Update Command
May 5, 2006
I have searched and am unable to find the solution, so if it's posted already, I am sorry.
but the problem is that I am trying to use a cmd button on one form to only open certain records from the main form. No problem, except on the main form I have another cmd button that updates from one field to another. What I am trying to accomplish is when I hit the first cmd button to open my main form with the filters on and automatically run the update cmd.
I have already tried putting in the update code that works otherwise works fine, just can't seem to get it to update on it's own.
thanks for any help.
View Replies
ADVERTISEMENT
Sep 27, 2006
hi guys i have a main form with a subform. i have created an add command button to add rows in the subform. (it could only add when the record count is less than 3). here is my code
If Me.SubFormName.Form.RecordsetClone.RecordCount >= 3 then
Msgbox " You can only add three"
cancel=true ' cancel event
me.SubFormName.Form.FieldName.SetFocus ' Set the focus to the field
exit sub
End if
i get no errors, However my problem is that it puts the focus on the begginning of the subform, i wanted to go to the end of the subform or new row... right now i have to go mannually until the last row... is there anyway to put the focus on the last row?
:rolleyes:
View 4 Replies
View Related
Nov 3, 2006
Hi,
I try to execute an update command i.e.:
UPDATE Results set Data = 'Heiner's key' where ValidationNumber = 1 and TestNumber = 2 and Line = 'E1'.
Access does not let me do this because the “'” in Heiner's terminates the update string prematurely.
Does anyone have a suggestion how to do this? Thank you.
View 4 Replies
View Related
Aug 10, 2013
I am writing a sql to assign students to each section of a course. The first student would be in the first section and the second student in the second section.
The ClassParam table gives the number of sections for the course and the last period that was assigned.
The Classes table gives the class key number by class name and section number.
The student has the name of class they want to take and I want to move the class section number into the Choice1 field.
The IIF statement seems to work but all of the students are getting the 1st session of the class put into the choice1 field.
UPDATE Students, ClassParam, Classes SET Students.Choice1 = Classes.ClassID,
ClassParam.PeriodAssigned = IIf([ClassParam]![PeriodAssigned]>=[ClassParam]![NumOfSections],1,
[ClassParam]![PeriodAssigned]+1)
WHERE ((([Students]![FirstChoice])=[Classes].[ClassName] And ([Students]![FirstChoice]) Is Not Null And ([Students]![FirstChoice])<>"") AND (([ClassParam]![PeriodAssigned])=[Classes].[SectionNumber]) AND (([Classes]![ClassName])=[ClassParam].[ClassName]) AND ((ClassParam.ClassName)=[Students]![FirstChoice]));
View 2 Replies
View Related
Dec 31, 2013
I want to be able to update a date field in my form with a command button based off the date the person picks off a combo box in my header... is this possible?
View 1 Replies
View Related
Dec 12, 2012
I am setting up a "to_do" list in access. One of the field is the date the task was last completed. I want a button to update that date to the current date for the record that i am viewing on the form. Below is the code that I am using. When I click on my button, it updates the first record in my to-do table but not the current record displayed in my form.
Private Sub Cmd_Update_Click()
Dim DB As Database
Dim rs As Recordset
Dim i As Long
On Error GoTo Command4_Click_Error
Set DB = CurrentDb
[Code] ....
View 3 Replies
View Related
Dec 14, 2012
I am on Access 2007, and know very basic stuffs to create tables, queries, and form search. I have just successfully completed a search form filtered with a combobox. Also I have a built-in subform within the main form to display other results as well. The display results are based on one complex query (relational query). Now I need to add a command button that would take me to another form to update the current record found.Quick on the design:
- When I search a subject in a main form(subject lists in the combobox), it would populate results below in the main form and also subform would populate other results as well.
1. Add a command button so can take me to new form, but would need to have the current record populated.
2. Once updated, then how do I save it?
View 13 Replies
View Related
Jul 7, 2014
Is it possible to use a command button (update) to update matching records in a form (Test)? I have a file (april.xlsx) in which the first column Cytogenetics ID (14-xxxx) is a unique identifier that matches a record in the database. The next column Result (NL-F, NL-M, F-VUS, M-VUS, A-M, A-F) and the date column next to it are what need to be updated in that record. In the database there is a field called Result that needs to be updated with
the text from column 2:
NL-F and NL-M = Normal
VUS-F and VUS-M = Variant of Unknown Sig.
A-M and A-F = Abnormal
There is also a Final TAT Date field in the database that needs to be updated with column 3 in the spreadsheet (Final TAT Date).So basically when there is a match with column 1 in april.txt to a record in the database, the Result field in the database is updated with column 2 of april.txt and the Final TAT Date field in the database is updated with column 3 of april.txt.
Cytogenetics ID Result Final TAT Date
14-0390 Normal 4/11/2014
14-0396 Variant of Unknown Sig 4/18/2014
View 1 Replies
View Related
Nov 24, 2014
what is the correct syntax to write a command line able to UPDATE more than one field in the table records having multiple WHERE criteria.
Here is my challenge:My TableI has the columns A, B, C and D which are populated, for example, as follows:
TableI
A B C D
1 2
2 6 4 3
1 7 5 9
1 2
2 5 8 5
etc.
I also have a FormII which updates TableII. Among the existing fields of TableII there are the fields C and D (same as above). When saving data entry thru the save button of the FormII, fields C and D will be naturally saved on the TableII. Well, I also want C and D info updated into Table I as well, but only when field A=1 and B=2.So what I need (for the click event of the button save in the FormII) is to open TableI and either insert or update it with the values of the fields C and D in every record WHERE A=1 AND B=2.For instance, assuming C=& and D=%, the desired result should be as follows:
TableI
A B C D
1 2 & %
2 6 4 3
1 7 5 9
1 2 & %
2 5 8 5
I did not find any examples in the net including multiple criteria..Here is what I wrote unsuccesfully:
Private Sub BtSalvarFrmII_Click()
CurrentDb.execute "UPDATE TableI"
Set FieldC = Forms!FrmII!FieldC.value AND Set FieldD = Forms!FrmII!FieldD.value WHERE FieldA = 1 AND FieldB = 2
Docmd.save
Docmd.close
End Sub
What would be the correct syntax?
View 7 Replies
View Related
Dec 17, 2013
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies
View Related
Apr 13, 2013
My membership database has worked fine until recently. Now I cannot save inserted data. On attempted saving "Update or CancelUpdate without AddNew or Edit" appears.
The problem. relates to 2 tables Member and Addresses. PK in the parent table Member is ID. In the Addresses Table the FK is ID. There is a One to One relation between the tables and Referential Integrity is set. I know 1 to 1 is not good but it worked fine in this small database.
Browsing the all of the existing records is fine.
View 9 Replies
View Related
Jun 28, 2005
Hi Guys,
I have got a query that updates details from one table2 to table1, "Reference" is the primary key and this is what the query uses to determine which need updating.
It all works great but if table2 contains a record in "Reference" that is not in table1 i just want it to ignore it, currently it just seeems to add them.
Any suggestion guys & gals?
Many thanks
Tim
View 9 Replies
View Related
Nov 29, 2006
Ok, i have a question about update queries.I have two tables (I'll call table 1 and table two for simplicity) and an update query. I want to get some data from table one to table two (via an update query). But in table two there is a field that isn't in table one but i want to add a value to that field via the query.My question is, can i manually put into the query what data to add to a field instead of/aswell as using data from other tables.I hope you understood my questions.Cheers
View 3 Replies
View Related
Nov 3, 2013
I get an error "update or cancel update without add new or edit" which seems to point to this code.I am using MS Access 2010.
Code:
Private Sub Form_BeforeUpdate(Cancel As Integer)
'Store when record was last modified and by who.
'Initially stores when the record was entered.
If Me.NewRecord = True Then Exit Sub 'Exit if new record
Me.DateLastModified.Value = Now()
Me.LastModifiedBy.Value = getUser()
End Sub
View 2 Replies
View Related
Mar 30, 2006
I am trying to stop access displaying the "You are about Update 1 Record" etc message when i run an update query. I know i can do this in Tools/Options screen but the problem is that the database is going to be used by multiple users, and rather than changing each persons Action query option I was wondering whether there is something i can put in to the code Globally to halt the message.
Any help would be appreciated.
Regards
Mark
View 2 Replies
View Related
Feb 10, 2008
I am trying to remove random characters from a field. The field [assycode] contains a string similar to say, FGEJBF1 or ABFGYRUKC I want to remove any occurrence of "F1" normally at the end of the string but not always at the end. I used: Like "*f1*" to find the correct records, that worked fine, I then used [Assycode]-" f1" in the update to box, It wants to update 146 records I click ok then it says It couldn't due to a type conversion error. Just messing around I tried adding "F1" to these records using [Assycode]+" f1" and it worked fine. Can anyone point me in the right direction?
Thanks in advance
Wayne
View 5 Replies
View Related
Oct 3, 2007
I have a database where two tables contain information that I need to update based on the 4 right most digits of a field. There are only 11 values that will need to be updated out of a large list of values. I'm not quite sure how to set up the update query so that I can do this.
