Unknown Message Error While Opening A Query

May 23, 2014

When I open a query whether by double click or command button, the following error appears

What does it mean ?? this error appears sometimes not always. I can't figure out what this error refers to, as long as there no any error description or code.

View Replies


ADVERTISEMENT

Forms :: Error Message In Opening Form

Jan 21, 2015

when i want to open the database in an access database i have the following error. you have as the event property setting the expression entered when open.This expression has caused an error amppu (database name) can not find the form that is referred to

View 4 Replies View Related

Reports :: Sending Multiple Email - Unknown Message Recipients

Oct 15, 2013

I have this code below its giving me the RUntime 2295 error. Unknown message recipients. I have check all email addresses and they are fine. Everything else works except when it gets to Outlook and do not send email. I did a Debug Print but didnt understand how to do it.

Private Sub Command9_Click()
Dim rst As DAO.Recordset
Dim strEmailAddress
Set rst = CurrentDb.OpenRecordset("T_Inspectors")
Do Until rst.EOF

[Code] ....

View 2 Replies View Related

Error On SendObject Method - Unknown Recipient

Jul 11, 2013

I ran into this error message with the SendObject method. I'm getting the email address from the "username" environment variable. Our company generally uses the logon ID as the first part of everyone's email address, but there are some users that get this error: "Unknown message recipient; the message was not sent" Not only that, if two sendobjects are used one after the other, sometimes it sends to the first person and then the second one is set up to send a copy back to the sending user, it doesn't recognize the recipient that's logged on and is actually trying to send the email. That's the one that comes from the environment variable. But I've tried hard-coding the recipient and bypassing the variable altogether and it still generates the same error.

View 4 Replies View Related

Error Message For Empty Query

Feb 11, 2008

i have a form which has as button that opens a query
how can i make it so that if there arent any results from the query then a error message will pop up saying "no results found" and the table dosent show?

View 13 Replies View Related

Update Query Error Message

Jul 18, 2006

Trying to create a query that will look up a barcode and subtract 1 from the currnet stock levels, i have the exact same sql statement for the adding of stock part from the -1 to a +1 the relised i may need a gap between the "-" and the 1 but it still comes up with the message. Anyone got an idea how i can make this work??

UPDATE table1 SET table1.quantity = "quantity - 1"
WHERE (((table1.barcode)=[Barcode please]));


Microsoft office access didn't update 1 field due to a type conversion failure, 0 record(s) due to key violation, 0 records due to lock violaation and 0 records due to validation rule violations

View 2 Replies View Related

Error Message For No Results In Parameter Query

Jul 25, 2005

This may be a really dumb question, but those are the easiest to answer right? ;)

Anyway, I have a parameter query where the user enters in certain criteria that it wants to look up. If there are no results that pertain to what a user enters in, is there a way that I can put in an error message that tells them that there are no results? Right now it just goes to a blank form/report/table (depending on what they are searching). I'd like something to pop up telling the user that there is no information cooresponding with what they've typed in.

Thanks.

View 2 Replies View Related

How To Set Up An Error Message If Criteria Is False In A Query ?

Aug 9, 2005

How to display an error message if the specified criteria is false in a query?
what function should be used for that?

I have a query which has to check 3 conditions and if the 3 conditions are true then it should display an error message.

What should be done for that?

View 1 Replies View Related

Unknown Query

Jul 17, 2006

Hi everyone,

I've inherited an access database with a multitude of functions and am trying to make heads or tails of a particular one. I'm wondering if someone can decipher what the results of the following does.

SELECT [table2].ORDER_NO AS Expr1
FROM table1, table2
WHERE (((IsNull([table1]![ORDER_NO]))=-1))
GROUP BY [table2].ORDER_NO
ORDER BY [table].ORDER_NO;

My issue is with the where clause.

The way the DB is used limits my capabilities of running tests. For instance, Table2 is populated only at certain times (batch files insert data into it while processing and then clears it).

That being said. What I get from the where clause is that

- the result of ((IsNull([table1]![ORDER_NO])) must be = -1 as the criteria

I'm just not sure what ((IsNull([table1]![ORDER_NO])) translates to.

Any help would be greatly appreciated,


Tar

View 1 Replies View Related

Modules & VBA :: Error Message When No Data Found In Query?

Jul 18, 2013

I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.

My question is:

Is it possible to have an error message box appear when i click submit and no data is returned by the search query?

I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"

Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).

View 6 Replies View Related

Unknown Problem In My Query

Aug 25, 2004

I am trying to do something like MySQL's LIMIT with access. I'm getting an error that I don't understand with the following query:

SELECT TOP 30 * FROM Entries WHERE Id NOT IN ( SELECT TOP 15 * FROM Entries ORDER BY Id DESC ) AND Static = False AND Authorized = True ORDER BY Id DESC

Any ideas?

View 1 Replies View Related

Error Message '3075' Missing Operator In Query Expression

Dec 3, 2007

Sub PickRandom()
Dim db As DAO.Database
Dim tdf As DAO.TableDef
Dim fld As DAO.Field
Dim rst As DAO.Recordset
Dim strSQL As String
Dim strTableName As String

' 1: Create a new temporary table containing the required fields
strSQL = "SELECT tblWoodrow Odom.ReviewTopic,tblWoodrow Odom.TeamMember1, tblWoodrow Odom.TeamMember2, tblWoodrow Odom.TeamMember3, tblWoodrow Odom.TeamMember 4" & _
"INTO tblTemp " & _
"FROM tblWoodrow Odom;"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL (HERE I RECEIVE AN ERROR MESSAGE. WHAT I NEED TO DO HERE SO IT CAN RUN PROPERLY? ) DO I NEED TO DO A QUERY STRQSQL STATEMENT?)
DoCmd.SetWarnings True

' 2: Add a new field to the new table
Set db = CurrentDb()
Set tdf = db.TableDefs("tblTemp")
Set fld = tdf.CreateField("RandomNumber", dbSingle)
tdf.Fields.Append fld

' 3: Place a random number in the new field for each record
Set rst = db.OpenRecordset("tblTemp", dbOpenTable)
rst.MoveFirst
Do
Randomize
rst.Edit
rst![RandomNumber] = Rnd()
rst.Update
rst.MoveNext
Loop Until rst.EOF
rst.Close
Set rst = Nothing

' 4: Sort the data by the random number and move the top 25 into a new table
strTableName = "tblRandom_" & Format(Date, "ddmmmyyyy")
strSQL = "SELECT TOP 25 tblWoodrow Odom.ReviewTopic,tblWoodrow Odom.TeamMember1, tblWoodrow Odom.TeamMember2, tblWoodrow Odom.TeamMember3, tblWoodrow Odom.TeamMember 4" & _
"INTO " & strTableName & " " & _
"FROM tblTemp " & _
"ORDER BY tblTemp.RandomNumber;"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True

' 5: Delete the temporary table
db.TableDefs.Delete ("tblTemp")
End Sub

View 2 Replies View Related

Modules & VBA :: Opening A Query With Parameters - Data Type Conversion Error

Jun 11, 2013

Here's my Goal: To open a saved query that has a parameter, setting that parameter via a VBA sub.

Here's my Problem: I was getting various errors, but after debugging my program a bit, it comes down to a "Data Type Conversion Error"

Here's my Code:

Set db = CurrentDb
Set qd = db.QueryDefs("qryMY_DATA")
qd.Parameters(0) = Me.txt_ReferenceID
Set rs = qd.OpenRecordset("qryMY_DATA", dbDynaset)

Code:
'*** Database Variables
Dim db As DAO.Database, rs As DAO.Recordset, gq As DAO.QueryDef, prm As DAO.Recordset

I've been all over the forums and tried several different approaches, all to no avail. The Query runs fine in the QDT, but kicks back an error when I try to run it from my sub.

View 10 Replies View Related

Queries :: Append Query - INSERT INTO Statement Contain Unknown Field

Sep 19, 2013

I have two tables each with an ID field (autonumber/PK/No Dup etc).

I want to append two fields from one table to the other table. I have set up an Append Query to do this but it won't work - I get the following error - "The INSERT INTO statement contains the following unknown field: 'FiID'...."

View 2 Replies View Related

General :: Table Opening With Permission Denied Message

Jan 14, 2013

I have a simple log table that I am opening from a button on a form and adding a new record to the table.The table opens bu I get "Permission Denied" as a message - however I can then enter the form and enter data with no problem.why the VBA code cant do the same? what does Permission Denied usually mean?

View 7 Replies View Related

General :: Show Loading Message While Database Is Opening?

Oct 23, 2012

I have a split database with multiple users. Since I split the database, it runs slower than the unsplit version. I understand this happens. I would like to have a message pop up when the database is loading. It takes approx 2 mins to load. Users get impatient and start clicking. So, I wanted to have a message pop up to let them know it is opening.

I have the same problem with forms loading, I have 5 forms and each takes about 4 secs to load, so thought about a loading message there too.

View 14 Replies View Related

Reserved Error (-1517); There Is No Message For This Error.

Mar 31, 2006

Does anybody know what this error message refers to?

"Reserved Error (-1517); there is no message for this error."

It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.

the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)

The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.

If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.


-Thanks, Sean

View 10 Replies View Related

"Overflow" Error Message In Query

Oct 27, 2004

I have a select query that is giving me an error message that simply says "Overflow."

There are several fields that are percent calculations from another query. When I enter a filter such as ">=0.02" in one column at a time, it works perfectly. If I try to get it to use that same criteria on 2 fields at the same time (OR statement), I get the Overflow error and all the data in the query turns to "#Name?"

Any ideas on why the filter will work on one field but not 2 at the same time?

View 2 Replies View Related

Error Message With No Error Number

Feb 1, 2006

Hello All,

I have been developing my database all one seems to be well exept for an error message which is attched.

If anybody can help me trap this error or offer some advice i would be greatfull.

Alastair

View 6 Replies View Related

Error Message

Sep 28, 2005

While going to the design mode of a form, I regularely get the following message :

Microsoft Access can't run the macro or callback function 'fDesign'.

In my Dbase there is no macro with that name.
Can anyone tell me what this messages means and how to get rid of this thing.

Running Win XP, Access 2003 Sp1

View 2 Replies View Related

Error Message

Jan 23, 2006

I have attached a screen print of an error message I recieved on my access database. I finally got it to come up, but only after a few pop up boxes with this error message.

I do know the shared drive it is housed on went on the fritz. So I copied it and pasted it to my desk top. Grrr...I thought this message was due to the flipping shared drive. But now, I recieved it on my desk top too.

Anywho...can someone look at it and tell me what it means.

Thanks alot.

PS, i know my desktop has to much stuff, so don't go there. ;)

View 2 Replies View Related

Error Message

Apr 3, 2006

Hi can anyone help i keep clicking on a qry and it comes up with this message "Syntax error (missing operator) in query expression 'tblSTSLimits.Max Short'. but Max Short is correct can anyone help

View 1 Replies View Related

Error Message

Aug 9, 2006

Hi all,
I face a problem while openning a form.
It gave me this error message:

The expression On Load you entered as the event property setting produced the foolowing error:
User-defined type not defined.

What to do?

Sorry for bothering you.

Thanks & Regards

Mark K.

View 3 Replies View Related

Error Message

Aug 23, 2006

I get an error message when I open access 2003 database "database contains a missing or broken reference to the cacview.ocx version 1.0

All help so far says to go to tools>references.
My tools in the help menu does not have references
anysuggestions

View 1 Replies View Related

ERROR Message! Please Help

Oct 9, 2006

I have a table that keeps crashing. The only error message I get is "Invalid Argument". Each time, a single record will turn into "#Error". Each field says this in the row. When this happens, Access won't let me delete just that row,

Any ideas how to delete them?

View 2 Replies View Related

Error Message

Jul 11, 2005

I am getting the following message:

"you tried to execute a query that does not include the specified expression qryMaxDays.Days Between 0 and 50 as part of an aggregate function."

I have other queries just like this and they run with no problem. any ideas? :confused:

SELECT Count(qryMaxDays.Days) AS [Number Of], qryMaxDays.Days
FROM qryMaxDays
GROUP BY qryMaxDays.Days
HAVING (((qryMaxDays.Days) Between 0 And 50));

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved