Does anyone know why I get the error "Operation must use an updateable query" when I run this query.
UPDATE Food_Table SET Food_Table.Delivery_Size = (SELECT Delivery_Size FROM Delivery_Table WHERE ((Delivery_Table.Region=Forms.Formulation_Combo.Re gion_Combo) AND (Delivery_Table.SubRegion=Forms.Formulation_Combo. SubRegion_Combo) AND (Delivery_Table.Segment=Forms.Formulation_Combo.Se gment_Combo) AND (Delivery_Table.Sector=Forms.Formulation_Combo.Sec tor_Combo) AND (Delivery_Table.Product=Forms.Formulation_Combo.Pr oduct_Combo)));
When I run only the sub SELECT query portion all is well, but not in the update query.
Trying to create a query that will look up a barcode and subtract 1 from the currnet stock levels, i have the exact same sql statement for the adding of stock part from the -1 to a +1 the relised i may need a gap between the "-" and the 1 but it still comes up with the message. Anyone got an idea how i can make this work??
UPDATE table1 SET table1.quantity = "quantity - 1" WHERE (((table1.barcode)=[Barcode please]));
Microsoft office access didn't update 1 field due to a type conversion failure, 0 record(s) due to key violation, 0 records due to lock violaation and 0 records due to validation rule violations
I'm trying to write an UPDATE line in VBA, but whenever I put the table name I get an "Expected End of Statement" error.This is line currently;
Code: strSQL = UPDATE "MASTER PLANNER" SET [SET 2] = TRUE WHERE "[ID] = " & Me.PlannerID
It doesn't matter whether I change the table name to square brackets, quotes or nothing at all, it always gives me the expected end of statement error.
I am trying to create an update query. I am trying to update a field in a table with the current date as a request.
I have a table named tblTest and a field named Date2 that I am trying to update with the current date, the button that the VBA is applied to is in a form name frmTest. This is my code:
Private Sub Command39_Click() Dim t1 As Date t1 = Date db.Execute("update tblTest set tblTest.Date2") = t1 End Sub
But when I press the button I get: Run time error '424' Object Required
I have two identical tables with one being created by coping the structure of the other. Table A is my primary table. Table B is my new data imported table. I created a Update query with a dlookup to update Table A's address field from Table B. All records fail to append due to type conversions.
Here is the dlookup: DLookUp("[Address]","Table_B","[ID_number] = " & [ID_number])
I need this to work and I have no idea why I am getting the conversion problem.
I have a text column of alpha-numeric fields and some start P123456, P111111, P222222 etc. I want to remove the P from these fields.
I thought the following update query would do this but gives a type conversion error, regardless if the new column to copy them to is type text or number. Can someone help explain what is wrong.
UPDATE 2006 SET D2 = CLng(RIGHT(D1,LEN(D1-1))) WHERE LEFT(D1,1)="P";
I am trying to get some of my colleagues to open a database I have created. They keep getting an error message on some of my forms:
"The expression after update you entered as the event property setting produced the following error – can’t find project or library Expression may not result in the name of a macro, the name of a user defined function, or event procedure There may have been an error evaluating an event, function or macro."
What does this mean? I'm assuming it has osmething to do with the code I have in AfterUpdate events but these are only requerys for cascading combos. Example:
Private Sub cboBusiness_AfterUpdate() Me.cboBusinessUnit.Requery Me.cboBusinessUnit.SetFocus End Sub
Where do I need to look to sort this? It works fine on my PC, but nobody elses.
Set rstSimple = cnnSimple.Execute("SELECT sponser2 FROM data2")
Do While Not rstSimple.EOF spo=rstSimple.Fields("sponser2").Value set tamt = cnnsimple.Execute("SELECT SUM(amount1) FROM data1 WHERE sponser1='"&spo&"' ") Set rstSimple1 = cnnSimple.Execute("UPDATE data2 SET amount2= "&tamt(0)&" WHERE sponser2='"&spo&"' ") rstSimple.MoveNext Loop
UPDATE DISTINCTROW indicateur set libelle_court='% revues tenues / revues prévues sur projet', description='',cle_tri='',id_priodicite=1,calcule= '0',resitute='0',origine='',seuil_min=9,52,seuil_m ax=1 WHERE id=2;
This gives me an error...I found out that if I put 9,00 (this is the symbolic representation of 9.00 in French system) then it works fine. It does not take any thing after the decimal...
I have a database with 10 users accessing it. Even though the database is in share mode they get this message "Error 3218 Could not update; currently locked." when they are trying to write a new record.
Out IT department updated to SP2 this weekend and about half of my reports are no longer working. I cannot view, print or go into design mode. The error I am receiving is this:
There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable.
As soon as I change my default printer to a different one everything works normally. After talking to our IT department I received the helpful reply:
"Not at this time . This would take a lot of research to see why some reports print vs this one that will not."
After about three minutes of checking all of the affected reports are pointing to one printer. I found a way to manually fix an individual report by opening it up with a new printer set as default, saving the report and then changing the default back to the original printer. The problem is volume, this appears to be affecting about 50 or so reports.
It seems like a driver or network issue, these are network printers, but I do no have the access rights to try and fix this.
I am running a access db within a company with about 40 users. I have split the db for multiple users. The only way I have found to fix this problem is to ask the user to close it and reopen it but this is just a quick fix.
Is this cause by our Microsoft servers or is it cause by access. Any help would be great :D
Here is the complet error msg
Could not update; currently locked by user "Admin" on machine 'XXXXXX'
please note that the user is not logged on as "Admin" but as normally user without admin rights.
If anymore info is required please tell me, but basically i can insert into the database no problems , but when it comes to updating what is in there i recieve the above error
Using Access XP, I have a number of unbound combo boxes I use as search tools to locate specific records. Here is the code for one of them:
Private Sub Combo40_AfterUpdate() Me.JobNumber.SetFocus If Not IsNull(Me.Combo40) Then DoCmd.FindRecord Me.Combo40 End If End Sub
I think I need to add something along the lines of:
Me.Combo40.SetFocus Me.Combo40.Text = ""
To get it to clear the combo box after the FindRecord has executed. However, when I drop those 2 lines in either before or after the "End If", I get this:
"RunTime Error: 2115. The Macro or Function set to the BeforeUpdate Validation rule property for this field is preventing MS Access from saving the data in the field."
So, I hope this doesn't mean that you can't clear the combo box choice because it interferes with the FindRecord part of the code...Anyone know how to get the result I'm looking for? To define it clearly: I want the combo box selection area to clear the choice after the find record has succesfully completed. I don't want to clear the choices, just not show anything after a search completes.
Thanks in advance. I'm sure this one isn't that hard, but it is eluding me and I've only been doing access for about 3 months.
I got a problem, I have a calculated field which is sometimes empty due to no information being put there. Here is what I have in the afterupdate code:
FUTURE DATE = Me.Box123
The Box123 is my textbox and the FUTURE DATE is the datasource field.
When the field is blank I get the following error message:
I get a Run-Time Error "2113"; and the message "The value you entered isn't valid for this field"
I have 2 tables called MakeTable1 and DBO_TBL_Activity
Im trying to update MakeTable1 with the values from TBL_Activity when both activity.StartDate and maketable1.Dates match but also acticity.IDStaff and Maketable1.ID Match
Below is the SQL i have so far
Code:
UPDATE [MakeTable1].[Detailsa] SET [dbo_tbl_activity].[details]
WHERE [MakeTable1.Dates)=[dbo_tbl_activity].[StartDate] AND [MakeTable1].[id]=[dbo_tbl_activity].[idstaff]);