.


-Thanks, Sean

View 10 Replies View Related

Error 3341 Or Error 3022; Do Or Don't, I'm Damned.

Aug 3, 2006

Okay, I'm kind of stumped here.I have a subform that has a button that sends a user to a "sibling" subform on another tab page, pass some information to ensure they are adding more details to the same records rather than creating two separate record.First time I programmed it, I got an error 3022 (keys cannot have duplicate values). I checked the query of the sibling subform and saw that the ID is from the one side table. I changed it so many table's foreign key is used. Second try, I got an error 3341 (there isn't a matching key in one side table).After some thinking, it also occured to me that I had set the query this way to allow addition of new record which wouldn't be possible if I had the query pulling the many side key, not the one side key.How do I get the subform to accept the ID that is being passed and create a new record using that ID?:confused:

View 5 Replies View Related

Modules & VBA :: Why On Error Is Skipping Next Error In Sequence

Sep 1, 2014

Code:

Private Sub Consolidate_Click()
Dim temp As Variant
Excel.Application.Visible = True
temp = Dir(CurrentProject.Path & "Inputs")
Do While temp <> vbNullString

[Code] ....

From the second iteration its not picking the error.

View 5 Replies View Related

Error Handling - Enough To Put In On Error Event

Sep 24, 2005

Every form has an on error property.

Is it enough for error handling to code the on error property for each form?
With enough I mean error handling which lets you resume the program.

Ontherwise I have to code (or call a procedure) for each coded event which i wouldn't prefer

For instance now I'm putting error handling in each event but would consider it more efficient if it can be placed once in each form
Private Sub cmdReport_Click()
On Error GoTo Err_cmdReport_Click

Dim stDocName As String

stDocName = "rptOfme"
DoCmd.OpenReport stDocName, acPreview

Exit_cmdReport_Click:
Exit Sub

Err_cmdReport_Click:
MsgBox Err.Description
Resume Exit_cmdReport_Click

End Sub

View 3 Replies View Related

Error Message With No Error Number

Feb 1, 2006

Hello All,

I have been developing my database all one seems to be well exept for an error message which is attched.

If anybody can help me trap this error or offer some advice i would be greatfull.

Alastair

View 6 Replies View Related

SQL ERROR - Runtime Error 3061 -

Aug 5, 2005

SQL Issue ...

ERROR: Runtime error 3061 - Too few parameters. Expected 1.

------------------------------------------------------------------------

Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " '
* ROLL * & ' " & " ) AND .... )

sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"

ANY HELP WOULD BE APPRECIATED ...

Cheers,
QTNM

View 14 Replies View Related

(Error 3022)The Changes You.... Error In Subform

Dec 18, 2006

hi guys i was wondering if you can help me this is my code: i have a main form with this code, this form contains a subform linked by the All_PricingID

Set rst = CurrentDb.OpenRecordset("tblAll_Pricing") 'main table
' adding data to the table
rst.AddNew
' Main table
rst!All_PricingID = Me.txtPricingID 'Main table pk
rst!MainContract_ID = Me.cmbMainContract 'combo box in parent form
rst!ItemNumber = Me.txtItem 'Main form text
rst.Update

'sub Table
Set rst2 = CurrentDb.OpenRecordset("tblPricing") 'sub table
For varItem = 0 To Me.lstsubContracts.ListCount - 1 'this is a list in the main form
'--- loop through all the items in the list box and create a new row in the subform for each subcontract in the listbox lstSubcontracts.
rst2.AddNew
rst2!ID = Me.All_PricingID 'sub table foreign key
rst2!SubContractID = Me.lstsubContracts.Column(0, varItem) 'sub table
rst2.Update
Next varItem
'--- close the tables
rst.Close
rst2.Close
Set rst = Nothing
Set rst2 = Nothing


the subform appears correctly with the rows i wanted added but i need the user to be able to edit a column in the subform for the rows just created (my form is on datasheet view). but everytime i move to cursor into the subform, i can't even scroll up and down.

i keep getting an error that says :

The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. (Error 3022)


but when i check my tables tblAll_Pricing and tblPricing , everything is inserted correctly according to my recorset above, do you know why this is happening? and why i am not able to edit my subform. my subform allowsedits and additions.


help!!

View 2 Replies View Related

Error 2465 Application Defined Or Object Defined Error.

Nov 17, 2006

hi,
I am new to this forum and to MS Acess. i am not a software engineer or in the field of software. I had to learn as much as i could about MS Acess because of a project i worked on. I have a standalone MSacess database and one of the forms is giving me trouble when I try to enter a new record

The form is called frm_fragrances and has information about a fragrance.
the frm_fragrances has 4 fields in it and a sub form. the sub form has details about the fragrance

In a new record when I enter the 4 fields and attemt to go to the subform which has details about this fragrance I face this error.

an unexpected error haas occurred @2465: application defined or object defined error.

additional information
Active form:<frm_fragrances>
Active control:<txt_VendorName>
Previous control:<frm_fragrances>@Please call the developer for further instructions



I have looked in the FAQ and on this forum for help on error 2465 and cannot find anything to help me. I can work with forms to an extent but cannot write too much code.

I would really appreciate some help in this matter
Thank you

View 4 Replies View Related

Error #error In MS Access???

Dec 31, 2005

I'm from Vietnam and my English is bad. In my database, I have only a table named tblEmployees, which contains these following fields: Employee_ID (data type: text), Name (text), Salary (number) and Allowance (number). I build a form bound to this table. In the footer of this form, I have a textbox control named txtSumSalary that contains the expression: =Sum([Salary]). Everythings is OK. But when I build an another textbox named txtSumAllowance that contains the expression: =Sum([Allowancess]) (I misspelled this field intentionally), the result are error #error in both textbox controls. I don't understand why the textbox txtSumAllowance wrong, the textbox txtSumSalary is wrong too. Help me!!! Thanks a lot!

View 4 Replies View Related

Error Message - Error No:6;

Jan 21, 2008

Hi. The following message appears when an append query is run in one of my databases "Error No:6; Description: Overflow". I've never seen it before, can't find it in Help - nor anywhere else on the net. All assistance greatly appreciated!

View 2 Replies View Related

Error 438 On Error-handler!

Oct 25, 2004

I have the following code as error handling in a form that gives me Run-time Error 438 "Object doesnt support this property or method" with "Msgbox..." highlighted...
Code:'Error Handling On Error GoTo cmd_icp_catcode_Click_Err'and later in the code' Exitcmd_icp_catcode_Click_Exit: Exit Sub' Error notificationcmd_icp_catcode_Click_Err: MsgBox "An unexpected error hass occurred." _ & vbCrLf & "Procedure: cmd_icp_save_Click" _ & vbCrLf & "Error Number: " & Err.Number _ & vbCrLf & "Error Descricption:" & Err.Descricption _ , vbCritical, "Error" Resume cmd_icp_catcode_Click_Exit
I can provide any more info that you need... I am just surprised because i have used the same code on several forms before and this has never happened!

thanks a lot!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved