I have an update query built that checks to see if a date is entered for when a document is mailed as well as a date for when that document was received.
I'm trying to setup this query to check and ensure that if multiple documents (Form8) were mailed that each one was marked as having a received date before the Update query add's a "Graduated" mark to the student. Screenshots are attached.
Anyone have any idea on how I can set this up?
Basically the tblFormEight can have multiple entries assocaited with each EnrollmentID (aka Student enrolled in a class) which represents multiple Form's set out in the mail. I don't want this Update query to run unless all entries for each EnrollmentID have Received Dates.
Ok, i have a question about update queries.I have two tables (I'll call table 1 and table two for simplicity) and an update query. I want to get some data from table one to table two (via an update query). But in table two there is a field that isn't in table one but i want to add a value to that field via the query.My question is, can i manually put into the query what data to add to a field instead of/aswell as using data from other tables.I hope you understood my questions.Cheers
What I want to do is from several records find the Max() date and update that one record with my stuff. However, I get an error message cannot use aggregate in update query or something to do that effect. Is there a way to get around this?
Hello, i was wondering if you could help. I want to run an update query, taht updates prices in a table. But i would like to be able to choose the criteria when the query runs, for example a message box appears, that will allow me to enter a certain amount for the prices to change by. Could someone guide me on how to do this? thankyou, its much appreciated
hi all, I'm newbie here. please forgive me if I make mistake / wrong "room"
here what I need. I want to make update query in access 2000/2003. let say I want to update field "COST" to "0", which have condition field "ID" is 070.... (070. and something). the matter is type of field ID is numeric not string, so I can't use LIKE function. any suggest what I can do without change data type for field "ID" for permanent (I mean, if we can change data type for temporary with code, and turn it back with code too, that's no problem). I don't care, either use macro or update query (if update query can't do this task). thanks before
Was wondering if there is a way without building individual update queries, to update info in one field that has multiple criteria ?
Basically I need to change/update daily multiple ID numbers to new ID numbers, long story on why this needs to be done but for now I need to do it this way.
Example: 12345 update to ABCDE, 6789 update to FGHI, etc. These ID's are all within the same field in the table.
It works fine running each ID one at a time but was wondering if it is possible to do all these updates within one query or code ?
Table: TaskT Fields include; Description, Action, DueDate, Priority, Precinct, Recurring and Employee. Query: TaskQ Form: TaskF and TasklistF
The forms are fed by the TaskQ query.I have sort and filter on all fields except date field which i would like to have 3 buttons which will dynamically update the criteria in the TaskQ DueDate field. Is that possible or the way to do it??
The buttons would include 'Due today' 'Overdue' 'Next 7 days' and they update the criteria in the TaskQ query and hence filter with the following;
I have a form that run a query to select all the students taught by a given faculty member. Once the records are loaded, the faculty enters attendance data, selects a date from a combo box and hits a save button.I change my relationship and now need to be able to store the key for the field in the combobox and not the text.
How do I set the field, table and criteria in the update query to do this. The UD query uses the FacultyStudents query as its record source. Currently the FacultyStudents querry does not have the Key or the date fields since the date is selected by the faculty once their records are loaded. As I see it there is now way to make a join, so I think I either need VBA or SQL, which I am not very good (really bad) at wriitng. Can the necessary Sql be written in the query design view?
I need to update the periodtype field in my table depending on different values in the field Formtype- I am looking to do this without having to use VBA. I have the following fields in a table - I want to update the value of the field Period_type as follows -
When Formtype is 10-Q, update Periodtype to "Quarterly"
When Formtype is 10-K, update Periodtype to "Annual"
The current value of Periodtype for both formtypes is "Semiannual"
I'm trying to update a record in a table, from a query that is run as part of an event from a command button on a form.
I have a table called 'Assets', a table called 'Disposals', and a form called 'Disposal Entry'. I would like the user to select an Asset ID from a combobox on the form, then when the button is clicked it adds a record to the 'Disposals' table, and updates the Status for that specific Asset in the 'Assets' table to "Disposed".
It adds to the Disposal table fine, but I can't get it to update the Asset table.
My query looks like: Field: Status Asset ID Table: Assets Assets Update To: "Disposed" Criteria: [Forms]![Disposals Entry]![Asset ID]
I've checked the spelling and everything looks ok.
The [Asset ID] control on the form is bound to the Assets table. If I edit the control and clear out what is in Control Source, then it updates the table and works fine.
However, I want to keep it bound as I have a subform on my home page showing the latest disposals.
How I can get the query to use the Asset ID on the form as the Criteria?
I have 2 tables that must be involved in this query. Both have the same fields; one is a temporary table created from an Excel import which will be deleted later, the other is the permanent table.
tblStoreProducts is the permanent table. It has a 2-field Unique index; there can only be 1 of any ProductKey for a StoreKey (there can be multiple ProductKeys within a StoreKey, and multiple StoreKeys for each product, but there can only be 1 entry for each unique combination of ProductKey/StoreKey).
tblImportToStoreProducts is the temporary table. It holds all of the ProductKeys for one StoreKey.