View 1 Replies
View Related
Sep 18, 2006
Hi,
I have a question,
I made a Macros called AutoExec to run "beginning" Function
Function beginning()
If len(Command)>0 then
....................
End if
End Function
But, it has "compile error: Can't find project or library"
Why?
What's wrong with it?
Thanks.
View 2 Replies
View Related
Feb 28, 2006
hi,
i need serious help with my access project...
im designing a database for videoshop for loans in access. i have got my movies and loans tables (along with others) and have got them as a one to many (loans to movies) and have got Rental ID as Primary key in Loans table and got that linked to Rental ID# in movies table.
i want some sort of command in the loans form so that when a customer loans out a movie it will update the movies table (rented out field).
the fields that i have got in the loans table are:
Rental ID
Customer ID#
Movie Rented Out
Date Rented Out
Other Rental Details
Rental Duration
Daily Fine Rate
the fields in the movies table are:
Movie Title
Movie Quantity
Movie Description
Genres
Rating
Director
Popularity
Rented Out
In Stock
Supplier ID#
Rental ID#
Stores ID#
if anyone whos reading this knows how i can do this then it will be highly appreciated if u replied to this thread.
thankssssssssssssssssss.....
adeel.
View 1 Replies
View Related
Aug 22, 2013
I have a table called tblCompanies. When a company acquires another company, I need a method by which the acquired company's CompanyID (PK) can be updated to the new company's CompanyID (PK). I also need to be able to update all related CompanyIDs (FKs) to the new value in related tables.
In cases in which the new company does not have an existing record, there is no problem: the company name simply gets changed to the new company and the existing CompanyID is maintained. I then use an audit table and Track Changes function to keep track of the company name data and a union query to keep the old names in the selection lists.
The problem is when both companies already have existing records in the table.
So, let's say I have records for Company A and Company B. Company A merges with Company B and Company B is now the main record. What is the best, simplest and easiest way to update the CompanyID (PK) from A to B and change the CompanyID (FK) to the new value in all related tables?
I am envisioning a pop-up form that directs the user to select the new company and then an update query happens behind the scenes... but exactly how does the criteria for the update query get selected and how do all the related tables get updated? My vba skills are pretty basic, will I need extensive coding to do something like this?
View 6 Replies
View Related
Apr 20, 2006
I have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously)
Closed is a yes/no field in my Order table
OrderID is the primarykey of the table Order
SelectedOrderID is the drop down box.
Any help would be greatly appreciated!
View 3 Replies
View Related
Apr 26, 2005
I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
View 11 Replies
View Related
Apr 28, 2005
how can i assign a formula to a command button?
also can anyone give me specific advice about calucalating the % of check boxes ticked across multiple records.
thanks in advance
View 4 Replies
View Related
May 25, 2005
A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click()
' Save the main record if it has not been saved.
If Me.Dirty Then
DoCmd.RunCommand acCmdSave
Me.Recalc
End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then
Dim SQL As String
' Move main record to Grants Activity Archive.
SQL = "Insert into [Grants Activity Archive]" & _
" select * from [Grants] where [New ID]=" '" & Me.ID & "'"
CurrentDb.Execute SQL
Me.Recalc
End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.
View 4 Replies
View Related
Mar 7, 2006
I have a find command button that appears to call the find and replace message box. It should be a search for anything in my query. The code behind the button looks like the find and replace message box in the office suite. I believe I am trying to create a message box where you add an entry and it searches then lauches a subform with my entries.
When I checked the button it had the following code:
Private Sub cmdFind_Click()
On Error GoTo Err_cmdFind_Click
Screen.PreviousControl.SetFocus
DoCmd.DoMenuItem acFormBar, acEditMenu, 10, , acMenuVer70
Exit_cmdFind_Click:
Exit Sub
Err_cmdFind_Click:
MsgBox Err.Description
Resume Exit_cmdFind_Click
End Sub
I read a few of the lookup queries but they only give me a drop down. Is there some way to customize the box comes up without altering all of Office or do I just sound lost.
View 1 Replies
View Related
Mar 24, 2006
I am a newbie at Access and I am currently learning it for my job...I have a database going and I am wanting to do two things and I can not figure it out for the life of me.
Little background, the database I made is a continuous form. I am wanting a command button that when pushed will put it in data entry mode, and when pressed again will put back in a 'view all' state. I know it is a simple If Then, but I don't know VBA very well =
Other thing, is I wanting to be able have button that when pressed will output to an excel sheet, right now I have it when it is pressed it asks me what kind of format I want outputted, and I want it automated to just go straight to excel.
Any help would be appreciated, thanks.
View 3 Replies
View Related
