UPDATE DISTINCTROW indicateur set libelle_court='% revues tenues / revues prévues sur projet', description='',cle_tri='',id_priodicite=1,calcule= '0',resitute='0',origine='',seuil_min=9,52,seuil_m ax=1 WHERE id=2;
This gives me an error...I found out that if I put 9,00 (this is the symbolic representation of 9.00 in French system) then it works fine. It does not take any thing after the decimal...
Hello, This may sound too common a question, but I really need help on it. Prior querries in the same do not seem to solve it.
I have two tables, table1 and table2 with the following fields table1 ( ACID, name, address, Salary, MStatus,Age) table2 ( ACID,salary, Age)
ACID is the common field in the two tables ( primary key in table1)
Required
I need to update table1 with the colums in table2 for all the similar ACID in in table1.
Basically, after teh update, table1 will have all the information it had before the update, but a few fields will have changed coz of teh new information coming from table2.
Please help with the code. I'm using access, and the table structures are all the same.
I have these three tables A, B, C and D. IN table A, SSN is the primary key. Tables B, C, and D have other columns, but the also have SSN as one of the columns. Also SSN is NOT required in other tables.
What I need to do is to be able to run an update querry that will update the value of the SSN in table A, and in any other table that will have that SSN.
I have a table in access. The columns are State, FICO, LTV, DTO,LBI and Grade need to update the column (Grade) so that it gets the values A, B, C or D based on the following conditions
If FICO >525 and LTV <100 AND DTI <50 then grade = D IF FICO >600 AND LTV BTWN 90 -100 AND DTI <50 Grade =c If FICO >600 AND LTV <90 AND DTI<45 Grade =B IF FICO >680 AND LTV <90 AND DTI<45 grade =A IF FICO >720 AND LTV <100 AND DTI<50 Grade =A
Please help me figure out the ACCESS select querry for this.
I'm new to access (wiz at excel) and I'm having a problem updating some records. I have table named "Updated 01-22-07". Within that file I'm trying to updated the Shipper_Name field. The file I'm looking to update it from is called "Party City Offical Vendor List 01-22-07".
The common thread in both files is the Vendor #. Where the vendor # is the same I would like the Shipper_Name field in "Updated 01-22-07" to up to the data in the Vendor Name fileld of table "Party City Offical Vendor List of 01-22-07".
I have banged around several queries and can't seem to get it to work. Any thoughts?
I am getting some error with this querry. It gives me an error saying "Too few parameters"....can anybody tell me what exactly is wrong in this???
"SELECT id_indicateur FROM processus_indicateur,processus_projet WHERE [processus_indicateur].id_processus = [processus_projet].id_processus AND processus_projet.id_projet='" & cmb_projet.Value & "' AND indicateur.id_periodicite= '& idper' "
I have a database that I imported as a comma deliminated csv file. To keep my original text comas intact I changed all the commas to semicolons before I created the csv file and imported the data. I now have a data base with semicolons in place of the original commas.
I am trying to use the update query function to change all the semicolons back to commas in one of the database fields called File_name
I have a data entry where a record in the File_name field looks like this for example
Chevrolet cavalier; red
and I want to change it so that it looks like
Chevrolet cavalier, red
I run an update query with the criteria set as Like "*;*"
and this finds all the records which have a semicolon in them
I have set the update field to "*,*"
but all this does is to change the record from
Chevrolet cavalier; red
to
*,*
Is the query update the way to go and what is the syntax that I should be using in the Update field just to change the semicolon to a comma and leave the other text intact?
Could you please help me to make a query with the below conditions from the attached test.mdb file?
1. Enq Received Date 10 days before the search date AND/OR 2. Technical Sub Date 4 weeks in advance of the search date AND/OR 3. Potential Date 4 weeks in advance of the search date
The querry will display all the records which satisfies the above conditions.
