I have a query (SelectedData_Query) , on which a form (SelectedDataQuery_SubForm) in datasheetview is based, which is placed on a form (NAWInvoerForm) where customer adress data is put in. When someone clicks new case button on the NAWInvoer_Form, another form (CaseDateTimeInfo_Form) is opened, data is entered, but when the "CaseDateTimeInfo_Form" form is closed, the data in the subform in datasheetview on the NAWInvoerForm is not yet refreshed. So I tried the following:
Private Sub Form_Close()
'------------------------------------------------------------
' RefreshNAWInvoerForm
'
'------------------------------------------------------------
On Error GoTo RefreshNAWInvoerForm_Err
Which works just fine. After the form is closed, the name, adress and cases overview form is reopened and refreshed, thus the case that has just been created is shown nicely in the subform which is based on a query.
But it is starting to become bothersome, sometimes when I close the form in which I create a new case, I don't want to have the other form (NAWInvoerForm) reopening again.
So how can i make it so that when I close the form only the data in the "NAWInvoer_Form" is refreshed, without having to reopen the form again. I mean, in the background, the form is still open anyway. It just shouldn't keep popping up everytime.
It can't be hard, but I can't see it. I'm new at this. I have found some similar topics on this forum, but none which helps me out enough.
It should be something like:
On "thisandthatevent" do a "thisandthatcommand" on "thisandthatsubform" in "thisandthatform"
If I know how the syntax of that is done, it would help me out with some other problems I see coming in the near future. I've looked at, and tried some things based on this link: http://www.mvps.org/access/forms/frm0031.htm
But without success.
I have a small issue with the before update event, it is triggered for every record of my subform in datasheet view rather than just once when the user leaves the subform.
I have a module which is called from my form and all the subforms. It tells the user that changes have been made to the record and gives them the option to undo. This is to prevent accidental editing when viewing records. This works fine, but sometimes the user must enter a number of records in a subform and so they must answer the message box every time.
Is there any relatively straightforward way to accomplish the warning and undo when the user leaves the subform rather than the individual record in it?
A quick attempt at lost focus and before exit demonstrated that these were not the way to go.
For reference, here is the before update code and the module
Option Compare Database Option Explicit
Private Sub Form_Before Update(Cancel As Integer) On Error GoTo Err_Handler
Public Sub Confirm_Change() On Error GoTo Err_Handler
Dim Msg, Style, Title, Response
Beep
'Define message box Msg = "You have made changes to this record. " & Chr(13) _ & Chr(13) & "Click 'Yes' to save changes " & Chr(13) _ & Chr(13) & "Click 'No' to undo changes " Style = vbYesNo + vbExclamation + vbDefaultButton1 Title = "Record changed - Confirm save" '
'Check which button pressed Response = MsgBox(Msg, Style, Title) If Response = vbYes Then MsgBox "Record has been updated with your changes", vbOKOnly, "Record saved" Else DoCmd.RunCommand acCmdUndo End If
May be this is easy for your guys. I want to freeze or lock the mainform data fields while allowing users to input, edit, delete data on a subform. I tried to change mainform properties so it can not edit, add or delete data on mainform. By doing so, I cannot do anything with subform, it seem read only as well.
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
I have recently added a subform to a form and wish to display the subform in Datasheet view. Whilst I can get the proper data and headings to display, I cannot figure out how to get the column widths to persist. I can adjust the column widths while in (main) form view right on the subfirm columns themselves but after I save and reload the main & subform form, the widths revert to some sort of default value.
I have also tried adjusting the columns in the subform's associated data table itself as well as adjusting the text box widths when the subform is displayed in Form view but it does not affect the column widths when the subform displays Datasheet view.
What is more annoying is that I have another subform in which I was able to make the Datasheet view column widths persist but I don't seem to be able to properly recall how I did it.
Well, I couldn't find this using the search, so here it goes:I have a form in which I enter data to create a new client. Within that form I have a subform in datasheetview which is based on a query which holds/retrieves certain (important) fields from a table that holds case info. So in that one view the client data is displayed on the form and all cases and the most important data from those cases is displayed nicely in one screen.Now, when a client calls I navigate to that client and see all previous and all current cases that are open and/or closed for this customer. So the customer says case this and that number is the case I need to discuss with you. Now, what I would like is to be able to click or double click anywhere on the line that, for instance, says case nr 55, so that the form(s) belonging to case nr 55 pop up and all info concerning that case is displayed and can be edited as needed. My problem is: I'm still a newbie and if it was a simple thing like using the on_click event to open the form that's needed, I would not have to post this question. But that can't be done (as far as I know) since the subform is based on a query which is displayed in dataview.Am I overlooking a very simple solution to this problem or is it really going to be as difficult as I think it's going to be?For clarification of the idea I have included a screenshot of the form in question. I assume there are tons of databases out there which use such a layout or idea as this one. Please, never mind the buttons etc. It is still a work in progress. ;)
I m having a subform in datasheet view. whn i use a join query as the record source for the sub form, i am not able to add or update any record in the datasheet. Is there anyway to use a linked query as record source of the datasheet with editable property.
Is there anyway that we can do cascading combobox in the same datasheet view of subform? Basically I'd like to filter "Account Name" based on "Plan#" selected in the same record of subform.
I have a subform in which I display a table in Datasheet View. The problem is, I cannot figure out how to place the columns in the order (i.e. from left to right) I want.
For some reason, right-clicking on a column header in Form View and selecting Freeze Fields will shift that column to the left but I can find no consistent pattern to it and no other way of shifting a column. Reordering the columns in the table itself seems to have no effect on the order they appear on the subform and moving the controls around in the subform in Design View also seems to have no effect.
I have a subform whose design I am trying to change. When I make changes such as moving fields or adding fields the changes appear in form view (and layout view), but not in datasheet view. However, if I delete fields, the changes appear in both form and datasheet view.
This situation results in behavior where I can have the subform open in design view and toggle back and forth between design and datasheet view, and they are different. However, toggling between design and form view shows the changes as having taken effect.
I have a subform that is in Datasheet view. If I open this subform on it's own, the Date Picker works for the Date field. However, if I open the main form with the subform on it, the date picker doesn't work? Nothing happens when I select a date on the calender.
I have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
Hi everyone!! This is my first thread in this forum..Hope to get best from this site ..well i m facing a problem..i have a main form and a subform (which is in datasheet view) . Now i have a button called "close_form" in main form on whose click event i have writen this code :
Private Sub close_form_Click() On Error Resume Next DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70 Me.Controls.Item("fees sub").SetFocus DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70 DoCmd.Close End Sub
1. If i run this form directly from Access and there are no changes i do in the form and click this button then it gets hang after showing error "run time error 2046 ; the command or action undo is not available now " "press End or Debug or help"
2. As i have created a Custom menu, if i run this form from that menu then it does not show any error. But it runs fine for the first time but nothing happens on clicking this button the second time i open the same form ( in same session). What to do ?? Please help .. shikha
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
I have a form which is opened with a filter from another form. For some reason it views the form in form view, although it was set up as datasheet view. I even went to the form properties and the default was datasheet and i made it not to allow other views. This still didnt solve it. I want it to be in datasheet view because i want to show multiple records at the same time.
If u kno how i could resolve this please offer ur help
I have a main form with a control that can take one of three values. And I would like to add a subform that work as follows.
Selecting each value should change what the subform displays like this. Control Subform A Select * from TableA where Key = "A" B Select * from TableB where Key = "B" C Disable subform somehow because it doesn't apply
Could someone please provide some advice on how I could do this.
I am assuming Access cannot handle Many to Many relationships very well.
I have an Account form ("MainForm") with an embedded SubForm that displays only the Account Address with suite number, street number, street name, street type. Account to Address is a Many to Many relationship. My Account form's source is tblAccount, and the SubForm is built off of a query of 3 tables -- Querying Account, LinkTable, and Address table. The link between the SubForm and the "MainForm" is done via AccountID.
My problem is, when I query for an Address (say entering a street number of 25), I want to get back all the addresses with street number of 25 AND the corresponding Accounts that have street number 25 only
What it does is return the addresses with Street Number 25 and ALL the accounts regardless of what their addresses are!
Is there a way to do this?? Can I design a form without using a SubForm in this case, ie, display the account and its many addresses? Or does Access Forms not support Many to Many Relationships? I'm thinking the link table is causing the problems here.
Please advise -- this "simple" project is becoming quite the headache! :eek:
"edit" -- I also notice this problem with a 1 to Many relationship (the "many" portion being the subform)
I had a text box on a main form linked to a text box on a sub form using the following control source =Forms!Form![frm_Doctors_details subform].[Form].[Title]. This was working, however I had to play around with the subform alot and now the link isn't working. All i get in the field is #name?. Nothing has changed on the subform textboxs, just that I added a primary key to assist in the linking action bewteen forms. I can't for the life of me get it back to what it was . any ideas??