My query needs to identify any ProductKey in the tblStoreProducts that does not exist in the tblImportToStoreProducts for that StoreKey, and then it must set the MaxUnits field to 0.
Basically, the temporary table is this years' inventory for a particular store. If a product was in that store last year but it isn't there this year, the quantity must be set to 0 because the ultimate aim is reporting hazardous materials.
I have an update query for tGLCashAccount where it adds a value from another table with the BeginningBalance to arrive at CurrentBalance.
Here's what it looks like in design view:
Field: CurrentBalance Table: tGLCashAcct Update to: [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
Here is SQL code: UPDATE tGLCashAcct, tMakeNewCashBal SET tGLCashAcct.CurrentBalance = [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance] WHERE (((tGLCashAcct.GLCashAcctID)="102"));
I get the error: data type mismatch in criteria expression when I run it.
Where the field contains "AB", I want to replace the data with say "AB - Alpha Beta". But I do not want to change any of the other data. So the outcome should look like:
AB - Alpha Beta, AC AB - Alpha Beta AC AB - Alpha Beta, AD AA, AB - Alpha Beta
I'd then go on to change AC to say "AC - Alpha Charlie".
I have another update query that is basically looking at all of the Enrollment ID's that are associated with a ClassID. If each EnrollmendID has a Graduation date and the Graduated check = yes, then I want to place the current date in the Closed Date field for the Class.
I can get a select Query that shows all of the classes and all of the EnrollmentID's but I'm not sure how to tell the query, "For Each ClassID, If All EnrollmentID's have a Graduated Date and Graduated = Yes, Then Class Closed Date = Date()"
I have set up a database that stores actions (i.e jobs). In the table; two of the fields are...'required completion date' and 'actual completion date'. I wish to lookup, by using a query, all of the open actions (those which havent yet been complete (i.e the 'actual completion date' is null)) and then later on all those which are overdue (i.e the 'actual completion date' is null And the 'required completion date' <today....this being the criteria for an overdue action).
However, I have used a form which has a combo box which contains the values open and overdue. When a selection has been made I want a form to display with the results depending on the selection that has been made. I am capable of creating a form based on a query, but am unsure of how to construct the query with the correct criteria based on the option that is selected from the form.
I Have a forms which brings up a record in textboxes when you hit a search Button using a value that you type into a Textbox called BarTxt. My problem is that this value may not be unique. Therefore I'm trying to find and update the table using 2 values from the table (Barcode and PurchaseOrder).I have entered the code
Code:
Private Sub SearchBtn_Click() PNTxt = DLookup("PartNumber", "BookInTable", "BarCode ='" & [BarTxt] & "'" And "PurchaseOrder ='" & [POTxt] & "'") End Sub
This however is just bringing up a Type mismatch error. Even though both are text fields.Also even if I just use Barcode to search which works. My update Code
Code:
DoCmd.RunSQL "Update BookInTable SET DateBookedOut = '" & Me!DateTxt & "' WHERE BarCode ='" & [BarTxt] & "'" AND PurchaseOrder ='" & [POTxt] &
I get an Compile error saying "expected expression".
I have data for hundreds of stores. The data was pulled for the top 15 items by store, so I cannot obtain only the top 5 items that I need. How can I query this data to extract only the top (or bottom) 5 Subjects, by store, based on the percentage column?
I have a form, which i use to book in products received. What i want to do is if the quantity received is equal to what was ordered then i'd like to update a yes/no field (Order Complete) on a separate table to true.
I have got a query that updates details from one table2 to table1, "Reference" is the primary key and this is what the query uses to determine which need updating.
It all works great but if table2 contains a record in "Reference" that is not in table1 i just want it to ignore it, currently it just seeems to add them.
I am trying to remove random characters from a field. The field [assycode] contains a string similar to say, FGEJBF1 or ABFGYRUKC I want to remove any occurrence of "F1" normally at the end of the string but not always at the end. I used: Like "*f1*" to find the correct records, that worked fine, I then used [Assycode]-" f1" in the update to box, It wants to update 146 records I click ok then it says It couldn't due to a type conversion error. Just messing around I tried adding "F1" to these records using [Assycode]+" f1" and it worked fine. Can anyone point me in the right direction?
I have a database where two tables contain information that I need to update based on the 4 right most digits of a field. There are only 11 values that will need to be updated out of a large list of values. I'm not quite sure how to set up the update query so that I can do this.
I have a table that has banking information in it (downloaded from the internet). I have a category field (lookup field) that I have to update manually so, for example, every time the electric bill is paid I have to click it and change the category to "electricity".
I want to set up a table with phrases for access to search for and a category to change to. For example if the banking table has "VIS ELECTRICITY 20812/773474868" and my search criteria table says anything with the word "electricity" should have category of "electricity", then I want Access to update the banking table based on that.
There will be several items in the search criteria table so Access will have to read through all of them to find the correct one. Is this possible?