I have a table, [temp_indicateur] which has fields [id,libelle_court,description,calcule,resitute,orig ine,seuil_min,seuil_max] [number,text,text,boolean,boolean,boolean,number,nu mber]
My querry is this: insert into temp_indicateur (id,libelle_court,description,origine) values (" & rs!id & ",'" & rs!libelle_court & "','" & rs!description & "'," & rs!origine & ")"
But it gives me an error: Too little parameters
The table has no primary keys and no foreign keys. rs!id is the value of an earlier querry which I am running. Independently, I get the values of rs correctly but I can't get them to execute in this querry.
THis is my sample table with two columns. Property A can have 3 values 1,2 and 3. I want TO SELECT 4 columns such as classname, CountOf1, CountOf2, CountOf3. I just want ClassA in one row and at the same time get the number of 1's, 2's and 3's for that classA in seperate columns in the same row. I appreciate your time. Please Let me know how to write this querry.
I Have A Querry That Adds The Amount Of A Certain Light Bulbs I Have Order Since 2003. I Then Subtract The Amount Of That Light Bulb I Have On Hand Now...it Gives Me The Amount I Have Used Since 2003. Now I Want The Querry To Take That Number And Divide It By The Numberber Of Months Its Been When The Querry Was Open.
Example...i Open The Querry 10-23-06 It Tells Me The 60 Watt Bulb Has Been Ordered 900 Times Since 12-2003 I Have 300 In Stock On 10-23-06 I Have Used 600 Since 12-2003
The Querry Needs To Give Me This Answer You Use 17 60 Watt Bulbs A Month
hello all, i would very much like anyones help with this,, i'm hoping its not too much to ask,, the story is a sfollows,,, i have two tables both conatining the same fields,, table 1 has approx 1k entries, where table 2 has approx 400 entries,, the data in table 2 is the newer data. what i would like to do is run a querry that would enable me to 'post' the data from table2 into table1,, for example table 1 has activity jc111 at 10% where table2 has jc111 at 20%,, if i could simply run this querry that would generate a new table or just up-date table1 my life would be very much better,, i really appreciate anyones help - please remember that i'm quite new to this thank you very very much in advance best regards
I managed to get a query working so that i can search the PERSON table searched by surname
PARAMETERS [PSurname] Text ( 255 ); SELECT PERSON.PReference, PERSON.PName, PERSON.PSurname, PERSON.PTel, PERSON.PMail FROM PERSON WHERE (((PERSON.PSurname)=[PSurname]));
but i cant get it to work i wanted to search it by PReference
PARAMETERS [PReference] Text ( 255 ); SELECT PERSON.[PReference], PERSON.[PName], PERSON.[PSurname], PERSON.[PTel], PERSON.[PMail] FROM PERSON INNER JOIN RGA ON PERSON.PReference=RGA.PReference WHERE (((PERSON.PReference)=[PReference]));
I get a msg that The expression is typed incorectly or is to complex to be evaluated. For example a numeric expression my contain too many complecated elements. Try symplyfing the expression by assigning parts if the expression as variables.
AND THIS IS NO HELP FOR ME... francly
The same situation is with all the other tables- its possible (query- search) for everything apart for the primary keys.
I prepared a querry gathering data from all those tables. I managed to get it work with parameter like the one below with surname
PARAMETERS [PSurname] Text ( 255 ); SELECT COMPANY.*, RGA.*, PERSON.PName, PERSON.PSurname, COMPANY.CName, GOOD.GDescription FROM PERSON INNER JOIN (GOOD INNER JOIN (COMPANY INNER JOIN RGA ON COMPANY.CReference = RGA.CReference) ON GOOD.GUpc = RGA.GUpc) ON PERSON.PReference = RGA.PReference WHERE (((PERSON.PSurname)=[PSurname]));
but the same situation again, i cant get it to work if i want to get it for RGAReference, CReference, PReference,GUpc
I don't know what i am doing wrong? have I designed it all wrong or is it just a small thing...
Thank you for all your help
My problems started when I tried to run a querry that will return the GDescription (this tables store data about 3000 products)
I have created a search form made up of a number of different boxes. In my querry for the search I am using the following statement:
Like "*" & [Forms]![Search]![ExerciseName] & "*"
I a have a number of theses all saying similar things. At present I have to put something in each of the search boxes. Is there a way that I can leave a box blank and still search by other criteria. If I leave a box blank at present it returns no results.
Hello All This might be an easy problem but I am not quite sure how to go about solving it. Presently I have a querry that is linked to a form so that when a person selects a role from the drop down list and you click search it uses the elment selected in the drop down list to show the coreesponding users. My probelme now is that I want to be able to select two different roles and use this querry to give me the users corresponding to these 2 roles. I would really appreciate your help what I have tired to do is create a new combo box and named it role 1 (the first one was named role) and then in the query in the criteria i tired to put the following [Forms]![Users To Role Search Engine]![Role, Role1]but that give me nothing I am sure there is a flaw in my logic but I am not sure how to solve this. Thank you for your help
I am running a querry, but it is not selecting any data... Now I have checked all the stuff..everything is fine except the date part.
strSQL = "select periodicite.libelle as pl,indicateur.libelle_court as il,valeur.valeur,valeur.date_valeur,valeur.id_proj et" & _ " FROM valeur,indicateur,periode,periodicite" & _ " WHERE valeur.id_indicateur=indicateur.id " & _ " AND periodicite.id= " & cmb_periodicite.Value & "" & _ " AND periodicite.id=periode.id_periodicite" & _ " AND periode.id=valeur.id_periode" & _ " AND valeur.date_valeur BETWEEN #" & txt_date_debut.Value & "# AND #" & txt_date_fin.Value & "# "
I am printing the querry too, so that I can check whether it is giving the correct values from the txt_date_debut and txt_date_fin. I found out that everything is fine. I just can't figure out the problem !!! Can anyone help please????
Hi There I Need A Querry For Commission Sales. I Have 10 Items 7 Items At 2% Of Commission 3 At 4%. Each Salesman Have To reach A Min Of 5000 USD Of Sales Per Month Then All Sales Above That Amount Commission Will Be Calculated. I Need A Querry To Calculate Sales And If Salesman reached The Min Sales Commission Is Calculated .
Record_No <--- This is an autonumber field Est_COE --Date Field Type DATE_DOCR DATE_Followup Progress
I then have used multiple querries that just count records based off of Status:
Example of one of the querry's: SELECT Count(borrower.Record_Number) AS Close_Of_Escrow FROM borrower WHERE (((borrower.Est_COE) Between Date() And (Date()+7)) AND ((borrower.Progress)="active"));
Another Example of one other querry: SELECT Count(Borrower_Journal_Notes.ID) AS Followups_Not_Done FROM Borrower_Journal_Notes WHERE (((Borrower_Journal_Notes.Follow_Up_date)>Date()) AND ((Borrower_Journal_Notes.Followed_Up_Complete) Not Like -1));
Then I put both these querry's into a another querry so i can get the data put into a single form using one record source. (The master querry)
name, project, total_Hours_worked (only if total is >45) for a week by each employees. the query should contain total hours for all the weeks. The table contains week_ID column and dyas worked column. i can create a query which gives me sum of day_hours worked using selecct sum(day_hours) as Total.
but i badly need total sum of week hours worked by each employees. so that i can generate overtime report grouped on weekly who has woked more than 45 hours per week.
the table is attached. please see and help me if you can.
Hi, I have a paramter querry, which asks for "Name" If I want to open it. Now If I open, It asks "Enter parameter value" I want it should change text As " Enter Name" Secondly I want a drop down list in enter name text box , Instead of typing name , I would like to choose one from the list. is it possible , If yes Please Help. Best Regards
hello all, i would be extreemly grateful if anyone could offer me some help with this,, basically i have two tables containing the same fields,, one of the table has approx 3k entries where the other has approx 100 entries,, table two (the smaller table) has the same data the only difference being the percentage filed will have increased. for example Tabel 1 has JC111 at 10% and Table 2 has JC111 at 20%,, my life would be made so very much happier if i could find a method of running an up-date query that would take the 'new' % values from table 2 and post them into or create a new table that has the correct/new %'s. i really hope this makes some sense,, i would appreciate anyones help best regards
I have 3 unique numbers that can identify a specific customer. I would like to my form to locate a specific customer by using whichever parameter the customer can find. Is putting 3 seperate queries on the form the best way to acomplish this?
